ഉൽപ്പന്നം കഴിഞ്ഞുview
The RAB C100W is a durable, weatherproof round cover designed for electrical installations. It features a single hole and is finished in white, ensuring protection against outdoor elements.
Image: The RAB C100W Weatherproof Cover, a round, white cover with a central hole and mounting points.
പ്രധാന സവിശേഷതകൾ:
- Die-cast aluminum construction for durability.
- Color-matched finish for aesthetic integration.
- Gasketed design with an 1/8 inch thick closed-cell silicone rubber weatherseal gasket for superior weather protection.
- Strong corrosion-proof polycarbonate components.
- Compliant with Buy American Act and Recovery Act.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This section provides general guidelines for installing the RAB C100W weatherproof cover. Always consult local electrical codes and a qualified electrician for specific installation requirements.
- സുരക്ഷ ആദ്യം: Before beginning any electrical work, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. Verify with a voltagഇ ടെസ്റ്റർ.
- ഉപരിതലം തയ്യാറാക്കുക: Ensure the mounting surface is clean, dry, and flat.
- കവർ സ്ഥാപിക്കുക: Align the C100W cover with the electrical box or fixture it is intended to protect. The central hole should align with the conduit or cable entry point.
- സുരക്ഷിത മൗണ്ടിംഗ്: Use appropriate screws (not included) to securely fasten the cover to the electrical box or mounting surface through the designated mounting holes. Ensure a tight fit to maintain the weatherproof seal.
- ഗാസ്കറ്റ് പ്ലേസ്മെന്റ്: Ensure the 1/8 inch thick closed-cell silicone rubber weatherseal gasket is properly seated between the cover and the mounting surface to create a watertight seal.
- Cable/Conduit Connection: Route the electrical cable or conduit through the central opening. Ensure all connections are made according to electrical standards and local codes.
- അന്തിമ പരിശോധന: Double-check all connections and ensure the cover is firmly secured before restoring power.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The RAB C100W is a passive weatherproof cover and does not have operational controls. Its function is to provide protection for electrical connections and components from environmental factors.
- Once installed, the cover continuously protects the enclosed electrical components from moisture, dust, and other outdoor elements.
- Ensure the cover remains securely fastened to maintain its weatherproof integrity.
മെയിൻ്റനൻസ്
Regular maintenance helps ensure the longevity and effectiveness of the RAB C100W weatherproof cover.
- ആനുകാലിക പരിശോധന: Annually inspect the cover for any signs of damage, cracks, or loose fasteners. Check the integrity of the gasket.
- വൃത്തിയാക്കൽ: Clean the exterior of the cover with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or material.
- ഗാസ്കറ്റ് പരിശോധന: If the gasket appears brittle, cracked, or damaged, it should be replaced to maintain the weatherproof seal.
- ഫാസ്റ്റനർ ദൃഢത: Periodically check and tighten any loose mounting screws to ensure the cover remains securely attached.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues related to the RAB C100W weatherproof cover.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Water ingress/leaks | Damaged or improperly seated gasket; Loose mounting screws; Improper sealing around conduit/cable entry. | Ensure gasket is correctly positioned and undamaged. Tighten all mounting screws. Apply appropriate sealant around cable/conduit entry points if necessary. Replace gasket if damaged. |
| Cover feels loose | മൗണ്ടിംഗ് സ്ക്രൂകൾ അയഞ്ഞതോ ഊരിപ്പോയതോ ആണ്. | Tighten mounting screws. If screws are stripped, use larger screws or appropriate anchors. |
| Corrosion on cover surface | Exposure to harsh chemicals or extreme environmental conditions. | Clean the surface with a mild, non-abrasive cleaner. While the cover is corrosion-proof, extreme conditions can affect surface appearance. |
സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | C100W |
| ബ്രാൻഡ് | RAB ലൈറ്റിംഗ് |
| മെറ്റീരിയൽ | Die-cast Aluminum (cover), Polycarbonate (components), Silicone Rubber (gasket) |
| ആകൃതി | വൃത്താകൃതി |
| നിറം/ഫിനിഷ് | വെള്ള |
| ഇനത്തിൻ്റെ ഭാരം | 3.2 ഔൺസ് |
| വാല്യംtagഇ റേറ്റിംഗ് | 120 വോൾട്ട് |
| വാട്ട്tagഇ റേറ്റിംഗ് | 100 വാട്ട്സ് |
| Gasket Type | 1/8 inch thick closed-cell silicone rubber |
| യു.പി.സി | 019813934075 |
| ആദ്യം ലഭ്യമായ തീയതി | ഓഗസ്റ്റ് 23, 2007 |
വാറൻ്റി വിവരങ്ങൾ
The RAB C100W Weatherproof Cover is covered by a manufacturer's warranty. For specific details regarding warranty terms, conditions, and duration, please refer to the official documentation provided with your purchase or contact RAB Lighting directly.
Note: Warranty coverage typically applies to defects in materials and workmanship under normal use and service. Damage resulting from improper installation, misuse, abuse, or unauthorized modifications may not be covered.
ഉപഭോക്തൃ പിന്തുണ
For technical assistance, product inquiries, or warranty claims, please contact RAB Lighting customer support.
- നിർമ്മാതാവ്: RAB ലൈറ്റിംഗ്
- Webസൈറ്റ്: www.rablighting.com (ദയവായി ഔദ്യോഗിക വെബ്സൈറ്റ് സന്ദർശിക്കുക) web(ഏറ്റവും പുതിയ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്ക് സൈറ്റ് സന്ദർശിക്കുക.)
- പൊതുവായ അന്വേഷണങ്ങൾ: Refer to the contact section on the RAB Lighting webസൈറ്റ്.
