ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your PerTronix 1847V Ignitor Electronic Ignition Conversion Kit. This kit is designed to replace traditional mechanical points in Bosch 4-cylinder distributors, enhancing ignition performance and reliability.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The PerTronix 1847V Ignitor is an electronic ignition system that eliminates the need for mechanical points and condenser. It utilizes a Hall Effect integrated circuit and rotating cobalt magnets to provide precise, stable timing and increased spark energy.
ചിത്രം 1: Complete PerTronix 1847V Ignitor kit showing the electronic module, magnetic sleeve, wiring, and mounting hardware.
ബോക്സിൽ എന്താണുള്ളത്:
- Ignitor Electronic Module (1847V)
- Magnetic Sleeve
- കണക്ടറുകളുള്ള വയറിംഗ് ഹാർനെസ്
- Mounting Plates and Screws
- Installation Instructions (refer to this manual)
പ്രധാന സവിശേഷതകൾ
- Points Replacement: Converts mechanical points ignition to a reliable electronic system.
- മെച്ചപ്പെടുത്തിയ പ്രകടനം: Delivers double the voltage to spark plugs, improving horsepower, fuel economy, and extending spark plug life.
- മെയിൻ്റനൻസ്-ഫ്രീ: Epoxy molded design resists dirt, oil, grease, and moisture, eliminating the need for routine adjustments.
- Precise Timing: Utilizes cobalt magnets and a Hall Effect circuit for stable, adjustment-free timing with improved accuracy.
- കോംപാക്റ്റ് ഡിസൈൻ: Fits entirely within the distributor, maintaining a classic under-hood appearance without external ignition boxes.
- വിശാലമായ ആപ്ലിക്കേഷൻ: Suitable for various automotive, marine, industrial, and agricultural applications using compatible Bosch 4-cylinder distributors.
അനുയോജ്യത
The PerTronix 1847V Ignitor Electronic Ignition Conversion Kit is specifically designed for use with Bosch 4-Cylinder Distributors. Verify your distributor type before installation.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: കാൻസർ, ജനന വൈകല്യങ്ങൾ അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന ദോഷങ്ങൾക്ക് കാരണമാകുന്ന കാലിഫോർണിയ സംസ്ഥാനത്തിന് അറിയപ്പെടുന്ന ഈയം ഉൾപ്പെടെയുള്ള രാസവസ്തുക്കളിലേക്ക് ഈ ഉൽപ്പന്നം നിങ്ങളെ എത്തിക്കും. കൂടുതൽ വിവരങ്ങൾക്ക് പോകുക www.P65Warnings.ca.gov.
Always disconnect the vehicle's battery before performing any electrical work. Ensure proper grounding and follow all local safety regulations. Wear appropriate personal protective equipment (PPE) during installation.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Installation of the PerTronix Ignitor kit requires basic mechanical and electrical knowledge. If you are unsure about any step, consult a qualified mechanic.
- തയ്യാറാക്കൽ:
- Disconnect the vehicle's battery (negative terminal first).
- ഡിസ്ട്രിബ്യൂട്ടർ ക്യാപ്പും റോട്ടറും നീക്കം ചെയ്യുക.
- Carefully remove the existing mechanical points and condenser from the distributor.
- ഇഗ്നിറ്റർ മൊഡ്യൂൾ ഇൻസ്റ്റാൾ ചെയ്യുക:
- Mount the Ignitor module in the position previously occupied by the points. Secure it using the provided mounting plates and screws.
ചിത്രം 2: ക്ലോസ് അപ്പ് view of the Ignitor module mounted within a distributor, showing its compact fit.
ചിത്രം 3: The Ignitor module with its mounting plate, illustrating how it secures into the distributor.
- Install Magnetic Sleeve:
- Slide the magnetic sleeve over the distributor shaft, ensuring it sits securely over the cam lobes. This sleeve replaces the function of the points cam.
- കുറിപ്പ്: Some installations may require minor modification to the rotor or distributor shaft for proper fitment of the magnetic sleeve. Refer to specific vehicle service manuals if needed.
- വയറിംഗ് കണക്ഷനുകൾ:
- Connect the Ignitor's red wire to the positive (+) side of the ignition coil.
- Connect the Ignitor's black wire to the negative (-) side of the ignition coil.
- എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും നാശത്തിൽ നിന്ന് മുക്തവുമാണെന്ന് ഉറപ്പാക്കുക.
- Reassembly and Initial Start-up:
- Reinstall the rotor and distributor cap.
- Reconnect the vehicle's battery (positive terminal first).
- Start the engine and check for proper operation.
- Verify ignition timing using a timing light and adjust as necessary according to your vehicle's specifications.
For detailed wiring diagrams and specific vehicle instructions, always refer to the official PerTronix installation guide provided with your product or available on the manufacturer's webസൈറ്റ്.
ഓപ്പറേഷൻ
Once installed, the PerTronix 1847V Ignitor operates automatically, providing a consistent and powerful spark. No user adjustments are required during normal operation. The system continuously monitors engine speed and position to deliver optimal ignition timing.
മെയിൻ്റനൻസ്
The PerTronix 1847V Ignitor is designed to be a maintenance-free ignition system. Unlike traditional points, there are no mechanical components to wear out or adjust. The epoxy-molded construction protects the internal electronics from environmental factors such as dirt, oil, grease, and moisture.
Regularly inspect wiring connections for security and signs of wear or corrosion. Ensure the distributor cap and rotor are in good condition.
ട്രബിൾഷൂട്ടിംഗ്
If you experience issues after installing your PerTronix Ignitor, consider the following common troubleshooting steps:
- No Spark/Engine Not Starting:
- Verify all wiring connections are correct and secure (red to coil +, black to coil -).
- ശരിയായ വോള്യം പരിശോധിക്കുകtage at the ignition coil and Ignitor module.
- Ensure the magnetic sleeve is correctly seated on the distributor shaft and rotates freely.
- Inspect the distributor cap and rotor for cracks or carbon tracking.
- Confirm the ignition coil is compatible with electronic ignition systems.
- റഫ് ഐഡ്ലിംഗ്/മോശം പ്രകടനം:
- Re-check ignition timing with a timing light and adjust to vehicle specifications.
- Ensure spark plug wires are correctly routed and in good condition.
- Verify spark plug gaps are set correctly.
- ഇടയ്ക്കിടെയുള്ള പ്രവർത്തനം:
- അയഞ്ഞ കണക്ഷനുകൾ അല്ലെങ്കിൽ കേടായ വയറിംഗ് പരിശോധിക്കുക.
- Ensure the Ignitor module is securely mounted and not vibrating.
For further assistance, contact PerTronix customer support.
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | 1847V |
| അനുയോജ്യത | Bosch 4-Cylinder Distributors |
| ഇഗ്നിഷൻ തരം | ഇലക്ട്രോണിക് (ഹാൾ ഇഫക്റ്റ്) |
| ഭാരം | 3.2 ഔൺസ് |
| നിർമ്മാതാവ് | PerTronix |
| എക്സ്റ്റീരിയർ ഫിനിഷ് | മെഷീൻ ചെയ്തു |
ചിത്രം 4: Feature comparison table for PerTronix Ignitor, Ignitor II, and Ignitor III electronic ignition systems. This product is the original Ignitor.
വാറൻ്റി വിവരങ്ങൾ
The PerTronix 1847V Ignitor Electronic Ignition Conversion Kit comes with a 30-മാസ പരിമിത വാറൻ്റി. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official PerTronix webസൈറ്റ്.
ഉപഭോക്തൃ പിന്തുണ
For technical assistance, installation questions, or warranty claims, please contact PerTronix customer support directly. Refer to the contact information provided on the product packaging or the official PerTronix webസൈറ്റ്.
