Atlas Sound M1000 Sound Masking Speaker Instruction Manual

ആമുഖം

The Atlas Sound M1000 is an 8-inch dual cone sound masking speaker assembly designed for installation in plenum spaces. This unit is engineered to accurately reproduce sound masking signals, contributing to acoustic privacy and comfort in various environments. It features an integrated 70.7V transformer with an external tap selector for precise system tuning and includes innovative installation hardware for simplified setup.

സുരക്ഷാ വിവരങ്ങൾ

Always adhere to local electrical codes and safety regulations during installation. Ensure power is disconnected before making any electrical connections. This product is UL 1480 and UL 2043 listed for use in air handling spaces, indicating compliance with safety standards for such environments. Installation should be performed by qualified personnel.

പാക്കേജ് ഉള്ളടക്കം

The M1000 unit comes pre-assembled and includes the following components:

• 8-inch diameter dual cone loudspeaker
• Integrated 70.7V transformer
• എൻക്ലോഷർ
• തടസ്സപ്പെടുത്തുക
• Mounting hardware (including EZ hang brackets and snap hanger assembly)

The pre-assembled unit includes the 8" dia. loudspeaker, transformer, enclosure, baffle, and mounting hardware. The EZ hang brackets and snap hanger assembly are integrated for ease of installation.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The M1000 speaker is designed for quick and easy installation in plenum spaces, utilizing its integrated EZ hang brackets.

മൗണ്ടിംഗ്

1. മൗണ്ടിംഗ് സ്ഥലം തയ്യാറാക്കുക: Identify the desired location in the plenum space. The unit is suitable for use above suspended ceiling systems or in open ceiling spaces.
2. Utilize EZ Hang Brackets: The factory-installed EZ hang brackets are collapsible and can be configured for upward, downward, or side-firing installation. Extend these brackets as needed.
3. യൂണിറ്റ് സുരക്ഷിതമാക്കുക: Use the snap hanger assembly to securely mount the speaker. An optional MCHAIN72 suspension chain system (sold separately) can also be used for quick mounting and height adjustment.

Wiring and Tap Selection

The M1000 features an innovative input panel for electrical connections.

1. Access Input Panel: The input panel includes knockouts and a strain relief connector. Remove the plate to access wiring terminals.
2. വയറിംഗ് ബന്ധിപ്പിക്കുക: Connect the 70.7V audio signal wiring to the terminals. The system accommodates rigid or flexible conduit if required. An integral wire strain relief ensures secure cable termination.
3. Select Power Tap: Use the external tap selector switch to choose the desired power setting (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for the 70.7V system. This allows for precise system tuning to achieve the required sound masking level. Ensure the "OFF" position is selected before making connections.

ചിത്രം 1: Atlas Sound M1000 speaker with visible tap selector switch and wiring input. The switch allows selection of power taps from 0.25W to 4.0W for 70.7V systems, or the 'OFF' position.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Atlas Sound M1000 is a passive sound masking speaker. Once properly installed and connected to a 70.7V sound masking system, its operation is integrated with the overall system control. The primary operational adjustment is the power tap selection.

• Power Tap Adjustment: The external tap selector switch allows you to set the speaker's output power (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for 70.7V systems. Adjust this setting to achieve the desired sound masking level in the coverage area.
• സിസ്റ്റം ഇൻ്റഗ്രേഷൻ: The speaker will reproduce the sound masking signal provided by the connected sound masking generator or amplifier. Refer to your sound masking system's manual for overall system operation.

മെയിൻ്റനൻസ്

The Atlas Sound M1000 speaker requires minimal maintenance.

• വൃത്തിയാക്കൽ: Periodically inspect the speaker and enclosure for dust accumulation. Clean with a soft, dry cloth. Do not use liquid cleaners directly on the speaker components.
• പരിശോധന: Annually inspect wiring connections and mounting hardware to ensure they remain secure.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Ensure the speaker is operated within its specified environmental conditions. It is designed for plenum spaces.

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues with your M1000 sound masking speaker, consider the following:

• സൗണ്ട് ഔട്ട്പുട്ട് ഇല്ല:
  • Verify that the sound masking system ampലൈഫയർ ഓണാക്കി ശരിയായി പ്രവർത്തിക്കുന്നു.
  • എന്നതിൽ നിന്നുള്ള എല്ലാ വയറിംഗ് കണക്ഷനുകളും പരിശോധിക്കുക amplifier to the speaker for continuity and secure termination.
  • Ensure the tap selector switch on the M1000 is not set to "OFF" and is set to a desired wattage (e.g., 0.25W, 0.5W, 1.0W, 2.0W, 4.0W).
  • ഇൻപുട്ട് വോളിയം സ്ഥിരീകരിക്കുകtage 70.7V ആണ്.
• Low Sound Output:
  • Adjust the tap selector switch to a higher wattagഇ ക്രമീകരണം.
  • Check the output level of the sound masking system ampജീവൻ.
• വികലമായ ശബ്ദം:
  • Ensure the input signal from the sound masking system is not overdriving the speaker.
  • സ്പീക്കർ കോൺ എന്തെങ്കിലും ശാരീരിക കേടുപാടുകൾക്കായി പരിശോധിക്കുക.

If issues persist, contact Atlas Sound technical support.

സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 2: Dimensions of the Atlas Sound M1000 speaker, measuring 11.5" D x 11.5" W x 5.5" H.

വാറൻ്റി വിവരങ്ങൾ

The Atlas Sound M1000 speaker comes with a Limited Warranty. For specific terms and conditions, please refer to the official Atlas Sound warranty documentation provided with your purchase or visit the Atlas Sound website. This warranty typically covers defects in materials and workmanship under normal use.

പിന്തുണയും കോൺടാക്‌റ്റും

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Atlas Sound customer support:

• നിർമ്മാതാവ്: അറ്റ്ലസ് സൗണ്ട്
• Webസൈറ്റ്: www.atlassound.com
• Refer to your product packaging or the Atlas Sound webഏറ്റവും പുതിയ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.