ആമുഖം
The Intermatic EI210W Electronic Countdown Timer provides silent operation for various applications, offering time ranges of 10, 20, 30, and 60 minutes. This device is designed for energy savings, enhanced security, and convenience in controlling indoor lighting, outdoor lighting, bathroom fans, exhaust fans, and other appliances. This manual details the installation, operation, and specifications of the EI210W timer.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്: To avoid fire, shock, or death, always turn off power at the circuit breaker and test that power is off before wiring. Electrical work should only be performed by qualified individuals. Ensure all local and national electrical codes are followed during installation.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Intermatic EI210W timer is a versatile wall switch designed for simple, push-button operation. Key features include:
- ലളിതമായ പ്രവർത്തനം: Easily select countdown times of 10, 20, 30, or 60 minutes with a single button press. No complex programming is required.
- Silent Control: Operates without noise, suitable for CFLs, LED lamps, and fans.
- ബഹുമുഖ പ്രയോഗങ്ങൾ: Ideal for various uses including indoor and outdoor lighting, bathroom fans, and ventilation fans.
- എളുപ്പമുള്ള ഇൻസ്റ്റാളേഷൻ: Designed to replace single-pole switches, requiring only a neutral wire.
- വൈറ്റ് ഫിനിഷ്: Aesthetically designed to blend with most decor.
ഇൻസ്റ്റലേഷൻ
This section provides step-by-step instructions for installing the Intermatic EI210W timer. Ensure power is off at the circuit breaker before beginning.
- വയറിംഗ് തയ്യാറാക്കുക: Remove the existing wall plate and disconnect the light switch. Verify that both "hot" and "neutral" wires are present in the junction box. If either is missing, additional wiring may be required.
- Connect Load Wire: Connect the red timer wire to the fixture's load wire using a wire connector.
- Connect Hot Wire: Connect the black timer wire to the "hot" (usually black or red) wire from the power source in the junction box using a wire connector.
- ന്യൂട്രൽ വയർ ബന്ധിപ്പിക്കുക: Cut the white wire in the junction box (or open splice) and strip 3/8" of insulation from both ends. Connect the white timer wire to the white neutral wires in the junction box using a wire connector.
- ഗ്രൗണ്ട് വയർ ബന്ധിപ്പിക്കുക: If the original wall switch had separate grounding conductors connected to a green screw, connect these to the green wire from the timer using a wire connector.
- സുരക്ഷിത കണക്ഷനുകൾ: എല്ലാ വയർ കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
- Mount Timer: Carefully place all wires inside the junction box. Fit the timer into the junction box and secure it using the two mounting screws provided.
- പവർ പുന ore സ്ഥാപിക്കുക: Reconnect electrical power at the circuit breaker.
ഓപ്പറേഷൻ
The EI210W timer offers two primary modes of operation: Timer Mode and Hold Mode.
ടൈമർ മോഡ്
To activate Timer Mode, press and release the push button (for less than 2 seconds) repeatedly. Each press cycles through the available time settings: 10 minutes, 20 minutes, 30 minutes, 60 minutes, and OFF. The illuminated LED next to the selected time indicates the current setting, and the connected load will turn ON. The timer will count down, and once the set time expires, all 5 LEDs will turn off, and the connected load will switch OFF.
ഹോൾഡ് മോഡ് (തുടർച്ചയുള്ള പ്രവർത്തനം)
To enable continuous operation, press and hold the push button for more than 2 seconds. The timer will enter HOLD mode, indicated by the HOLD LED illuminating. In this mode, the connected load remains ON indefinitely. To exit HOLD mode, press and release the push button. All 5 LEDs will turn off, and the connected load will switch OFF.
മെയിൻ്റനൻസ്
The Intermatic EI210W Electronic Countdown Timer is designed for maintenance-free operation. No routine maintenance or lubrication is required. For cleaning, gently wipe the surface with a soft, damp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
ട്രബിൾഷൂട്ടിംഗ്
No specific troubleshooting steps are provided in the product documentation. If the device is not functioning as expected after proper installation, ensure:
- Power is supplied to the circuit at the breaker.
- All wire connections are secure and correctly matched according to the installation instructions.
- The load connected to the timer is within its specified electrical ratings.
If issues persist, it is recommended to consult a qualified electrician or contact Intermatic customer support.
സ്പെസിഫിക്കേഷനുകൾ
| ബ്രാൻഡ് | ഇൻ്റർമാറ്റിക് |
| മോഡൽ നമ്പർ | EI210W |
| വാല്യംtage | 120 വോൾട്ട് |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| ഉൽപ്പന്ന അളവുകൾ | 5"D x 5"W x 5"H |
| ഇനത്തിൻ്റെ ഭാരം | 4.5 ഔൺസ് |
| ക്രമീകരണങ്ങളുടെ എണ്ണം | 5 (10, 20, 30, 60 minutes, Hold) |
| Type of Bulb Supported | എൽ.ഇ.ഡി., സി.എഫ്.എൽ |
| മൗണ്ടിംഗ് തരം | മതിൽ മൗണ്ട് |
| സ്റ്റൈൽ സ്വിച്ചുചെയ്യുക | Toggle Switch (Push Button) |
| സർട്ടിഫിക്കേഷൻ | UL |
| യു.പി.സി | 078275095236 |
വാറൻ്റിയും പിന്തുണയും
This Intermatic product is covered by a Limited 1 Year Warranty from the date of purchase. This warranty covers defects in materials or workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repair, or improper installation.
For warranty service or technical support, please contact Intermatic Incorporated. Keep your purchase receipt for warranty claims.
നിർമ്മാതാവ്: ഇന്റർമാറ്റിക് ഇൻകോർപ്പറേറ്റഡ്
വിലാസം: സ്പ്രിംഗ് ഗ്രോവ്, ഇല്ലിനോയിസ് 60081-9698
