ഉൽപ്പന്നം കഴിഞ്ഞുview
The Behringer DR600 DIGITAL REVERB is a digital stereo reverb effects pedal designed for guitarists and other musicians seeking studio-quality reverb effects in a compact stompbox format. It offers a versatile range of reverb types and intuitive controls for sound shaping.
This pedal features 24-bit high-resolution stereo reverbs, including Spring, Plate, Hall, Gate, Room, and Modulate. It is equipped with dedicated Mode, Time, Tone, and Level controls for comprehensive sound adjustment. The DR600 can be powered by a 9V battery or an optional BEHRINGER PSU-SB DC power supply.
A blue status LED indicates effect on/off status and battery check. The pedal incorporates a first-class electronic On/Off switch to ensure high signal integrity in bypass mode. Its robust construction is designed for long-term durability.
സജ്ജീകരണവും കണക്ഷനുകളും
Before connecting the DR600, ensure all audio equipment is turned off to prevent damage from sudden signal spikes.
വൈദ്യുതി വിതരണം
- ബാറ്ററി പവർ: The DR600 requires one 9V battery (not included). To install, open the battery compartment on the underside of the pedal. The blue status LED will indicate battery status.
- എ സി അഡാപ്റ്റർ: For extended use, the pedal can be powered by an optional BEHRINGER PSU-SB DC power supply (not included). Connect the power supply to the 9V DC input jack.
ഓഡിയോ കണക്ഷനുകൾ
The DR600 features stereo inputs and outputs for versatile connectivity.
- Input A (IN A): Connect your instrument (e.g., guitar) or the output of a preceding effects pedal to this input using a 1/4-inch TS cable.
- Input B (IN B): For stereo input, connect the second channel of your stereo signal source to this input.
- Output A (OUT A): ഈ ഔട്ട്പുട്ട് നിങ്ങളിലേക്ക് ബന്ധിപ്പിക്കുക ampലിഫയറിന്റെ ഇൻപുട്ട് അല്ലെങ്കിൽ നിങ്ങളുടെ സിഗ്നൽ ശൃംഖലയിലെ അടുത്ത പെഡലിന്റെ ഇൻപുട്ട്.
- Output B (OUT B): For stereo output, connect this output to the second input of a stereo amplifier setup or mixer.
ചിത്രം 1: മുകളിൽ നിന്ന് താഴേക്ക് view of the DR600 pedal, highlighting the control knobs and input/output jacks.
Operating the DR600
The DR600 is designed for ease of use with intuitive controls.
നിയന്ത്രണങ്ങൾ
- ലെവൽ നോബ്: Controls the overall output level of the reverb effect. Turn clockwise to increase the effect volume.
- ടോൺ നോബ്: Adjusts the tonal character of the reverb. From "LO" (low) to "HI" (high), this knob shapes the brightness or darkness of the reverb tail.
- TIME നോബ്: Determines the decay time or length of the reverb. Turn clockwise for longer, more expansive reverb tails.
- മോഡ് നോബ്: Selects one of the six available reverb types:
- സ്പ്രിംഗ്: Emulates the classic sound of a spring reverb tank, often found in vintagഇ ഗിത്താർ ampജീവപര്യന്തം.
- പാത്രം: Simulates the smooth, dense decay of a plate reverb, commonly used in studio recordings.
- ഹാൾ: Recreates the expansive and natural reverberation of a large concert hall.
- ഗേറ്റ്: Produces a reverb tail that is abruptly cut off, creating a dramatic and percussive effect.
- മുറി: Simulates the acoustics of a smaller, more intimate room, providing a natural and subtle ambiance.
- മോഡുലേറ്റ്: Adds modulation (e.g., chorus or flanger-like movement) to the reverb tail, creating a swirling, ethereal effect.
- ON/BATT LED: This blue LED illuminates when the effect is active. It also serves as a battery check indicator; if the LED dims or does not light up, the battery may need replacement.
- കാൽ സ്വിച്ച്: Engages or bypasses the reverb effect. Press the footswitch to toggle between effect on and bypass modes. The electronic switch ensures signal integrity when bypassed.
ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the DR600 pedal, illustrating its compact design and side jacks.
മെയിൻ്റനൻസ്
Proper maintenance ensures the longevity and optimal performance of your DR600 pedal.
ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ
When the ON/BATT LED dims or the effect performance degrades, it's time to replace the 9V battery. Turn off all connected equipment, open the battery compartment, remove the old battery, and insert a new one, observing polarity. Close the compartment securely.
വൃത്തിയാക്കൽ
Clean the pedal's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components. Ensure no liquids enter the pedal's housing.
സംഭരണം
If storing the pedal for an extended period, remove the battery to prevent leakage and potential damage. Store in a cool, dry place away from direct sunlight and extreme temperatures.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your DR600, refer to the following common troubleshooting steps:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ശബ്ദമില്ല അല്ലെങ്കിൽ ദുർബലമായ ശബ്ദം. |
|
|
| Effect not engaging (LED off). |
|
|
| Distorted or undesirable sound. |
|
|
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ: | DR600 |
| ഇഫക്റ്റ് തരം: | Digital Stereo Reverb |
| റിവേർബ് തരങ്ങൾ: | Spring, Plate, Hall, Gate, Room, Modulate |
| ഡിജിറ്റൽ പരിവർത്തനം: | 24-bit high-resolution |
| നിയന്ത്രണങ്ങൾ: | Level, Tone, Time, Mode |
| ഇൻപുട്ടുകൾ: | IN A, IN B (1/4-inch TS) |
| ഔട്ട്പുട്ടുകൾ: | OUT A, OUT B (1/4-inch TS) |
| വൈദ്യുതി വിതരണം: | 9V Battery or BEHRINGER PSU-SB DC power supply (not included) |
| ഇനത്തിൻ്റെ ഭാരം: | 11.7 ഔൺസ് (0.73 പൗണ്ട്) |
| ഉൽപ്പന്ന അളവുകൾ: | 2.76 x 2.13 x 4.84 ഇഞ്ച് (2.76"L x 2.13"W x 4.84"H) |
| മെറ്റീരിയൽ തരം: | ലോഹം |
| നിറം: | വെള്ളി |
വാറൻ്റിയും പിന്തുണയും
The Behringer DR600 is designed and engineered in Germany, featuring high-quality components and exceptionally rugged construction to ensure a long operational life. For detailed warranty information and technical support, please refer to the official Behringer webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.
It is recommended to register your product online to receive the latest warranty terms and product updates.
കൂടുതൽ സഹായത്തിന്, സന്ദർശിക്കുക ആമസോണിലെ ബെഹ്രിംഗർ സ്റ്റോർ അല്ലെങ്കിൽ അവരുടെ ഔദ്യോഗിക പിന്തുണാ ചാനലുകൾ.
