1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Delta Axlerodz Bolt-On Bicycle Skewers are designed to enhance the security of your bicycle wheels by replacing standard quick-release skewers. This system utilizes a 5mm Allen key for installation and removal, providing a deterrent against wheel theft. The skewers are constructed from durable materials, including stainless springs and chromoly axle material, ensuring long-lasting performance.
Figure 1.1: Delta Axlerodz Bolt-On Bicycle Skewers in their retail packaging, highlighting key features and specifications.
ചിത്രം 1.2: വിശദമായ ഒരു view of the Delta Axlerodz Security Skewers, designed to prevent bicycle wheel theft.
2 സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: Incorrect installation can result in serious injury. Installation should be performed only by a trained bicycle technician or an individual with sufficient mechanical aptitude and experience in bicycle maintenance.
- Always ensure the skewers are tightened to the specified torque of പരമാവധി 8.5 Nm. Overtightening or undertightening can compromise safety.
- Regularly inspect the skewers for any signs of wear, damage, or corrosion. Replace immediately if any issues are detected.
- Ensure compatibility with your bicycle's frame dropouts. These skewers are designed for most standard 9mm dropouts.
- After installation, perform a thorough check of the wheels to ensure they are securely fastened and spin freely without obstruction.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This section provides instructions for installing the Delta Axlerodz Bolt-On Bicycle Skewers. A 5mm Allen key is required for this procedure.
3.1. അനുയോജ്യതാ പരിശോധന
Before installation, verify that your bicycle's frame dropouts are compatible with the Axlerodz skewers. These skewers are designed for standard 9mm quick-release wheel hubs.
- Front Dropout Dimensions: 95mm MIN – 115mm MAX
- Rear Dropout Dimensions: 132mm MIN – 154mm MAX
Figure 3.1: Diagram illustrating the compatible frame dropout dimensions for the Axlerodz skewers.
Figure 3.2: The Axlerodz skewer head, demonstrating compatibility with standard 9mm dropouts.
3.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
- Remove Existing Skewers: If your bicycle has quick-release skewers, open the quick-release lever and remove the wheel from the frame/fork. Carefully remove the existing skewer from the wheel hub.
- Prepare Axlerodz Skewer: Disassemble the Axlerodz skewer by removing the end nut and spring. Ensure the springs are oriented correctly (narrow end towards the hub).
- Insert Skewer: Insert the Axlerodz skewer through the hollow axle of your wheel hub. Place one spring on each side of the hub, followed by the conical nuts.
- Position Wheel: Place the wheel back into the bicycle's frame (for the rear wheel) or fork (for the front wheel), ensuring the axle sits correctly in the dropouts.
- Tighten Skewer: Using a 5mm Allen key, tighten the conical nut on the skewer. Alternate tightening each side if necessary to ensure even pressure.
- ടോർക്ക് സ്പെസിഫിക്കേഷൻ: Tighten the skewer to a maximum torque of 8.5 എൻഎം. അമിതമായി മുറുക്കരുത്.
- സുരക്ഷ പരിശോധിക്കുക: After tightening, attempt to move the wheel side-to-side to ensure it is firmly secured within the dropouts and does not wobble. The wheel should spin freely without rubbing against the brake pads or frame.
Figure 3.3: Visual representation of the secure design, durable construction, and quick assembly method using a 5mm Allen key.
4. ഓപ്പറേഷൻ
The Delta Axlerodz skewers are designed for a "set and forget" operation, providing enhanced security. Unlike quick-release skewers, they require a tool for removal, which deters opportunistic theft.
- To remove a wheel, simply use a 5mm Allen key to loosen the skewer nut until the wheel can be disengaged from the dropouts.
- To re-install, follow the "Installation Steps" in Section 3.2, paying close attention to the torque specification.
5. പരിപാലനം
Proper maintenance ensures the longevity and continued security of your Axlerodz skewers.
- പതിവ് പരിശോധന: Periodically check the skewers for any signs of bending, cracking, rust, or stripped threads. Inspect the springs for deformation.
- വൃത്തിയാക്കൽ: Clean the skewers with a damp cloth to remove dirt and grime. Avoid harsh chemicals that could damage the material.
- ലൂബ്രിക്കേഷൻ: A light application of grease on the skewer threads can facilitate smoother tightening and prevent corrosion.
- ടോർക്ക് പരിശോധന: After initial rides and periodically thereafter, re-check the skewer torque with a torque wrench to ensure it remains at 8.5 Nm. Vibrations from riding can sometimes cause components to loosen.
- സംഭരണം: If removing wheels for storage or transport, store the skewers and springs together to prevent loss.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Wheel feels loose or wobbles after installation. | Skewer not tightened sufficiently. | Tighten the skewer to the specified torque of 8.5 Nm using a 5mm Allen key. Ensure the wheel is seated correctly in the dropouts. |
| Difficulty inserting or removing skewer. | Threads are dirty or corroded; skewer is bent. | Clean and lightly lubricate the threads. If the skewer is bent, it must be replaced. |
| Skewer nut spins freely without tightening. | Threads are stripped on the skewer or nut. | Inspect threads. If stripped, the affected component (skewer or nut) must be replaced. |
| Wheel rubs against brake pads or frame. | Wheel not centered in dropouts; skewer not fully tightened. | Loosen skewer, ensure wheel is centered, then re-tighten to 8.5 Nm. Adjust brake calipers if necessary. |
7. ഉൽപ്പന്ന സവിശേഷതകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡലിൻ്റെ പേര് | AxleRodz Security Skewers |
| ഭാഗം നമ്പർ | TD9100 |
| മെറ്റീരിയൽ | Chromoly Axle, Stainless Springs, Aluminum Nuts |
| നിറം | വെള്ളി |
| ഭാരം | 0.15 lbs / 69 grams (per pair) |
| ആവശ്യമായ ഉപകരണം | 5 എംഎം അല്ലെൻ കീ |
| ശുപാർശ ചെയ്യുന്ന ടോർക്ക് | പരമാവധി 8.5 Nm |
| Front Dropout Compatibility | 95mm MIN – 115mm MAX |
| Rear Dropout Compatibility | 132mm MIN – 154mm MAX |
| യു.പി.സി | 799403206606 |
8. വാറൻ്റി വിവരങ്ങൾ
Delta products are designed and engineered in the US. While specific warranty details are not provided in the immediate product information, Delta Cycle typically offers a warranty against defects in materials and workmanship. Please refer to the official Delta Cycle webവിശദമായ വാറന്റി നിബന്ധനകൾക്കും വ്യവസ്ഥകൾക്കും സൈറ്റിൽ സന്ദർശിക്കുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
The product specifications mention a "Warranty Description: 2". This typically refers to a 2-year warranty period. Please confirm with the manufacturer for precise details.
9. ഉപഭോക്തൃ പിന്തുണ
For further assistance, technical support, or to inquire about replacement parts, please contact Delta Cycle customer service. You can often find contact information on the product packaging or the official Delta Cycle webസൈറ്റ്.
സന്ദർശിക്കുക Delta Store on Amazon കൂടുതൽ വിവരങ്ങൾക്കും ഉൽപ്പന്നങ്ങൾക്കും.
For over 35 years, Delta has been a trusted brand in bicycle accessories, known for US-based design and engineering.
