ആമുഖം
This manual provides essential instructions for the safe and efficient use of your Dremel 7700-1/15 MultiPro 7.2-volt Cordless Rotary Tool. Please read this manual thoroughly before operating the tool and retain it for future reference.
The Dremel 7700-1/15 MultiPro 7.2-volt Cordless Rotary Tool, shown with its various accessories including sanding bands, grinding stones, polishing wheels, and a storage case.
സുരക്ഷാ വിവരങ്ങൾ
Always wear appropriate personal protective equipment, such as safety glasses, when operating the rotary tool. Ensure the workpiece is securely clamped. Keep hands and loose clothing away from rotating parts. Do not operate the tool near flammable liquids or gases.
സജ്ജമാക്കുക
1 ബാറ്ററി ചാർജ് ചെയ്യുന്നു
The Dremel 7700-1/15 features a removable 7.2V battery. To charge, detach the battery pack from the tool by squeezing the release tabs on both sides and pulling it off. Connect the battery pack to the provided charger and plug the charger into a standard wall outlet. Allow approximately 3 hours for a full charge.
2. ആക്സസറികൾ ഘടിപ്പിക്കൽ
- Press and hold the shaft lock button located on the tool's head.
- Unscrew the collet nut.
- Insert the desired accessory shank into the collet. The tool accepts accessories up to 1/8" shank.
- Tighten the collet nut securely while still holding the shaft lock button. Release the shaft lock button.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. Powering On/Off and Speed Selection
The Dremel 7700-1/15 has a 2-speed switch (10,000 and 20,000 RPM). Slide the switch to "LO" for 10,000 RPM or "HI" for 20,000 RPM. To turn off the tool, slide the switch to the "OFF" position.
2. പൊതുവായ ഉപയോഗ നുറുങ്ങുകൾ
- Apply light pressure when working. Let the tool's speed do the work.
- For best results, use the appropriate accessory for the task.
- The compact and lightweight design allows for easy handling and reduced fatigue during extended use.
മെയിൻ്റനൻസ്
1. വൃത്തിയാക്കൽ
Regularly clean the tool's ventilation openings to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
2. ബാറ്ററി പരിചരണം
Store the battery in a cool, dry place. For optimal battery life, avoid fully discharging the battery before recharging. Refer to model No. 757-01 for replacement battery packs.
3. ആക്സസറി മാറ്റിസ്ഥാപിക്കൽ
Replace worn or damaged accessories promptly to maintain performance and safety. Follow the accessory attachment instructions when replacing.
ട്രബിൾഷൂട്ടിംഗ്
- ഉപകരണം ഓണാക്കുന്നില്ല: Ensure the battery is fully charged and properly inserted. Check the power switch position.
- കുറഞ്ഞ പ്രകടനം: The accessory may be worn, or the battery may need recharging. Ensure the correct speed setting is selected for the task.
- അമിതമായ വൈബ്രേഷൻ: Check that the accessory is correctly installed and tightened in the collet. Replace any bent or damaged accessories.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ഡ്രെമെൽ |
| മോഡൽ നമ്പർ | 7700 |
| വാല്യംtage | 7.2 വോൾട്ട് |
| പവർ ഉറവിടം | ബാറ്ററി പവർഡ് (കോർഡ്ലെസ്സ്) |
| വേഗത | 2-speed (10,000 RPM, 20,000 RPM) |
| പരമാവധി റൊട്ടേഷണൽ സ്പീഡ് | 20,000 ആർപിഎം |
| കുറഞ്ഞ വേഗത | 10,000 ആർപിഎം |
| Accepts Shank Size | Up to 1/8" |
| ഇനത്തിൻ്റെ ഭാരം | 12 ഔൺസ് |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Battery, Charger, 15 Accessories, Storage Bag |
| ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾ | Sharpening, Grinding, Engraving, Sanding, Polishing |
വാറൻ്റി വിവരങ്ങൾ
The Dremel 7700-1/15 MultiPro comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official Dremel webസൈറ്റ്.
പിന്തുണ
For technical assistance, replacement parts, or general inquiries, please contact Dremel Customer Service. Contact information can typically be found on the Dremel webഉൽപ്പന്ന പാക്കേജിംഗിനുള്ളിൽ.
Visit the official Dremel Store for more information and accessories: Dremel Store
