Intermatic EI400WC

Intermatic EI400WC Electronic Auto-Off Timer

ഉപയോക്തൃ നിർദ്ദേശ മാനുവൽ

Model: EI400WC | Brand: Intermatic

1. ആമുഖം

The Intermatic EI400WC Electronic Auto-Off Timer is designed to provide convenient and energy-efficient control over various electrical loads. This in-wall timer allows for precise countdown timing from 1 second to 24 hours, making it suitable for a wide range of applications including lighting, fans, and appliances. Its user-friendly interface and robust design ensure reliable operation.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Risk of Electric Shock. May result in serious injury or death. Turn power OFF at circuit breaker before installing.

3. പാക്കേജ് ഉള്ളടക്കം

4. ഇൻസ്റ്റലേഷൻ

The EI400WC timer is designed for easy installation, compatible with both single-pole and 3-way switch configurations. It does not require a neutral wire connection, simplifying retrofitting.

4.1. Wiring Diagram Overview

Below is an image of the Intermatic EI400WC timer, showing its compact design and wiring leads for installation into a standard wall box.

Intermatic EI400WC Electronic Auto-Off Timer

Figure 1: Intermatic EI400WC Electronic Auto-Off Timer with wiring leads.

4.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

  1. പവർ ഓഫ് ചെയ്യുക: നിങ്ങൾ മാറ്റിസ്ഥാപിക്കുന്ന സ്വിച്ച് നിയന്ത്രിക്കുന്ന സർക്യൂട്ട് ബ്രേക്കർ കണ്ടെത്തി അത് ഓഫ് ചെയ്യുക. ഒരു വോള്യം ഉപയോഗിച്ച് പവർ ഓഫാണെന്ന് ഉറപ്പാക്കുക.tagഇ ടെസ്റ്റർ.
  2. നിലവിലുള്ള സ്വിച്ച് നീക്കം ചെയ്യുക: വാൾ പ്ലേറ്റ് ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്ത് നിലവിലുള്ള സ്വിച്ച് വാൾ ബോക്സിൽ നിന്ന് അഴിക്കുക. പഴയ സ്വിച്ചിൽ നിന്ന് വയറുകൾ വിച്ഛേദിക്കുക.
  3. Connect the timer:
    • Connect the timer's wires to the corresponding house wires using the provided wire nuts. Refer to the specific wiring diagram for single-pole or 3-way applications.
    • The EI400WC does not require a neutral wire, simplifying connections.
    • എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക.
  4. Mount the timer: Gently push the connected wires back into the wall box. Secure the timer to the wall box using the mounting screws.
  5. വാൾ പ്ലേറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: Attach the new or existing wall plate over the timer.
  6. പവർ പുനഃസ്ഥാപിക്കുക: സർക്യൂട്ട് ബ്രേക്കറിൽ വീണ്ടും പവർ ഓൺ ചെയ്യുക.

4.3. ഇൻസ്റ്റലേഷൻ വീഡിയോ ഗൈഡ്

For a visual guide on installing and setting up Intermatic in-wall timers, including the EI400 series, please watch the following video. The relevant section for programmable electronic timers begins at 0:55.

Video: Intermatic In-Wall Timer Overview. This segment specifically covers the EI400 programmable electronic countdown timer, demonstrating its features and installation considerations.

5. സജ്ജീകരണവും പ്രോഗ്രാമിംഗും

The EI400WC timer offers simple programming for countdown times from 1 second to 24 hours. Settings are stored in a non-volatile memory.

  1. Setting the Countdown Time: Use the '+' and '-' buttons on the timer to adjust the desired countdown duration. The digital display will show the selected time.
  2. ടൈമർ സജീവമാക്കുന്നു: Press the 'on/off' button once to activate the countdown. The connected load will turn ON and remain on for the programmed duration.
  3. Audible/Visual Warning: The timer can be configured to provide a visual or audible warning before the countdown expires and the load turns OFF. Refer to the detailed manual for specific warning setup.
  4. Lockable Settings: To prevent unintended changes to the programmed settings, the timer features a lockable setting. Consult the full manual for instructions on enabling/disabling this feature.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

7. പരിപാലനം

The Intermatic EI400WC timer is designed for minimal maintenance. The internal CR2 lithium battery provides power for up to three years and is replaceable.

7.1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

  1. പവർ ഓഫ് ചെയ്യുക: For safety, turn off power to the timer at the circuit breaker before replacing the battery.
  2. Access battery compartment: Locate the battery compartment, usually behind a small cover on the front or side of the timer.
  3. ബാറ്ററി മാറ്റുക: Remove the old CR2 lithium battery and insert a new one, ensuring correct polarity.
  4. Close compartment: ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ സുരക്ഷിതമായി അടയ്‌ക്കുക.
  5. പവർ പുനഃസ്ഥാപിക്കുക: സർക്യൂട്ട് ബ്രേക്കറിൽ വീണ്ടും പവർ ഓൺ ചെയ്യുക.

8. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Timer does not turn ON/OFF load.No power to the timer; incorrect wiring; dead battery.Check circuit breaker. Verify wiring connections. Replace CR2 battery.
ഡിസ്പ്ലേ ശൂന്യമോ മങ്ങിയതോ ആണ്.ബാറ്ററി കുറവോ ഡെഡ് ബാറ്ററിയോ.CR2 ലിഥിയം ബാറ്ററി മാറ്റിസ്ഥാപിക്കുക.
Timer does not hold settings.Battery issue; settings not locked.Ensure battery is fresh and properly installed. Check if lockable settings are enabled (refer to full manual).

If the problem persists after attempting these solutions, please contact Intermatic customer support.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

The Intermatic EI400WC Electronic Auto-Off Timer comes with a 5 വർഷത്തെ പരിമിത വാറൻ്റി from the date of purchase. This warranty covers defects in material and workmanship under normal use and service.

For warranty claims, technical support, or further assistance, please visit the official Intermatic webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക. വാറന്റി സാധൂകരണത്തിനായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

ഇന്റർമാറ്റിക് ഒഫീഷ്യൽ Webസൈറ്റ്: www.intermatic.com

അനുബന്ധ രേഖകൾ - EI400WC

പ്രീview Intermatic EI400 Series Digital Auto Shut-Off Timer: Installation and User Instructions
Comprehensive installation and user guide for the Intermatic EI400 Series Digital Auto Shut-Off Timer. Learn how to install, set up, and troubleshoot this electronic timer for controlling lights and appliances, with detailed wiring instructions and operational tips.
പ്രീview Intermatic EI220 Electronic In-Wall Countdown Timer: Installation and Operation Guide
Comprehensive guide for installing and operating the Intermatic EI220 electronic in-wall countdown timer. Covers features, electrical ratings, step-by-step installation, operational modes (Timer and Hold), and warranty information.
പ്രീview ഇന്റർമാറ്റിക് EI210 ഇലക്ട്രോണിക് ഇൻ-വാൾ കൗണ്ട്ഡൗൺ ടൈമർ - ഇൻസ്റ്റലേഷൻ & ഓപ്പറേഷൻ ഗൈഡ്
ഇന്റർമാറ്റിക് EI210 ഇലക്ട്രോണിക് ഇൻ-വാൾ കൗണ്ട്‌ഡൗൺ ടൈമറിനായുള്ള സമഗ്ര ഗൈഡ്, വിശദമായ സവിശേഷതകൾ, ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങൾ, പ്രവർത്തന മോഡുകൾ (ടൈമറും ഹോൾഡും), വാറന്റി വിവരങ്ങൾ എന്നിവയും ഇതിൽ ഉൾപ്പെടുന്നു. ഇന്റർമാറ്റിക് ഇൻകോർപ്പറേറ്റഡിന്റെ സാങ്കേതിക സവിശേഷതകളും ബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങളും ഉൾപ്പെടുന്നു.
പ്രീview ഇന്റർമാറ്റിക് EI200 ഇലക്ട്രോണിക് ഇൻ-വാൾ കൗണ്ട്ഡൗൺ ടൈമർ ഇൻസ്റ്റാളേഷനും ഓപ്പറേഷൻ ഗൈഡും
ഇന്റർമാറ്റിക് EI200 ഇലക്ട്രോണിക് ഇൻ-വാൾ കൗണ്ട്‌ഡൗൺ ടൈമർ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള വിശദമായ ഗൈഡ്. 5-30 മിനിറ്റ് സമയ ശ്രേണികൾ, തുടർച്ചയായ ഹോൾഡ് മോഡ്, 15A ജനറൽ പർപ്പസ്, 1000W ടങ്സ്റ്റൺ, 1/4 HP മോട്ടോറുകൾ എന്നിവയ്ക്കുള്ള റേറ്റിംഗുകൾ സവിശേഷതകളിൽ ഉൾപ്പെടുന്നു. വാറന്റി വിവരങ്ങൾ ഉൾപ്പെടുന്നു.
പ്രീview ഇന്റർമാറ്റിക് EI200 ഇലക്ട്രോണിക് ഇൻ-വാൾ കൗണ്ട്ഡൗൺ ടൈമർ - ഇൻസ്റ്റാളേഷനും ഓപ്പറേഷൻ ഗൈഡും
ഇന്റർമാറ്റിക് EI200 ഇലക്ട്രോണിക് ഇൻ-വാൾ കൗണ്ട്ഡൗൺ ടൈമറിനായുള്ള വിശദമായ ഗൈഡ്. സവിശേഷതകൾ, റേറ്റിംഗുകൾ, ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങൾ, പ്രവർത്തന മോഡുകൾ (ടൈമർ മോഡ്, ഹോൾഡ് മോഡ്), 1 വർഷത്തെ പരിമിത വാറന്റി എന്നിവ ഉൾക്കൊള്ളുന്നു. വയറിംഗ് ഡയഗ്രമുകളും സുരക്ഷാ മുന്നറിയിപ്പുകളും ഉൾപ്പെടുന്നു.
പ്രീview Intermatic EI205 Electronic In-Wall Countdown Timer: Installation and Operation Guide
Comprehensive guide for installing and operating the Intermatic EI205 electronic in-wall countdown timer. Covers features, ratings, step-by-step installation, operation modes, and a 1-year limited warranty. Ideal for controlling lighting and loads with timed shut-off.