1. ആമുഖം
The BEHRINGER ULTRA-DI DI20 is a versatile direct injection (DI) box designed for both stage and studio applications. It efficiently converts unbalanced 1/4'' TRS line inputs into balanced XLR outputs, providing impedance and signal matching for direct connection of instruments to mixers and amplifiers. Its unique Split mode allows for flexible signal routing, making it an indispensable tool for musicians and audio engineers.
2 പ്രധാന സവിശേഷതകൾ
- മികച്ച ശബ്ദം: Ultra-flat frequency response from 10Hz to 70kHz for pristine audio.
- ആത്യന്തിക ബഹുമുഖത: Converts unbalanced to balanced signals with 1/4" and XLR connectivity.
- കുറഞ്ഞ ശബ്ദ പ്രകടനം: Exceptionally low noise floor of 100dBu for clear recordings.
- Optimized Impedance: Matches instrument or audio source impedance to prevent signal loss.
- Broad Gain Range: Selectable max input range of +12/+32/+52dBu for various input levels.
- Dual Channel/Split Mode: Functions as two independent DI boxes or splits a single signal to two outputs.
- Phantom Power or Battery Operation: Can be powered by mixer's phantom power or a 9V battery.
- ഗ്രൗണ്ട് ലിഫ്റ്റ് സ്വിച്ച്: Eliminates ground loop problems.
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Ultra-rugged, road-suitable metal case.
3. സജ്ജീകരണവും കണക്ഷനുകളും
The DI20 offers flexible connectivity for various audio setups. Ensure all connections are secure before powering on the unit.
3.1 ഫ്രണ്ട് പാനൽ ഓവർview
Figure 1: Front panel of the Behringer Ultra-DI DI20, highlighting the input/output jacks and control switches.
- CH 1 IN (BAL/UNBAL): 1/4" TRS input for Channel 1. Accepts both balanced and unbalanced signals.
- CH 2 IN (CH 1 OUT LINK): 1/4" TRS input for Channel 2. Also functions as a link output for Channel 1 when in Split mode.
- CH 1 OUT (BAL/UNBAL): XLR output for Channel 1. Provides a balanced or unbalanced signal.
- CH 2 OUT (BAL/UNBAL): XLR output for Channel 2. Provides a balanced or unbalanced signal.
- ATTENUATION Switch: Adjusts input sensitivity (0 dB, 20 dB, 40 dB) to prevent clipping from hot signals.
- MODE Switch (LINK/2-CH): Selects operation mode. "2-CH" for two independent channels, "LINK" for splitting Channel 1's signal to both outputs.
- GROUND Switch (LIFT/GND): Lifts the ground connection to eliminate hum caused by ground loops.
- BATTERY Switch (ON/OFF): Powers the unit using a 9V battery.
3.2 Powering the DI20
Figure 2: Bottom panel of the Behringer Ultra-DI DI20, revealing the 9V battery compartment.
The DI20 can be powered in two ways:
- 9V ബാറ്ററി: Insert a 9V battery into the compartment on the bottom of the unit. Ensure the BATTERY switch is set to "ON". The battery automatically shuts off when phantom power is applied.
- ഫാന്റം പവർ: Connect the XLR outputs to a mixer or device that provides +18V to +48V DC phantom power. The unit will automatically draw power from the phantom source.
4 ഓപ്പറേറ്റിംഗ് മോഡുകൾ
The DI20 offers two primary operating modes, selectable via the MODE switch:
4.1 Two-Channel Mode (2-CH)
In this mode, the DI20 functions as two independent direct boxes. Each channel (CH 1 and CH 2) operates separately, converting its respective 1/4" input to an XLR output. This is ideal for connecting two different instruments (e.g., two guitars, or a guitar and a keyboard) to a mixer.
4.2 Link/Split Mode (LINK)
When the MODE switch is set to "LINK", the signal from CH 1 IN is split and sent to both CH 1 OUT and CH 2 OUT. This allows you to send a single instrument's signal to two different destinations simultaneously. For example, you can send one output to the main mixer for the house sound and the other to a guitar amplifier on stagനിരീക്ഷണത്തിനായി ഇ.
5. പരിപാലനം
The Behringer Ultra-DI DI20 is built for durability. To ensure its longevity:
- യൂണിറ്റ് വൃത്തിയായി സൂക്ഷിക്കുക, പൊടിയും അവശിഷ്ടങ്ങളും ഒഴിവാക്കുക.
- തീവ്രമായ താപനിലയിലോ ഈർപ്പത്തിലോ യൂണിറ്റ് തുറന്നുകാട്ടുന്നത് ഒഴിവാക്കുക.
- When not in use, switch the BATTERY to "OFF" to conserve battery life.
- If using battery power, replace the 9V battery when the indicator light dims or the audio signal weakens.
6. പ്രശ്നപരിഹാരം
സാധാരണ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും:
- ശബ്ദമില്ല: Check all cable connections. Ensure the unit is powered (battery "ON" or phantom power active). Verify input and output levels.
- Hum or Buzz: Activate the GROUND LIFT switch. Ensure all cables are in good condition and properly shielded. Check for other electrical interference in the setup.
- വികലമായ ശബ്ദം: Reduce the input signal level using the ATTENUATION switch (20 dB or 40 dB) if the source signal is too hot.
- ബാറ്ററി പെട്ടെന്ന് തീർന്നു: Ensure the BATTERY switch is set to "OFF" when the unit is not in use. Replace with a fresh 9V battery.
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| പവർ ഉറവിടം | Battery Powered (9V) or Phantom Power (+18V to +48V DC) |
| ചാനലുകളുടെ എണ്ണം | 2 |
| ഇനത്തിൻ്റെ ഭാരം | 8.5 ഔൺസ് (0.53 പൗണ്ട്) |
| ഉൽപ്പന്ന അളവുകൾ | 4.13 x 2.52 x 1.61 ഇഞ്ച് |
| കണക്റ്റിവിറ്റി ടെക്നോളജി | XLR |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Active 2 Channel DI Box |
| മെറ്റീരിയൽ | Metal (Others) |
| മോഡലിൻ്റെ പേര് | DI20 |
| നിർമ്മാതാവ് | ബെഹ്രിംഗർ |
8. വാറൻ്റിയും പിന്തുണയും
വിശദമായ വാറന്റി വിവരങ്ങൾക്കും സാങ്കേതിക പിന്തുണയ്ക്കും, ദയവായി ഔദ്യോഗിക ബെഹ്രിംഗർ കാണുക. website or the full User Guide PDF available at https://manuals.plus/m/2978c9184d63e12429de820d4c17bdd6dd24c242aa8f65c2f708e4bbbf91f349.
Behringer is committed to providing high-quality audio solutions. Should you encounter any issues not covered in this manual, please contact Behringer customer support.
