1. ആമുഖവും ഉൽപ്പന്നവും കഴിഞ്ഞുview
The Fluke TP920 Test Probe Adapter Set is designed to enhance the versatility of your existing TL71 and TL75 test probes. This set provides a range of specialized adapters for various electrical testing applications, ensuring accurate and safe measurements.
സെറ്റിൽ ഇവ ഉൾപ്പെടുന്നു:
- IC test adapters
- Extended probe tips
- Medium alligator clips (maximum opening 7.6mm)
ചിത്രം 1: ഓവർview of the Fluke TP920 Test Probe Adapter Set, including IC test adapters, extended probe tips, and medium alligator clips.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The TP920 adapters are designed for quick and secure attachment to Fluke TL71 and TL75 test probes. Ensure your test probes are compatible before attempting installation.
2.1 അഡാപ്റ്ററുകൾ ഘടിപ്പിക്കൽ
- Ensure your test probes are disconnected from any power source and measurement device.
- Select the desired adapter (IC test adapter, extended probe tip, or alligator clip).
- Align the adapter with the tip of your TL71 or TL75 test probe.
- Gently push the adapter onto the probe tip until it is firmly seated. Do not force the adapter, as this may damage the probe or adapter.
- Verify that the adapter is securely attached and does not wobble before use.
ചിത്രം 2: ഉദാample of two adapters, red and black, ready for attachment to test probes.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Always observe safety precautions when performing electrical measurements. The Fluke TP920 Test Probe Adapter Set is rated for CAT III 300V, 3A. Do not exceed these ratings.
3.1 Using IC Test Adapters
IC test adapters are designed for precise contact with integrated circuit pins or other small terminals. Their fine tips allow for accurate measurements in confined spaces without shorting adjacent pins.
3.2 Using Extended Probe Tips
Extended probe tips provide additional reach for accessing recessed or hard-to-reach test points. Use them when standard probe tips cannot make contact.
Figure 3: The extended probe tips offer increased reach for difficult access points.
3.3 Using Medium Alligator Clips
Medium alligator clips provide a secure, hands-free connection to terminals, wires, or components. They are ideal for situations requiring a stable connection for extended periods or when both hands are needed for other tasks. The maximum jaw opening is 7.6mm.
3.4 സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ
- Always ensure the adapters are securely attached to your test probes before making any measurements.
- Do not use damaged adapters or probes. Inspect them before each use.
- Adhere to the maximum voltage (300V) and current (3A) ratings.
- Always follow the safety guidelines provided with your multimeter and the equipment being tested.
4. പരിപാലനം
Proper maintenance ensures the longevity and accuracy of your Fluke TP920 Test Probe Adapter Set.
4.1 വൃത്തിയാക്കൽ
Clean the adapters regularly with a soft, damp cloth. For stubborn dirt, a mild detergent can be used. Ensure the adapters are completely dry before storage or next use. Do not use abrasive cleaners or solvents.
4.2 സംഭരണം
Store the adapters in a clean, dry environment, away from direct sunlight and extreme temperatures. Keeping them in their original packaging or a dedicated tool case can prevent damage and loss.
5. പ്രശ്നപരിഹാരം
If you encounter issues with your Fluke TP920 Test Probe Adapter Set, consider the following common solutions:
- മോശം കണക്ഷൻ: Ensure the adapter is fully seated on the test probe. Check for any debris or damage on the probe tip or inside the adapter.
- കൃത്യമല്ലാത്ത വായനകൾ: Verify that the adapter is clean and free from corrosion. Ensure your multimeter is functioning correctly and calibrated.
- ശാരീരിക ക്ഷതം: If an adapter is bent, cracked, or otherwise damaged, discontinue use immediately and replace it. Using damaged equipment can lead to inaccurate measurements or safety hazards.
If problems persist, refer to the "Support" section for further assistance.
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് | ഫ്ലൂക്ക് |
| മോഡൽ നമ്പർ | TP920 |
| വാല്യംtagഇ റേറ്റിംഗ് | ക്യാറ്റ് III 300 വി |
| നിലവിലെ റേറ്റിംഗ് | 3A |
| ഇനത്തിൻ്റെ ഭാരം | 45 ഗ്രാം (1.59 ഔൺസ്) |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 8.98 x 10.2 x 1.54 ഇഞ്ച് |
| മാതൃരാജ്യം | ചൈന |
| അനുയോജ്യത | Fluke TL71 and TL75 test probes |
7. വാറൻ്റി വിവരങ്ങൾ
The Fluke TP920 Test Probe Adapter Set comes with a 1 വർഷത്തെ വാറൻ്റി from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized modification, or neglect.
For warranty claims or detailed terms and conditions, please retain your proof of purchase and contact Fluke customer support.
8. പിന്തുണ
For technical assistance, product inquiries, or support regarding your Fluke TP920 Test Probe Adapter Set, please visit the official Fluke website or contact their customer service department. Contact information can typically be found on the Fluke webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ്.
When contacting support, please have your product model number (TP920) and any relevant purchase information ready to facilitate faster service.
