Watts SVGE10 Pre-Cut Clear Vinyl Tubing

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Watts SVGE10 Pre-Cut Clear Vinyl Tubing is designed for various applications requiring flexible, clear, and durable fluid transfer. Made from plasticized Polyvinyl Chloride, it offers the flexibility of rubber and the clarity of glass. Its smooth, dense bore maximizes flow and minimizes sediment buildup. This tubing is resistant to acids, alkalis, and many solvents, making it suitable for a wide range of chemicals, gases, and liquids. It is certified to NSF 61 section 9 Clean Drinking Water standard, though it is explicitly stated not for use with ice makers.

പ്രധാന സവിശേഷതകൾ:

• Pre-cut clear vinyl tubing.
• 3/8-Inch OD x 1/4-Inch ID x 10 foot length.
• Polyvinyl chloride construction provides flexibility and glass-like clarity.
• Handles a wide variety of chemicals, gas, and liquids, with excellent resistance to acids, alkalis, and many solvents.
• Not for use with ice makers.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This clear vinyl tubing is designed for ease of use in various fluid transfer applications. Ensure the tubing is compatible with the intended fluid and pressure requirements before installation.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. കണക്ഷൻ പോയിന്റുകൾ തയ്യാറാക്കുക: Ensure that the barb fittings or connection points are clean and free from debris. The tubing is designed to expand perfectly over standard barb fittings of appropriate size.
2. Cut to Length (if necessary): If a shorter length is required, use a sharp utility knife or tubing cutter to make a clean, straight cut. Avoid jagged edges that could compromise the seal.
3. ട്യൂബ് അറ്റാച്ചുചെയ്യുക: Gently push the tubing over the barb fitting. For a tighter fit, you may briefly warm the end of the tubing in warm water to increase flexibility. Ensure the tubing is fully seated over the barb to create a secure, leak-proof connection.
4. Secure Connections (Optional but Recommended): For high-pressure applications or added security, use hose clamps (not included) to further secure the tubing to the fittings.
5. Route the Tubing: Route the tubing to avoid sharp bends or kinks that could restrict flow. The tubing's flexibility allows for various routing configurations.
6. ചോർച്ചയ്ക്കുള്ള പരിശോധന: After installation, slowly introduce the fluid and carefully inspect all connections for any signs of leaks.

പ്രധാന കുറിപ്പ്: This tubing is not recommended for use with ice makers due to specific material requirements for such applications.

3. പ്രവർത്തന മാർഗ്ഗനിർദ്ദേശങ്ങൾ

Once installed, the Watts SVGE10 Clear Vinyl Tubing operates passively as a conduit for fluid transfer. Observe the following guidelines for optimal performance:

• ദ്രാവക അനുയോജ്യത: Verify that the fluid being transferred is compatible with PVC material to prevent degradation of the tubing.
• താപനില പരിധി: Ensure the operating temperature of the fluid remains within the tubing's specified range of 23°F to 149°F (-5°C to 65°C).
• സമ്മർദ്ദ പരിധി: Do not exceed the maximum working pressure of the tubing (20 PSI to 60 PSI, depending on temperature and application) to prevent bursting or leaks.
• വിഷ്വൽ പരിശോധന: Periodically check the clear tubing for any signs of discoloration, cloudiness, or sediment buildup, which may indicate a need for cleaning or replacement.
• കിങ്കുകൾ ഒഴിവാക്കുക: Ensure the tubing is not kinked or pinched during operation, as this can restrict flow and potentially damage the tubing.

4. പരിപാലനം

Regular maintenance helps prolong the life and effectiveness of your vinyl tubing.

• വൃത്തിയാക്കൽ: If sediment or discoloration is observed, disconnect the tubing and flush it with an appropriate cleaning solution compatible with PVC and the transferred fluid. Rinse thoroughly with clean water.
• പരിശോധന: Routinely inspect the entire length of the tubing for cracks, abrasions, hardening, or any signs of wear. Pay close attention to connection points for potential leaks.
• സംഭരണം: If storing the tubing, ensure it is clean, dry, and coiled loosely to prevent kinks. Store in a cool, dry place away from direct sunlight and extreme temperatures.

5. പ്രശ്‌നപരിഹാരം

Common issues with vinyl tubing are usually related to installation or environmental factors.

• കണക്ഷനുകളിലെ ചോർച്ചകൾ:
  • Ensure tubing is fully seated on the barb fitting.
  • Check for proper hose clamp installation and tightness (if used).
  • Inspect the tubing end for damage or improper cuts. Recut if necessary.
• കുറഞ്ഞ ഒഴുക്ക്:
  • Check for kinks or sharp bends in the tubing. Reroute if needed.
  • Inspect for internal blockages or excessive sediment buildup. Clean the tubing as described in the Maintenance section.
• Tubing Hardening/Cracking:
  • This can occur due to prolonged exposure to incompatible chemicals, extreme temperatures, or UV light. Replace the tubing if signs of degradation are present.

6 സ്പെസിഫിക്കേഷനുകൾ

7. ഉൽപ്പന്ന മാധ്യമങ്ങൾ

ഉൽപ്പന്ന ചിത്രം:

Image of the Watts SVGE10 Pre-Cut Clear Vinyl Tubing, showing its transparent material and coiled form.

8. വാറൻ്റിയും പിന്തുണയും

വാറൻ്റി വിവരങ്ങൾ:

Watts Regulator Company (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.

ഉപഭോക്തൃ പിന്തുണ:

For technical assistance, troubleshooting, or warranty claims, please contact Watts customer support. Refer to the product packaging or the official Watts webഏറ്റവും പുതിയ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.

Webസൈറ്റ്: www.watts.com