Eiko DT50/35/RS

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb User Manual

Model: DT50/35/RS

1. ആമുഖം

This manual provides essential information for the safe and effective use of your Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. Please read these instructions carefully before installation and retain for future reference.

The Eiko DT50/35/RS is a 50-watt compact fluorescent (CFL) bulb, also referred to as a compact fluorescent halogen bulb, featuring a Duo-Tube design and a 2G11 base. It produces a 3500K cool white light with 4300 lumens brightness, suitable for various lighting applications.

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb

Figure 1: Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. This image shows the elongated, dual-tube design of the bulb with its 2G11 base at the bottom.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

WARNING: To prevent electric shock or burns, always turn off the power supply before installing or replacing the bulb.

  • ബൾബിന്റെ ശക്തിക്ക് അനുസൃതമായി ഫിക്സ്ചർ റേറ്റുചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.tagഇ (50W).
  • Do not use with dimmers unless explicitly stated as compatible.
  • Handle the bulb by its base to avoid touching the glass, as oils from skin can reduce bulb life.
  • If the bulb breaks, ventilate the room and carefully clean up the broken glass and mercury according to local regulations.
  • കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

  1. പവർ ഓഫ് ചെയ്യുക: Locate the light fixture's power switch and turn it off. For added safety, turn off the circuit breaker controlling the fixture.
  2. പഴയ ബൾബ് നീക്കം ചെയ്യുക (ബാധകമെങ്കിൽ): If replacing an existing bulb, allow it to cool completely before carefully removing it from the fixture.
  3. Identify Base Type: Confirm your fixture uses a 2G11 base. The Eiko DT50/35/RS bulb has a 2G11 4-pin base.
  4. 2G11 Base Diagram

    Figure 2: Diagram of a 2G11 base. This illustration shows the four-pin configuration of the 2G11 lamp base, indicating its shape and pin arrangement for proper insertion.

  5. പുതിയ ബൾബ് സ്ഥാപിക്കുക: Align the four pins of the Eiko DT50/35/RS bulb with the corresponding slots in the fixture's 2G11 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
  6. പവർ പുന ore സ്ഥാപിക്കുക: Once the bulb is securely installed, turn the circuit breaker back on, then turn on the light switch.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Eiko DT50/35/RS bulb operates like a standard fluorescent lamp. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

  • പ്രാരംഭ സന്നാഹം: Fluorescent bulbs may take a few moments to reach full brightness, especially in colder environments.
  • ഓൺ/ഓഫ് ചെയ്യുന്നത്: Frequent switching on and off can reduce the lifespan of fluorescent bulbs. It is recommended to leave the light on for longer periods when possible.

5. പരിപാലനം

  • വൃത്തിയാക്കൽ: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
  • മാറ്റിസ്ഥാപിക്കൽ: Replace the bulb when it reaches the end of its life (flickering, dimming, or failure to light). Always turn off the power before replacing.
  • നീക്കം ചെയ്യൽ: This compact fluorescent bulb contains a small amount of mercury. Dispose of it according to local, state, and federal regulations. Many retailers and municipalities offer recycling programs for CFLs. Do not dispose of in regular household trash.

6. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ബൾബ് പ്രകാശിക്കുന്നില്ല.ഘടിപ്പിക്കാൻ ശക്തിയില്ല.
ബൾബ് ശരിയായി സ്ഥാപിച്ചിട്ടില്ല.
ബൾബ് തകരാറിലാണ് അല്ലെങ്കിൽ അതിന്റെ അവസാനത്തിലാണ്.
Fixture ballast is faulty.
പവർ സ്വിച്ചും സർക്യൂട്ട് ബ്രേക്കറും പരിശോധിക്കുക.
പവർ ഓഫ് ചെയ്യുക, ബൾബ് വീണ്ടും ഉറപ്പിച്ച് വയ്ക്കുക.
ബൾബ് മാറ്റുക.
യോഗ്യതയുള്ള ഒരു ഇലക്ട്രീഷ്യനെ സമീപിക്കുക.
ബൾബ് മിന്നുന്നു.ബൾബ് ജീവിതാവസാനത്തോട് അടുക്കുന്നു.
അനുയോജ്യമല്ലാത്ത ഡിമ്മർ.
അയഞ്ഞ കണക്ഷൻ.
Cold environment.
ബൾബ് മാറ്റുക.
Remove dimmer or replace with compatible bulb/fixture.
Turn off power, check bulb seating.
Allow time for warm-up.
ബൾബ് മങ്ങിയതാണ്.ബൾബ് ജീവിതാവസാനത്തോട് അടുക്കുന്നു.
തെറ്റായ വാട്ട്tagഫിക്സ്ചറിനായി e.
ബൾബ് മാറ്റുക.
Ensure fixture and bulb wattagഇ പൊരുത്തം.

7 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ബ്രാൻഡ്ഐക്കോ
മോഡൽ നമ്പർDT50/35/RS
ലൈറ്റ് തരംCompact Fluorescent Halogen (CFL)
വാട്ട്tage50 വാട്ട്സ്
അടിസ്ഥാന തരം2G11 (4-പിൻ)
വർണ്ണ താപനില3500 കെൽവിൻ (കൂൾ വൈറ്റ്)
തെളിച്ചം4300 ല്യൂമെൻസ്
ആകൃതിT4 (Duo-Tube)
അളവുകൾഏകദേശം 1 x 1 x 2.7 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം3.2 ഔൺസ്
മെറ്റീരിയൽടങ്സ്റ്റൺ

8. വാറൻ്റിയും പിന്തുണയും

Specific warranty information for Eiko products may vary. Please refer to the original product packaging or the official Eiko website for the most current warranty details.

For technical support or further inquiries, please contact Eiko customer service through their official channels. Contact information can typically be found on the manufacturer's webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ്.

നിർമ്മാതാവ്: ഐക്കോ

ഭാഗം നമ്പർ: DT50/35/RS

UPC: 031293493040

അനുബന്ധ രേഖകൾ - DT50/35/RS

പ്രീview EIKO LED T8 Linear Tube Installation Instructions
Comprehensive installation instructions for EIKO LED T8 Type B Linear Tube lights, covering safety precautions, maintenance, and detailed wiring diagrams for retrofitting fluorescent luminaires.
പ്രീview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
പ്രീview EIKO VL1 Series LED Volumetric Troffer Installation Instructions
Comprehensive installation guide for the EIKO VL1 Series LED Volumetric Troffer, covering overview, safety precautions, installation steps, wiring schematics, and sensor installation. Includes power and CCT selection.
പ്രീview ഫോട്ടോസെൽ ഇൻസ്റ്റലേഷൻ ഗൈഡുള്ള EIKO Z10 മൈക്രോവേവ് ബൈ-ലെവൽ ഡിമ്മിംഗ് സെൻസർ
ഫോട്ടോസെല്ലോടുകൂടിയ EIKO Z10 മൈക്രോവേവ് ബൈ-ലെവൽ ഡിമ്മിംഗ് സെൻസറിനായുള്ള സമഗ്രമായ ഇൻസ്റ്റാളേഷൻ ഗൈഡ്, വിശദമായ സ്പെസിഫിക്കേഷനുകൾ, സെൻസർ കവറേജ്, ശരിയായ സജ്ജീകരണത്തിനും പ്രവർത്തനത്തിനുമുള്ള FCC കംപ്ലയൻസ് വിവരങ്ങൾ.
പ്രീview EIKO CSX1 Series LED Commercial Strip Premium Installation Instructions
Comprehensive installation guide for the EIKO CSX1 Series LED Commercial Strip Premium fixtures, covering surface mount, chain mount, and optional accessory installations.
പ്രീview EIKO LED സർഫേസ് മേലാപ്പ് സ്ക്വയർ ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
EIKO LED സർഫേസ് കനോപ്പി സ്ക്വയർ ഫിക്‌ചറിനായുള്ള വിശദമായ ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ ഈ ഡോക്യുമെന്റ് നൽകുന്നു, സുരക്ഷാ മുൻകരുതലുകൾ, ഉപരിതല മൗണ്ടിംഗ്, സൈഡ് വയറിംഗ്, പെൻഡന്റ് മൗണ്ടിംഗ്, പവർ അഡ്ജസ്റ്റ്മെന്റ്, Z10 സെൻസർ ഇൻസ്റ്റാളേഷൻ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.