ആമുഖം
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator. Please read this manual thoroughly before using the product.
The Fenwick 20 is a pneumatic 20 oz sausage dispenser designed for consistent application. It features a lightweight design, an adjustable regulator, and a plunger system that provides consistent pressure on the material. Key components are manufactured in the U.K. and assembled in Michigan.
Image: The COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator, showing its main body, handle, and air inlet.
ഉൽപ്പന്ന സവിശേഷതകൾ
- True adjustable air regulator: 125 PSI Maximum; 145 PSI Maximum Input.
- Floating plunger action with secure cord; Plunger Extension for reduced waste.
- Drawn aluminum barrel construction.
- Instant dump valve for quick pressure release.
- Series 3 Air System for efficient operation.
- Integrated silencer for reduced noise during operation.
- Quick release end cap for easy material loading and unloading.
- Rotating air hose connector for flexible movement.
- Includes six white cone nozzles for various application needs.
സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the applicator and all accessories from the packaging. Verify all components listed in the "Included Components" section are present.
- എയർ സപ്ലൈ കണക്ഷൻ: Connect a compressed air hose (not included) to the rotating air hose connector at the base of the handle. Ensure the connection is secure and leak-free. The maximum input pressure is 145 PSI.
- Regulator Adjustment: The applicator features an adjustable air regulator. Before use, adjust the regulator to the desired operating pressure, typically between 0-125 PSI, depending on the material viscosity and desired flow rate.
- ലോഡ് ചെയ്യുന്ന മെറ്റീരിയൽ:
- Unscrew the quick release end cap from the rear of the aluminum barrel.
- Insert the 20 oz (600 ml) sausage material into the barrel.
- Ensure the plunger system is retracted to allow for full insertion of the sausage.
- Replace and securely tighten the quick release end cap.
- നോസൽ അറ്റാച്ച്മെൻ്റ്: Select an appropriate white cone nozzle for your application and securely attach it to the front of the applicator barrel. Trim the nozzle tip to the desired bead size.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
- സുരക്ഷ ആദ്യം: Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the applicator. Ensure adequate ventilation in your workspace.
- Initiating Flow: Point the nozzle at a scrap surface. Gently press the trigger to begin material flow. Adjust the air regulator as needed to achieve a consistent and smooth bead.
- അപേക്ഷ: Apply the material by moving the applicator smoothly along the desired path. Maintain consistent pressure on the trigger for an even bead.
- ഒഴുക്ക് നിർത്തൽ: Release the trigger to stop material flow. The instant dump valve will release pressure, preventing material from continuing to dispense.
- Material Change/Removal: To change or remove material, ensure the air supply is disconnected. Unscrew the quick release end cap and carefully remove the sausage.
മെയിൻ്റനൻസ്
Regular maintenance ensures the longevity and optimal performance of your COX pneumatic applicator.
- വൃത്തിയാക്കൽ: After each use, especially when using fast-curing materials, clean any residual material from the nozzle and the inside of the barrel. Use appropriate solvents recommended by the material manufacturer.
- Plunger System: Periodically inspect the plunger and its cord for wear or damage. Ensure the plunger moves freely within the barrel.
- എയർ കണക്ഷനുകൾ: Check all air connections and hoses regularly for leaks or damage. Replace worn seals or fittings as necessary.
- ലൂബ്രിക്കേഷൻ: Apply a small amount of pneumatic tool oil to the air inlet periodically to lubricate internal components and prevent corrosion.
- സംഭരണം: Store the applicator in a clean, dry place away from extreme temperatures and direct sunlight. Disconnect from air supply before storage.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No material flow or inconsistent flow |
|
|
| കണക്ഷനുകളിൽ നിന്ന് വായു ചോർച്ച |
|
|
| Material continues to flow after trigger release |
|
|
സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 63006-600 Fenwick 600 ml. |
| OEM ഭാഗം നമ്പർ | Fenwick 20 |
| ബ്രാൻഡ് | COX |
| ശേഷി | 20 Ounce (600 ml) Sausage |
| പരമാവധി ഇൻപുട്ട് മർദ്ദം | 145 പി.എസ്.ഐ |
| പരമാവധി പ്രവർത്തന സമ്മർദ്ദം | 125 പി.എസ്.ഐ |
| അളവുകൾ (L x W x H) | 22 x 10 x 3 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 2.79 പൗണ്ട് (1.27 കിലോഗ്രാം) |
| യു.പി.സി | 717647610072 |
| നിർമ്മാണ തരം | Multi-part, Drawn aluminum barrel |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Product & Instructions Guide, Six white cone nozzles |
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support regarding your COX 63006-600 Fenwick 600 ml Sausage Pneumatic Applicator, please contact COX North America directly.
COX is committed to quality and durability. All products are manufactured in-house at facilities in Haslett, Michigan, and Newbury, England, adhering to rigid quality management processes.
For further assistance, visit the official COX webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ ഡോക്യുമെന്റേഷനോടൊപ്പം നൽകിയിരിക്കുന്ന കോൺടാക്റ്റ് വിവരങ്ങൾ റഫർ ചെയ്യുക.
