ആമുഖം
The Eden Modular Above-Ground Rotor Sprinkler System offers flexibility, coverage, and convenience for your watering needs. This system is designed for easy installation without the need for specialized tools, allowing you to customize your garden or landscape watering layout.
Each rotor provides a 30 ft spray radius at 50 PSI, with an adjustable arc from 5° to 360°, ensuring thorough coverage. The modular design supports connecting up to three sets per water circuit, enabling the system to expand with your garden's requirements. Included height extension tubes help lift the spray above taller plants, while rubber-free aiming allows you to direct the water precisely without repositioning the base.
പാക്കേജ് ഉള്ളടക്കം
Your Eden 96093 Sprinkler System package includes the following components:
- Sprinkler heads with ground spikes (3 units)
- 5-inch riser extension tubes (3 units)
- Hose starter connection
- Hose extender/repair piece
- T-bracket connector
- 50 feet of green hose
- Bonus hose repair connector
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
The Eden Sprinkler System is designed for easy, tool-free setup. Follow these steps for optimal performance:
- ഹോസ് തയ്യാറാക്കുക: Cut the green hose to your desired lengths using a PEX cutter or sharp scissors for a clean, straight cut. This ensures a secure, leak-free connection.
- കണക്ടറുകൾ അറ്റാച്ചുചെയ്യുക:
- For the main water source, attach the hose starter connection to one end of a hose segment. This is where your garden hose will screw into the system.
- If needed, use the hose extender/repair piece to lengthen hoses or repair damaged sections.
- Utilize the T-bracket connector to split a water circuit into two separate directions, allowing for broader coverage or different watering zones.
- Connect Sprinkler Heads:
- Slide the cap onto the cut end of a hose segment.
- Insert the hose end into the port on the side of the sprinkler head.
- Screw the cap onto the sprinkler head, compressing the hose to create a secure, watertight seal.
- Repeat this process for all sprinkler heads you intend to use.
- Position Sprinklers: Insert the ground spikes of the sprinkler heads firmly into the soil in your desired watering areas. You can use the 5-inch riser extension tubes to elevate the sprinkler heads, allowing them to spray over taller plants and shrubs.
ഓപ്പറേഷൻ
Once installed, operating your Eden Sprinkler System is straightforward:
- വെള്ളം ഓണാക്കുക: Connect your main garden hose to the system's starter connection and turn on the water supply.
- Adjust Spray: Each sprinkler head features three key adjustments:
- ഓൺ/ഓഫ് സ്വിച്ച്: A red lever allows you to individually turn each sprinkler head on or off.
- റൊട്ടേറ്റർ: Below the sprinkler head, a rotator allows you to point the sprinkler in the desired direction.
- Spray Adjuster: On top of the sprinkler head, the spray adjuster allows you to set the spray arc from 5° to a full 360°. This enables precise watering for specific areas, whether it's a narrow strip or a full circle.
- കവറേജ് ഒപ്റ്റിമൈസ് ചെയ്യുക: Adjust each sprinkler head to cover your specific lawn or garden areas. The system is highly adaptable for both small and awkward spaces, as well as larger areas up to 3,200 sq. ft. with multiple units.
മെയിൻ്റനൻസ്
Proper maintenance will ensure the longevity and optimal performance of your Eden Sprinkler System:
- വൃത്തിയാക്കൽ: When not in use, rinse the sprinkler components to remove dirt and debris.
- സംഭരണം: Drain the system and store all components indoors, away from freezing temperatures, to prevent damage.
- ഹോസ് കെയർ: The included hose repair connector can be used to fix any accidental cuts or damage to your watering hoses, ensuring long-term usability.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Low water pressure/short spray distance | Insufficient water supply, kinked hose, too many sprinklers on one circuit. | Ensure adequate water pressure from the source. Check hoses for kinks. Reduce the number of sprinklers on a single water circuit or increase water supply. |
| ചോർച്ച കണക്ഷനുകൾ | Hose not properly inserted, cap not tightened sufficiently, damaged hose end. | Ensure hose is fully inserted into the sprinkler port. Tighten the cap securely. Use the included hose repair connector if the hose end is damaged. |
| Sprinkler not rotating or spraying correctly | Debris in the nozzle, spray adjuster set incorrectly. | Check the nozzle for any blockages and clear them. Adjust the spray adjuster to the desired arc (5° to 360°). |
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: ഏദൻ
- മോഡൽ നമ്പർ: 96093EDAMZ
- നിറം: കറുപ്പ്, ചുവപ്പ്
- മെറ്റീരിയൽ: Metal, Plastic (ABS plastic for durability)
- ശൈലി: Raised (with optional extension tubes)
- ഇനത്തിന്റെ അളവുകൾ (L x W x H): 9.84 x 3.14 x 3.54 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 10.8 ഔൺസ്
- പരമാവധി മർദ്ദം: 50 PSI (ഒരു ചതുരശ്ര ഇഞ്ചിന് പൗണ്ട്)
- പരമാവധി ഫ്ലോ റേറ്റ്: മിനിറ്റിന് 4.8 ഗാലൻ
- ഇൻലെറ്റ് കണക്ഷൻ വലുപ്പം: 0.5 ഇഞ്ച്
- Coverage per Rotor: Up to 30 ft spray radius
- ക്രമീകരിക്കാവുന്ന ആർക്ക്: 5° മുതൽ 360° വരെ
- Total Coverage (3 rotors): 3,200 ചതുരശ്ര അടി വരെ.
- വിപുലീകരണക്ഷമത: Up to 3 connected sets per water circuit
വാറൻ്റിയും പിന്തുണയും
The Eden 96093 Multi-Adjustable Flex Design Garden Sprinkler System comes with a 2 വർഷത്തെ പരിമിത വാറൻ്റി.
For warranty claims, technical support, or further inquiries, please refer to the official Eden webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
പ്രധാന കുറിപ്പ്: Intended for outdoor use with cold water only. When not in use, rinse the tool to remove most of dirt, drain and store indoors away from freezing temperatures.
An Eden Garden Hose Model 94051EDAMZ is required for optimal use (Not Included).
