1. ആമുഖം
This manual provides essential information for the proper installation, operation, and maintenance of the System Sensor 5604 Fixed Temperature Single Circuit Heat Sensor. Please read this manual thoroughly before installation and retain it for future reference. This device is designed to detect heat and activate an alarm in fire protection systems.
2 സുരക്ഷാ വിവരങ്ങൾ
പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ:
- Installation must comply with all local and national electrical and fire codes.
- Disconnect power before installing or servicing the device.
- This device operates on a corded electric power source; ensure proper wiring connections.
- Do not paint the heat sensor. Painting can interfere with its ability to detect heat effectively.
- Consult a qualified electrician or fire alarm technician for installation and maintenance.
- This heat sensor is not a substitute for smoke detectors. For comprehensive fire protection, both heat and smoke detectors are recommended.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The System Sensor 5604 is a fixed-temperature heat sensor designed to activate when the ambient temperature reaches 194°F (90°C). It is a single-circuit device, suitable for integration into compatible fire alarm control panels. The sensor provides an audible alarm upon activation.
ചിത്രം 3.1: മുകളിൽ view of the System Sensor 5604 heat sensor, showing the central detection element and the 194°F/90°C temperature rating printed on the rim.
ചിത്രം 3.2: സൈഡ് പ്രോfile of the System Sensor 5604 heat sensor, illustrating its compact design and the 'DO NOT PAINT' warning.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for the reliable operation of the heat sensor. Refer to the wiring diagram and mounting instructions below.
4.1 മൗണ്ടിംഗ്
- Select a suitable mounting location in compliance with local fire codes, typically on a ceiling or high on a wall.
- Use the provided mounting holes on the back of the sensor for surface mounting. The sensor requires No. 6 flat head screws.
- Securely fasten the sensor to the mounting surface.
4.2 വയറിംഗ്
The 5604 heat sensor is designed for a single-circuit, corded electric connection. Ensure all wiring is performed by a qualified individual and adheres to applicable electrical codes.
- Connect the power supply wires to the designated terminals on the back of the sensor.
- ഇടയ്ക്കിടെയുള്ള പ്രവർത്തനം തടയുന്നതിന് എല്ലാ കണക്ഷനുകളും ഇറുകിയതും സുരക്ഷിതവുമാണെന്ന് ഉറപ്പാക്കുക.
- Verify correct polarity if applicable to your fire alarm control panel.
ചിത്രം 4.1: പിന്നിലേക്ക് view of the System Sensor 5604 heat sensor, highlighting the mounting holes for surface installation and the electrical wiring terminals.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The System Sensor 5604 is a fixed-temperature heat sensor that operates automatically. Once properly installed and powered, it continuously monitors the ambient temperature.
- സാധാരണ പ്രവർത്തനം: The sensor remains in a standby state, monitoring the temperature.
- അലാറം സജീവമാക്കൽ: If the ambient temperature at the sensor location reaches or exceeds 194°F (90°C), the sensor will activate, triggering an audible alarm and signaling the connected fire alarm control panel.
- അലാറം സൂചന: The sensor provides an audible alarm to alert occupants.
- പുന et സജ്ജമാക്കുക: Fixed temperature heat sensors typically do not reset after activation. Once the temperature threshold is met and the sensor activates, it must be replaced.
6. പരിപാലനം
Regular maintenance ensures the continued reliability of your heat sensor.
- വൃത്തിയാക്കൽ: Periodically clean the exterior of the sensor with a soft, dry cloth to remove dust and debris. Do not use cleaning agents or solvents.
- പരിശോധന: Visually inspect the sensor regularly for any signs of damage or obstruction.
- പെയിൻ്റിംഗ്: പെയിന്റ് ചെയ്യരുത് the heat sensor. Paint can insulate the thermal element, preventing it from responding accurately to temperature changes.
- പരിശോധന: Consult local fire codes for recommended testing intervals. Testing of fixed temperature heat sensors typically involves professional inspection rather than user-initiated tests.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your System Sensor 5604 heat sensor, refer to the following:
- അലാറം ശബ്ദങ്ങൾ: If the alarm sounds, it indicates that the temperature at the sensor location has reached 194°F (90°C). Follow your established fire safety plan, which typically involves evacuating the premises and contacting the fire department.
- No Alarm During High Heat: If you suspect a fire or high heat condition but the sensor does not activate, ensure the device is properly powered and wired. If the issue persists, contact a qualified fire alarm technician for inspection.
- വൈദ്യുതി പ്രശ്നങ്ങൾ: This device is corded electric and does not require a battery backup. Ensure continuous power supply from your fire alarm control panel.
- ശാരീരിക ക്ഷതം: If the sensor is physically damaged, it must be replaced immediately.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് | സിസ്റ്റം സെൻസർ |
| മോഡൽ നമ്പർ | 5604 |
| സജീവമാക്കൽ താപനില | 194°F (90°C) Fixed Temperature |
| സർക്യൂട്ട് തരം | സിംഗിൾ സർക്യൂട്ട് |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| അലാറം തരം | കേൾക്കാവുന്ന |
| നിറം | വെള്ള |
| ഇനത്തിൻ്റെ ഭാരം | 3.2 ഔൺസ് |
| ഉൽപ്പന്ന അളവുകൾ | 4.8 x 4.8 x 1.8 ഇഞ്ച് |
| യു.പി.സി | 783863022470 |
| ബാറ്ററികൾ ആവശ്യമാണ് | ഇല്ല |
9. വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support regarding your System Sensor 5604 heat sensor, please contact System Sensor directly or refer to the documentation provided at the point of purchase. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official System Sensor webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.
