സീലി SA2 എയർ ഇംപാക്ട് റെഞ്ച് 1/2 ചതുരശ്ര ഡ്രൈവ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖവും സുരക്ഷാ വിവരങ്ങളും

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Sealey SA2 Air Impact Wrench. Please read and understand all instructions before using the tool.

പൊതു സുരക്ഷാ മുന്നറിയിപ്പുകൾ:

• കണ്ണ് സംരക്ഷണം, കേൾവി സംരക്ഷണം, കയ്യുറകൾ എന്നിവയുൾപ്പെടെ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ എപ്പോഴും ധരിക്കുക.
• Ensure the air supply is disconnected before changing accessories, performing maintenance, or when the tool is not in use.
• Do not exceed the maximum operating pressure specified for the tool.
• ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് കൈകളും വസ്ത്രങ്ങളും സൂക്ഷിക്കുക.
• Use only genuine Sealey replacement parts and accessories.
• Maintain the tool in good working condition and check for damage before each use.

Figure 1: Sealey SA2 Air Impact Wrench. This image shows the overall design of the impact wrench, highlighting its robust construction and ergonomic grip.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Sealey SA2 Air Impact Wrench is a powerful pneumatic tool designed for various fastening and loosening tasks in garage, tire shop, and general workshop environments. It features a durable rocking-dog hammer mechanism and a hardened impact anvil for reliable performance.

പ്രധാന സവിശേഷതകൾ:

• Fitted with a standard 1/2" Sq drive anvil.
• Equipped with a robust rocking-dog hammer mechanism.
• Hardened impact anvil for extended durability.
• Four-position adjustable air/torque control.
• Reversible action for both tightening and loosening applications.

Figure 2: Key features of the Sealey SA2 Air Impact Wrench. This diagram illustrates the 1/2" Sq drive anvil, fastening and breakaway torque specifications, and the 4-position adjustable air/torque control with reversible action.

3. സജ്ജീകരണം

1. എയർ സപ്ലൈ കണക്ഷൻ: Connect the impact wrench to a clean, dry, regulated air supply. Ensure the air hose has an internal diameter of at least 3/8 inch (10 mm) and is fitted with a suitable quick-release coupling. The recommended operating pressure is 90 psi (6.2 bar).
2. ലൂബ്രിക്കേഷൻ: Before first use and daily thereafter, add a few drops of air tool oil into the air inlet. This is crucial for the longevity and performance of the tool. The tool is marked "OIL DAILY!" as a reminder.
3. പ്രാരംഭ പരിശോധന: Before connecting to the air supply, ensure the trigger is not depressed. Once connected, briefly run the tool to confirm proper operation and lubrication.
4. സോക്കറ്റ് അറ്റാച്ച്മെന്റ്: Select the appropriate 1/2" Sq drive impact socket for your application and firmly attach it to the anvil.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. ദിശ തിരഞ്ഞെടുക്കൽ: Use the F/R (Forward/Reverse) selector switch, typically located near the trigger, to choose the desired direction of rotation. "F" is for fastening (clockwise), and "R" is for loosening (counter-clockwise).
2. ടോർക്ക് അഡ്ജസ്റ്റ്മെൻ്റ്: The tool features a four-position adjustable air/torque control. This allows you to regulate the power output for different applications. Start with a lower setting and increase as needed to prevent overtightening or damage to fasteners.
3. ഉറപ്പിക്കൽ:
   • Set the direction to "F" (Forward).
   • Place the socket firmly onto the fastener.
   • Depress the trigger to operate the tool. Release the trigger to stop.
   • For critical applications, always use a torque wrench to achieve the final specified torque.
4. അയവുള്ളതാക്കൽ:
   • Set the direction to "R" (Reverse).
   • Place the socket firmly onto the fastener.
   • Depress the trigger to operate the tool. Release the trigger to stop.

5. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your Sealey SA2 Air Impact Wrench.

• ദിവസേനയുള്ള ലൂബ്രിക്കേഷൻ: Add a few drops of high-quality air tool oil into the air inlet before each use. This lubricates the internal components and prevents corrosion.
• Air Line Maintenance: Ensure your air compressor's drain valve is opened daily to release accumulated moisture. Regularly check and clean the air filter and lubricator (if installed) in your air supply system.
• പൊതുവായ ശുചീകരണം: Keep the tool clean and free from debris. Wipe down the exterior with a clean cloth. Do not use solvents that may damage the rubber or plastic components.
• പരിശോധന: Periodically inspect the tool for any signs of wear, damage, or loose fasteners. Pay close attention to the anvil, trigger, and air connections. Replace worn or damaged parts immediately.
• സംഭരണം: When not in use, store the impact wrench in a clean, dry, and secure location, away from direct sunlight and extreme temperatures.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Sealey SA2 Air Impact Wrench, refer to the following common troubleshooting steps:

For issues not covered here, or if problems persist, please contact Sealey customer support or an authorized service center.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

The Sealey SA2 Air Impact Wrench comes with a 1 വർഷത്തെ ഗ്യാരണ്ടി. This warranty covers defects in materials and workmanship under normal use. Please refer to the official Sealey website or your purchase documentation for full terms and conditions.

Figure 3: Sealey 1 Year Guarantee. This image indicates the product is covered by a one-year warranty, with terms and conditions applying.

For technical support, warranty claims, or to purchase genuine replacement parts, please contact Sealey customer service through their official channels. Always provide your product model number (SA2) and proof of purchase when seeking support.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Please visit the official Sealey webഏറ്റവും കാലികമായ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കും പിന്തുണാ ഉറവിടങ്ങൾക്കുമുള്ള സൈറ്റ്.