Adcraft SK-500W

Adcraft 11.4 Quart Soup Kettle Warmer

Model: SK-500W

ആമുഖം

This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your Adcraft 11.4 Quart Soup Kettle Warmer, Model SK-500W. Please read all instructions thoroughly before using the appliance to ensure proper function and to prevent injury or damage.

പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ

ബോക്സിൽ എന്താണുള്ളത്

Upon unpacking, ensure all components are present and undamaged:

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

  1. അൺപാക്ക്: Carefully remove all packaging materials from the soup kettle. Retain packaging for future storage or transport if needed.
  2. പരിശോധിക്കുക: ഉപകരണത്തിന് എന്തെങ്കിലും തകരാറുകൾ സംഭവിച്ചിട്ടുണ്ടോ എന്ന് പരിശോധിക്കുക. കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടെങ്കിൽ അത് പ്രവർത്തിപ്പിക്കരുത്.
  3. പ്രാരംഭ ക്ലീനിംഗ്: Before first use, wash the stainless steel insert and lid with warm, soapy water. Rinse thoroughly and dry completely. Wipe the exterior of the kettle base with a damp തുണി.
  4. പ്ലേസ്മെൻ്റ്: Place the soup kettle on a stable, level, heat-resistant surface. Ensure there is adequate ventilation around the unit and that it is not near flammable materials or water sources.
  5. കൂട്ടിച്ചേർക്കുക: Place the clean stainless steel insert into the kettle base.
Adcraft 11.4 Quart Soup Kettle Warmer with stainless steel insert and lid

Image: The Adcraft 11.4 Quart Soup Kettle Warmer, showing its black exterior, stainless steel insert, and hinged lid. The power cord and temperature control knob are visible on the side.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

  1. Fill Water Bath: Pour approximately 0.6 to 0.8 liters (20 to 27 fluid ounces) of water into the kettle base, surrounding the stainless steel insert. Do not overfill; the water level should be below the rim of the insert. This water bath helps to evenly distribute heat and prevent scorching.
  2. ഭക്ഷണം ചേർക്കുക: Place your pre-heated soup, stew, chili, or sauce into the stainless steel insert. The kettle is designed to keep food warm, not to cook it from cold.
  3. സുരക്ഷിതമായ ലിഡ്: Place the slotted stainless steel lid onto the insert. The hinged design allows for easy access and serving.
  4. പവർ ബന്ധിപ്പിക്കുക: Ensure the temperature control knob is set to the "OFF" position. Plug the power cord into a grounded 120V AC electrical outlet.
  5. താപനില സജ്ജമാക്കുക: Turn the temperature control knob clockwise to the desired setting. The temperature can be adjusted from 80°F (27°C) to 200°F (93°C). A red indicator light will illuminate, indicating the unit is heating.
  6. സന്നാഹ സമയം: Allow approximately 20-30 minutes for the water bath and food to reach the set temperature.
  7. സേവിക്കുന്നത്: Use the hinged lid for convenient serving. Always use appropriate serving utensils.
  8. ഉപയോഗത്തിന് ശേഷം: Turn the temperature control knob to the "OFF" position and unplug the unit from the wall outlet. Allow the kettle to cool completely before cleaning.

പരിപാലനവും ശുചീകരണവും

Regular cleaning ensures optimal performance and extends the life of your soup kettle warmer.

  1. പവർ വിച്ഛേദിക്കുക: വൃത്തിയാക്കുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും യൂണിറ്റ് അൺപ്ലഗ് ചെയ്ത് പൂർണ്ണമായും തണുപ്പിക്കാൻ അനുവദിക്കുക.
  2. ഘടകങ്ങൾ നീക്കം ചെയ്യുക: Carefully remove the stainless steel insert and lid.
  3. Clean Insert and Lid: Wash the stainless steel insert and lid with warm, soapy water. Use a non-abrasive sponge or cloth. Rinse thoroughly and dry completely to prevent water spots or mineral buildup. These parts are generally dishwasher safe, but hand washing is recommended for longevity.
  4. വൃത്തിയുള്ള പുറം: Wipe the exterior of the kettle base with a damp cloth. For stubborn stains, use a mild, non-abrasive cleaner. Do not immerse the base in water or spray water directly onto it.
  5. Clean Water Bath Area: Periodically clean the interior of the kettle base where the water bath sits to remove any mineral deposits. Use a descaling solution if necessary, following the product's instructions, then rinse thoroughly with a damp തുണി.
  6. സംഭരണം: Ensure all parts are dry before reassembling or storing the unit. Store in a cool, dry place.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
യൂണിറ്റ് ചൂടാക്കുന്നില്ല.Not plugged in; power switch off; faulty outlet; internal issue.Ensure unit is securely plugged into a working 120V outlet. Check if the temperature control knob is turned ON. Test the outlet with another appliance. If problem persists, contact service.
ഭക്ഷണം ആവശ്യത്തിന് ചൂടാകുന്നില്ല.Temperature setting too low; insufficient warm-up time; lid not properly sealed.Increase the temperature setting. Allow more time for the unit to reach temperature. Ensure the lid is properly seated on the insert. Ensure water bath is filled correctly.
Food is too hot/scorching.Temperature setting too high; no water in the water bath.Reduce the temperature setting. Ensure the water bath is filled with the recommended amount of water.
Water bath is boiling rapidly.താപനില ക്രമീകരണം വളരെ ഉയർന്നതാണ്.Lower the temperature setting. The water bath should simmer gently, not boil vigorously.

സ്പെസിഫിക്കേഷനുകൾ

മോഡൽ നമ്പർSK-500W
ശേഷി11.4 ക്വാർട്ടുകൾ
വാല്യംtage120V
വാട്ട്tage500W
Ampഉന്മേഷം4 Amps
താപനില പരിധി80°F മുതൽ 200°F വരെ (27°C മുതൽ 93°C വരെ)
അളവുകൾ (മൊത്തം)15.9" എൽ x 15.9" W x 14.56" എച്ച്
Material (Exterior)High-impact Plastic
Material (Insert & Lid)സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ
നിറംകറുപ്പ്

വാറൻ്റിയും ഉപഭോക്തൃ പിന്തുണയും

For warranty information, technical assistance, or to inquire about replacement parts, please contact Adcraft customer support. Refer to your purchase documentation or the Adcraft official webനിലവിലെ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.

ആഡ്ക്രാഫ്റ്റ് Webസൈറ്റ്: www.adcraft.com

അനുബന്ധ രേഖകൾ - SK-500W

പ്രീview Adcraft HDS-1300W/100 ഹോട്ട് ഡോഗ് സ്റ്റീമർ - സ്പെസിഫിക്കേഷനുകളും സവിശേഷതകളും
ബൺ കമ്പാർട്ട്‌മെന്റോടുകൂടിയ Adcraft HDS-1300W/100 ടോപ്പ്-ലോഡിംഗ് ഹോട്ട് ഡോഗ് സ്റ്റീമറിന്റെ വിശദമായ സ്പെസിഫിക്കേഷനുകളും സവിശേഷതകളും. അതിന്റെ നിർമ്മാണം, ശേഷി, പ്രവർത്തനം, ഇലക്ട്രിക്കൽ ആവശ്യകതകൾ, വാറന്റി എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview Adcraft LR-2 ക്രമീകരിക്കാവുന്ന ഹീറ്റഡ് പ്ലേറ്റ് ലോവറേറ്റർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ആഡ്ക്രാഫ്റ്റ് LR-2 ക്രമീകരിക്കാവുന്ന ഹീറ്റഡ് പ്ലേറ്റ് ലോവറേറ്ററിനായുള്ള നിർദ്ദേശ മാനുവൽ, 2 ട്യൂബ് 8"-12". മുന്നറിയിപ്പുകൾ, ഇൻസ്റ്റാളേഷൻ, ഉപയോഗം, വൃത്തിയാക്കൽ, ട്രബിൾഷൂട്ടിംഗ്, പാർട്സ് ഡയഗ്രം, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ആഡ്ക്രാഫ്റ്റ് എംജി-1 മീറ്റ് ഗ്രൈൻഡർ ഉപയോക്തൃ മാനുവലും വാറന്റിയും
Adcraft MG-1 മീറ്റ് ഗ്രൈൻഡറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവലും വാറന്റി വിവരങ്ങളും, അസംബ്ലി, പ്രവർത്തനം, വൃത്തിയാക്കൽ, ട്രബിൾഷൂട്ടിംഗ്, വാറന്റി വിശദാംശങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview Adcraft SL300ES, 300ES-12 12" മീറ്റ് സ്ലൈസർ ഇൻസ്ട്രക്ഷൻ മാനുവലും പാർട്സ് ഗൈഡും
Adcraft SL300ES, 300ES-12 12-ഇഞ്ച് മീറ്റ് സ്ലൈസർ എന്നിവയ്ക്കുള്ള ഔദ്യോഗിക നിർദ്ദേശ മാനുവലും പാർട്സ് ഗൈഡും, പ്രവർത്തനം, വൃത്തിയാക്കൽ, അറ്റകുറ്റപ്പണി, ട്രബിൾഷൂട്ടിംഗ്, വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ആഡ്ക്രാഫ്റ്റ് DF-12L & DF-12L/2 ഇലക്ട്രിക് ഫ്രയർ മാനുവൽ: പ്രവർത്തനം, വൃത്തിയാക്കൽ & വാറന്റി
Adcraft DF-12L, DF-12L/2 ഇലക്ട്രിക് ഫ്രയറുകൾക്കുള്ള സമഗ്ര മാനുവൽ. സജ്ജീകരണം, പ്രവർത്തനം, വൃത്തിയാക്കൽ, പാർട്സ് തിരിച്ചറിയൽ, സർക്യൂട്ട് ഡയഗ്രം, ട്രബിൾഷൂട്ടിംഗ്, 1 വർഷത്തെ പരിമിത വാറന്റി ഗൈഡ് എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview ആഡ്ക്രാഫ്റ്റ് റോളർ ഗ്രിൽ RG-05, RG-07, RG-09: മാനുവൽ, സ്പെസിഫിക്കേഷനുകൾ, വാറന്റി
RG-05, RG-07, RG-09 എന്നീ ആഡ്‌ക്രാഫ്റ്റ് റോളർ ഗ്രിൽ മോഡലുകൾക്കായുള്ള സമഗ്ര ഗൈഡ്, പ്രവർത്തന നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മുന്നറിയിപ്പുകൾ, ക്ലീനിംഗ് നടപടിക്രമങ്ങൾ, ഇലക്ട്രിക്കൽ ഡയഗ്രമുകൾ, പാർട്‌സ് ലിസ്റ്റ്, ACE ഇലക്ട്രിക്കൽ ഉപകരണങ്ങളുടെ ഒരു വർഷത്തെ വാറന്റി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.