ആമുഖം
This instruction manual provides comprehensive guidance for the Lancom AirLancer Cable NJ-NP Out/3 m. It covers essential information regarding the cable's purpose, proper setup procedures, operational considerations, routine maintenance, and troubleshooting tips. Adhering to these instructions will ensure optimal performance and longevity of your cable.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Lancom AirLancer Cable NJ-NP Out/3 m is a high-quality, durable coaxial cable designed for reliable outdoor antenna connections. It features N-type male and female connectors, ensuring secure and efficient signal transmission for various networking applications. Its robust construction makes it suitable for demanding outdoor environments.
A coiled black coaxial cable with silver N-type male and female connectors on each end, designed for outdoor use. The cable is approximately 3 meters in length and features durable insulation suitable for external installations.
പ്രധാന സവിശേഷതകൾ:
- തരം: Coaxial Cable (RG 223/U)
- കണക്ടറുകൾ: N-Type Male to N-Type Female
- നീളം: 3 മീറ്റർ
- പ്രതിരോധം: 50 ഓം
- അപേക്ഷ: Designed for outdoor use, suitable for antenna connections.
സജ്ജമാക്കുക
Proper installation of the Lancom AirLancer Cable is crucial for optimal performance. Follow these steps to connect the cable:
- കണക്ടറുകൾ തിരിച്ചറിയുക: Locate the N-type male connector on one end and the N-type female connector on the other end of the cable.
- ആന്റിനയിലേക്ക് ബന്ധിപ്പിക്കുക: Attach the appropriate connector (typically N-type male) to your outdoor antenna's N-type female port. Ensure the connection is finger-tight and secure.
- ഉപകരണത്തിലേക്ക് കണക്റ്റുചെയ്യുക: Attach the other end of the cable (N-type female) to the N-type male port of your networking device, such as an access point, router, or surge protector. Again, ensure a secure, finger-tight connection.
- കേബിൾ റൂട്ടിംഗ്: Route the cable carefully, avoiding sharp bends, kinks, or areas where it might be pinched or damaged. Use cable ties or clips to secure it if necessary.
- കാലാവസ്ഥ സംരക്ഷണം: For outdoor installations, consider using weatherproofing tape or sealant around the connectors to prevent moisture ingress, especially in exposed areas.
കുറിപ്പ്: Always handle connectors by their metal bodies, not by the cable itself, to prevent damage to the internal wiring.
പ്രവർത്തിക്കുന്നു
The Lancom AirLancer Cable NJ-NP Out/3 m is a passive component designed to transmit radio frequency (RF) signals between an antenna and a compatible device. Once properly installed and connected, the cable operates continuously without requiring user intervention. Its function is to provide a low-loss pathway for RF signals, ensuring reliable communication for your wireless network.
Ensure that both connected devices (antenna and networking equipment) are powered on and configured correctly according to their respective manuals for the cable to facilitate signal transmission effectively.
മെയിൻ്റനൻസ്
Regular maintenance helps preserve the performance and extend the lifespan of your Lancom AirLancer Cable:
- വിഷ്വൽ പരിശോധന: Periodically inspect the entire length of the cable and its connectors for any signs of physical damage, such as cuts, abrasions, severe bends, or corrosion on the connectors.
- കണക്റ്റർ ക്ലീനിംഗ്: If connectors appear dirty or corroded, gently clean them using a soft, lint-free cloth and a small amount of electrical contact cleaner. Ensure connectors are dry before re-connecting.
- സുരക്ഷിത കണക്ഷനുകൾ: Verify that all cable connections remain tight and secure. Loose connections can lead to signal degradation.
- പരിസ്ഥിതി സംരക്ഷണം: For outdoor installations, ensure that any weatherproofing applied to the connectors is intact and providing adequate protection against moisture and UV exposure. Reapply if necessary.
- സംഭരണം: If the cable is to be stored, coil it loosely without sharp bends and store it in a clean, dry environment away from extreme temperatures and direct sunlight.
ട്രബിൾഷൂട്ടിംഗ്
If you experience issues with your network connection that you suspect are related to the cable, consider the following:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Poor or No Signal | അയഞ്ഞ കണക്ഷനുകൾ കേടായ കേബിൾ തെറ്റായ കേബിൾ തരം | Ensure all connectors are securely tightened. Inspect the cable for visible damage; replace if necessary. Verify the cable is the correct 50 Ohm impedance for your equipment. |
| ഇടവിട്ടുള്ള കണക്ഷൻ | കോറോഡ് കണക്ടറുകൾ കേബിളിന് ചെറിയ കേടുപാടുകൾ പാരിസ്ഥിതിക ഇടപെടൽ | Clean connectors thoroughly. Inspect for subtle damage; consider replacing if issues persist. Ensure proper grounding and shielding of your setup. |
| Physical Damage to Cable/Connectors | തെറ്റായ കൈകാര്യം ചെയ്യൽ പരിസ്ഥിതി എക്സ്പോഷർ | Handle the cable by its body, not by the connectors. Ensure proper weatherproofing for outdoor use. Replace damaged components. |
സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Lancom AirLancer Cable NJ-NP Out/3 m:
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| ബ്രാൻഡ് | ലാൻകോം |
| നിർമ്മാതാവ് | ലാൻകോം |
| മോഡൽ | LS61230 |
| ഭാഗം നമ്പർ | 4044144612305 |
| കേബിൾ തരം | Coaxial (RG 223/U) |
| കണക്ടറുകൾ | N-Type Male to N-Type Female |
| പ്രതിരോധം | 50 ഓം |
| നീളം | 3 മീറ്റർ |
| ഉൽപ്പന്ന അളവുകൾ | 310.01 x 257.99 x 40.01 സെ.മീ |
| ഇനത്തിൻ്റെ ഭാരം | 358.34 ഗ്രാം |
| ആദ്യ തീയതി ലഭ്യമാണ് | ഓഗസ്റ്റ് 7 2012 |
വാറൻ്റി വിവരങ്ങൾ
Specific warranty terms for the Lancom AirLancer Cable NJ-NP Out/3 m may vary depending on your region and the point of purchase. Please refer to the warranty documentation provided with your product or contact your retailer for detailed information regarding warranty coverage and claims procedures.
പിന്തുണ
For technical assistance, product inquiries, or support related to the Lancom AirLancer Cable NJ-NP Out/3 m, please contact your authorized Lancom dealer or visit the official Lancom webപിന്തുണാ ഉറവിടങ്ങൾക്കും ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുമുള്ള സൈറ്റ്.
