Oregon Scientific THGR122NX Water Resistant Remote Sensor Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Oregon Scientific THGR122NX is a water-resistant remote sensor designed to measure both temperature and humidity. It transmits this data wirelessly to a compatible main unit (sold separately) on one of three user-selectable channels. The sensor also features an integrated LCD screen that displays the current temperature and humidity readings directly. This unit is suitable for both indoor and outdoor use, providing versatile environmental monitoring.

Figure 1: Oregon Scientific THGR122NX Water Resistant Remote Sensor with LCD Display.

2. സജ്ജീകരണം

2.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. Open the battery compartment cover located on the back of the THGR122NX sensor.
2. Insert two (2) AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
3. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
4. For optimal performance in very cold conditions, it is suggested to use Lithium AAA batteries.

2.2 സെൻസർ പ്ലേസ്മെന്റ്

For accurate readings, mount the sensor vertically on a north-facing wall or in a well-shaded location to avoid direct sunlight and rain. Direct sunlight can cause the temperature readings to be higher than actual. It is recommended to place the sensor at least 6 inches below eaves or under a deck. The maximum transmission range to the base station is approximately 100 feet (30 meters) in an open area, not including walls or floors.

2.3 Pairing with Main Unit

1. Ensure batteries are installed in both the remote sensor and the main display unit.
2. On the remote sensor, select one of the three available channels (CH1, CH2, or CH3) using the channel switch inside the battery compartment.
3. On the main unit, initiate the sensor search function (refer to your main unit's manual for specific instructions). The main unit should automatically detect and display readings from the remote sensor.
4. If connection is not established, remove batteries from both units, wait a few seconds, and re-insert them, ensuring the remote sensor is powered on first, then the main unit. Repeat the pairing process.

Figure 2: Remote sensor mounted outdoors, demonstrating proper placement for optimal readings.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 എൽസിഡി ഡിസ്പ്ലേ

The THGR122NX sensor features a small LCD display that shows the current temperature and humidity readings directly on the unit. This allows for quick local checks without needing to consult the main unit.

3.2 Temperature and Humidity Readings

• The sensor measures temperature within a range of -22°F to 140°F (-30°C to 60°C).
• Humidity is measured from 25% to 95% relative humidity.
• Readings are updated and transmitted to the main unit approximately every 40 seconds.

3.3 ചാനൽ തിരഞ്ഞെടുക്കൽ

A switch inside the battery compartment allows you to select one of three channels (CH1, CH2, CH3). This is crucial for avoiding interference if multiple sensors are used or if other wireless devices are nearby. Ensure the selected channel matches the setting on your main unit.

4. പരിപാലനം

4.1 വൃത്തിയാക്കൽ

ഒരു സോഫ്റ്റ്, ഡി ക്ലീനർ ഉപയോഗിച്ച് സെൻസർ തുടച്ചു വൃത്തിയാക്കുക.amp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit.

4.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the low battery indicator appears on the main unit or the sensor's LCD, replace the batteries promptly. Always replace both batteries at the same time with new ones of the same type. Dispose of used batteries responsibly according to local regulations.

4.3 പരിസ്ഥിതി സംരക്ഷണം

Although water-resistant, avoid submerging the sensor in water. Protect it from extreme physical shock or vibration.

5. പ്രശ്‌നപരിഹാരം

6 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: THGR122NX
• ബ്രാൻഡ്: ഒറിഗോൺ സയൻ്റിഫിക്
• താപനില അളക്കൽ ശ്രേണി: -22°F മുതൽ 140°F വരെ (-30°C മുതൽ 60°C വരെ)
• ഈർപ്പം അളക്കുന്നതിനുള്ള ശ്രേണി: 25% മുതൽ 95% വരെ RH
• ട്രാൻസ്മിഷൻ ശ്രേണി: Up to 100 feet (30 meters) in open area
• ചാനലുകൾ: 3 user-selectable channels
• ഊർജ്ജ സ്രോതസ്സ്: 2 x AAA ബാറ്ററികൾ (ഉൾപ്പെട്ടിരിക്കുന്നു)
• പ്രത്യേക സവിശേഷത: Water-resistant, LCD Display
• ഉൽപ്പന്ന അളവുകൾ: 3.6 x 1 x 2.4 ഇഞ്ച്
• ഇനത്തിൻ്റെ ഭാരം: 4 ഔൺസ്
• മെറ്റീരിയൽ: പ്ലാസ്റ്റിക്
• നിറം: വെള്ള

7. വാറണ്ടിയും പിന്തുണയും

7.1 വാറൻ്റി വിവരങ്ങൾ

This Oregon Scientific product comes with a 1-year limited warranty from the date of purchase, covering manufacturing defects in materials and workmanship.

7.2 ഉപഭോക്തൃ പിന്തുണ

For further assistance, product registration, or to check compatibility with your existing Oregon Scientific weather station, please visit the official Oregon Scientific webസൈറ്റ്: oregonscientificstore.com/sensors.