Dorman 930-100

Dorman 930-100 Front Wheel Hub Assembly Instruction Manual

For Select Saab / Saturn Models

1. ആമുഖം

1.1 ഉൽപ്പന്നം കഴിഞ്ഞുview

The Dorman 930-100 Front Wheel Hub Assembly is engineered as a direct replacement for the original equipment hub in compatible vehicles. This component is crucial for the proper rotation of your vehicle's wheel and supports the vehicle's weight, ensuring smooth and safe operation. It has undergone rigorous testing to ensure a precise fit and reliable performance over an extended service life.

1.2 പ്രധാന സവിശേഷതകൾ

1.3 വാഹന അനുയോജ്യത

This wheel hub is compatible with the following vehicle models. Always verify fitment using a vehicle compatibility tool before purchase and installation.

2 സുരക്ഷാ വിവരങ്ങൾ

Working on vehicle components can be hazardous. Always prioritize safety to prevent injury or damage to the vehicle. If you are not confident in your ability to perform this installation, it is highly recommended to seek assistance from a qualified automotive technician.

3. പാക്കേജ് ഉള്ളടക്കം

Upon opening the package, please ensure all components are present and undamaged.

Dorman 930-100 Front Wheel Hub Assembly

Image 1: The Dorman 930-100 Front Wheel Hub Assembly. This image shows the complete hub assembly with its mounting flange and central splined bore.

4. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

The following is a general guide for replacing a wheel hub assembly. Specific steps and torque values may vary by vehicle model. Always consult your vehicle's factory service manual for precise instructions.

4.1 Tools Required (General)

4.2 തയ്യാറാക്കൽ

  1. വാഹനം നിരപ്പായ ഒരു പ്രതലത്തിൽ പാർക്ക് ചെയ്ത് പാർക്കിംഗ് ബ്രേക്ക് അമർത്തുക.
  2. Loosen the lug nuts on the wheel where the hub will be replaced, but do not remove them completely.
  3. Safely raise the vehicle using a jack and support it securely with jack stands.
  4. Remove the lug nuts and the wheel.

4.3 Removal of Old Hub Assembly

  1. Remove the brake caliper and rotor. Hang the caliper securely to avoid stressing the brake hose.
  2. If applicable, remove the axle nut dust cap and cotter pin, then loosen and remove the axle nut. This may require a large socket and breaker bar.
  3. Locate and remove the bolts securing the wheel hub assembly to the steering knuckle. These are typically on the backside of the knuckle.
  4. Carefully separate the old hub assembly from the steering knuckle. It may require gentle persuasion with a hammer or mallet. Be careful not to damage the axle shaft or other components.
  5. Clean the mounting surface on the steering knuckle thoroughly with a wire brush and brake cleaner.

4.4 Installation of New Hub Assembly

  1. Apply a thin layer of anti-seize lubricant to the mounting surface of the new hub assembly and the steering knuckle.
  2. Carefully align the new Dorman 930-100 wheel hub assembly with the steering knuckle and the axle shaft. Ensure the splines engage correctly.
  3. Insert and hand-tighten the hub mounting bolts from the backside of the steering knuckle.
  4. Tighten the hub mounting bolts to the vehicle manufacturer's specified torque using a torque wrench. Refer to your vehicle's service manual for exact specifications.
  5. Install the axle nut and tighten it to the manufacturer's specified torque. If a new cotter pin is required, install it and bend the ends to secure the nut.
  6. Reinstall the brake rotor and caliper. Tighten caliper bolts to manufacturer specifications.
  7. വീൽ വീണ്ടും ഇൻസ്റ്റാൾ ചെയ്ത് ലഗ് നട്ടുകൾ കൈകൊണ്ട് മുറുക്കുക.
  8. Lower the vehicle to the ground and fully tighten the lug nuts in a star pattern to the manufacturer's specified torque.
  9. Test drive the vehicle at low speeds to ensure proper function and listen for any unusual noises.

5. ഓപ്പറേഷൻ

Once installed, the Dorman 930-100 Front Wheel Hub Assembly functions as the critical interface between your vehicle's suspension and the wheel. It allows the wheel to rotate freely while supporting the vehicle's weight and transmitting power from the axle to the wheel (in driven wheels). A properly functioning wheel hub ensures smooth driving, accurate steering, and effective braking.

6. പരിപാലനം

While wheel hub assemblies are designed for long-term durability, regular inspection can help identify potential issues before they become severe.

7. പൊതുവായ പ്രശ്‌നങ്ങൾ പരിഹരിക്കുന്നു

If you experience any of the following symptoms, your wheel hub assembly may require inspection or replacement:

ലക്ഷണംസാധ്യമായ കാരണംആക്ഷൻ
Humming, grinding, or growling noise (increases with speed)Worn wheel bearingInspect and replace wheel hub assembly.
Loose steering or excessive wheel playWorn wheel bearing or loose hub boltsInspect for play, check torque of hub bolts, replace if necessary.
Vibration in the steering wheel or vehicleDamaged or worn wheel hub/bearingInspect for damage, replace wheel hub assembly.
ABS light illuminated (if equipped with ABS sensor)Damaged ABS sensor or tone ring on hubScan for ABS codes, inspect sensor and hub, replace if faulty.

8 സ്പെസിഫിക്കേഷനുകൾ

സ്പെസിഫിക്കേഷൻമൂല്യം
ബ്രാൻഡ്ഡോർമാൻ
മോഡൽ930-100
ഇനത്തിൻ്റെ ഭാരം4.2 പൗണ്ട്
ഉൽപ്പന്ന അളവുകൾ6 x 6.1 x 3.9 ഇഞ്ച്
നിർമ്മാതാവിൻ്റെ ഭാഗം നമ്പർ930-100
OEM ഭാഗം നമ്പർ90496444
Hollander Number538-1524
സ്ഥാനംFront, Rear (Note: This product is specifically for Front Wheel Hub applications as per title and description. 'Rear' may indicate a general part characteristic or compatibility with other models not listed. Always confirm for your specific vehicle.)
ബോൾട്ട് പാറ്റേൺ (ദ്വാരങ്ങളുടെ എണ്ണം)5

9. വാറൻ്റിയും പിന്തുണയും

Dorman Products is committed to providing quality automotive replacement parts. For over 100 years, Dorman has been a trusted name in the automotive aftermarket, engineering solutions that save time and money while increasing convenience and reliability.

For specific warranty information, technical support, or to explore other Dorman products, please visit the official Dorman webസൈറ്റ് സന്ദർശിക്കുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക. നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും Dorman Store on Amazon.

അനുബന്ധ രേഖകൾ - 930-100

പ്രീview ഡോർമാൻ ഓട്ടോമോട്ടീവ് ഹാർഡ്‌വെയർ കാറ്റലോഗ്: സമഗ്ര ഫാസ്റ്റനറുകളും ഘടകങ്ങളും
ഡോർമാൻ ഓട്ടോമോട്ടീവ് ഹാർഡ്‌വെയർ കാറ്റലോഗ് പര്യവേക്ഷണം ചെയ്യുക, അതിൽ ഫാസ്റ്റനറുകൾ, നട്ടുകൾ, ബോൾട്ടുകൾ, സ്പ്രിംഗുകൾ, ഓട്ടോമോട്ടീവ് അറ്റകുറ്റപ്പണികൾക്കും അറ്റകുറ്റപ്പണികൾക്കുമായി പ്രത്യേക ടെക് ട്രേകൾ എന്നിവയുടെ വിപുലമായ ശ്രേണി ഉൾപ്പെടുന്നു. കാര്യക്ഷമമായ ഇൻവെന്ററിക്കും സേവനത്തിനുമായി പാർട്ട് നമ്പറുകളും ആപ്ലിക്കേഷനുകളും കണ്ടെത്തുക.
പ്രീview Dorman 635-518 Engine Rear Main Seal Cover Removal and Installation Guide
Comprehensive removal and installation instructions for the Dorman 635-518 Engine Rear Main Seal Cover. This guide provides step-by-step procedures, technical tips, and compatibility information for General Motors, Isuzu, Saab, and Workhorse vehicles.
പ്രീview Dorman 600-910 Transfer Case Motor Installation Instructions
Important installation notes for the Dorman 600-910 Transfer Case Motor, covering critical steps for neutral position and shift shaft alignment. Includes English, Spanish, and French instructions.
പ്രീview ഡോർമാൻ 601-037 സ്റ്റിയറിംഗ് കോളം ലോക്ക് ആക്യുവേറ്റർ പ്രോഗ്രാമിംഗ്, വെരിഫിക്കേഷൻ ഗൈഡ്
ഡോർമാൻ 601-037 സ്റ്റിയറിംഗ് കോളം ലോക്ക് ആക്യുവേറ്റർ പ്രോഗ്രാം ചെയ്യുന്നതിനും പരിശോധിക്കുന്നതിനുമുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മുൻകരുതലുകളും ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകളും ഉൾപ്പെടെ.
പ്രീview Chrysler Pacifica Interior Door Handle Kit Installation and Removal Guide (2008-2004)
Step-by-step instructions for the removal and installation of the interior door handle kit for 2008-2004 Chrysler Pacifica models. Includes kit contents, required tools, and detailed procedures.
പ്രീview Dorman 03680 CV Joint Boot Installation and Maintenance Guide
Technical guide from Dorman for the installation, cleaning, inspection, and lubrication of the 03680 CV Joint Boot. Includes safety precautions, first aid, and support contact information.