Leviton 1254-R

ലെവിറ്റൺ 15 Amp 125 Volt Industrial Grade 4-in-1 Receptacle (Model 1254-R) Instruction Manual

മോഡൽ: 1254-R

1. ആമുഖം

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Leviton 15 Amp, 125 Volt, Industrial Series Extra Heavy Duty Grade, 4-In-1 Receptacle, Model 1254-R. This device is designed for demanding environments requiring high-abuse tolerance, such as healthcare facilities, manufacturing plants, and educational institutions. It features four outlets in a single-gang footprint, offering increased power access without requiring larger electrical boxes.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. All wiring must be in accordance with national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

3. പാക്കേജ് ഉള്ളടക്കം

The package for the Leviton 1254-R 4-in-1 Receptacle typically includes:

4 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
മോഡൽ നമ്പർ1254-ആർ
Ampഉന്മേഷം15 Amp
വാല്യംtage125 വോൾട്ട്
ഗ്രേഡ്Industrial Series Extra Heavy Duty Grade
റിസപ്ടക്കിൾ തരം4-In-1, Straight Blade, Grounding
നിറംചുവപ്പ്
മെറ്റീരിയൽThermoplastic Nylon (Cover and Body)
വയറിംഗ് ഓപ്ഷനുകൾBack and Side Wiring
ബന്ധങ്ങൾExtra Heavy-Duty, T-type triple-wipe bronze
അളവുകൾഏകദേശം 8 x 8 x 8 ഇഞ്ച് (ഉൽപ്പന്ന അളവുകൾ)
ഭാരംഏകദേശം 6.4 ഔൺസ്

5. ഇൻസ്റ്റലേഷൻ

Follow these steps for proper installation of your Leviton 4-in-1 Receptacle. If you are not familiar with electrical wiring, consult a qualified electrician.

  1. പവർ ഓഫ് ചെയ്യുക: Locate the circuit breaker or fuse that controls the outlet where you intend to install the receptacle. Turn it OFF. Verify that the power is off using a voltagഇ ടെസ്റ്റർ.
  2. പഴയ പാത്രം നീക്കം ചെയ്യുക (ബാധകമെങ്കിൽ): Unscrew the wall plate and then the mounting screws holding the existing receptacle in the electrical box. Carefully pull the old receptacle out of the box.
  3. വയറുകൾ വിച്ഛേദിക്കുക: Disconnect the wires from the old receptacle. Note which wire was connected to which terminal (hot, neutral, ground).
  4. വയറുകൾ തയ്യാറാക്കുക: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure the wire ends are clean and straight.
  5. പുതിയ പാത്രത്തിലേക്ക് വയറുകൾ ബന്ധിപ്പിക്കുക:
    • ബന്ധിപ്പിക്കുക HOT (Black or Red) വയർ വരെ പിച്ചള ടെർമിനൽ സ്ക്രൂകൾ.
    • ബന്ധിപ്പിക്കുക ന്യൂട്രൽ (വെളുപ്പ്) വയർ വരെ വെള്ളി ടെർമിനൽ സ്ക്രൂകൾ.
    • ബന്ധിപ്പിക്കുക GROUND (Green or Bare Copper) വയർ വരെ പച്ച ഗ്രൗണ്ടിംഗ് സ്ക്രൂ.

    This receptacle supports both back-wiring (inserting wires into holes on the back and tightening screws) and side-wiring (wrapping wires around terminal screws). Ensure connections are tight and no bare wire is exposed outside the terminals.

    Leviton 1254-R 4-in-1 Receptacle, Red

    ചിത്രം 5.1: മുൻഭാഗം view of the Leviton 1254-R 4-in-1 Receptacle in Red. This image shows the four outlets and the robust construction.

    Close-up of receptacle wiring terminals

    ചിത്രം 5.2: ക്ലോസ്-അപ്പ് view of a Leviton receptacle's wiring terminals, illustrating the side-wiring option and the grounding screw.

  6. മൗണ്ട് റിസപ്റ്റാക്കിൾ: Carefully push the wired receptacle back into the electrical box. Secure it with the provided mounting screws.
  7. വാൾ പ്ലേറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: Attach the wall plate over the receptacle.
  8. പവർ പുന ore സ്ഥാപിക്കുക: Turn the circuit breaker or fuse back ON.
  9. ടെസ്റ്റ്: Plug a device into each of the four outlets to ensure proper function.

The 1254-R features an interlocking thermoplastic nylon cover and body for enhanced durability and a nickel-plated brass strap with integral ground contacts for reliable grounding. The permanent "Green Dot" marking on the face indicates its hospital/industrial grade compliance.

Close-up of receptacle with green dot marking

Image 5.3: Detail showing the "Green Dot" marking, signifying the industrial/hospital grade rating of the receptacle.

6. ഓപ്പറേഷൻ

The Leviton 1254-R 4-in-1 Receptacle operates like any standard electrical outlet. Simply insert the plug of your electrical device into one of the four available receptacles. Ensure the plug is fully inserted for a secure connection. The extra heavy-duty, T-type triple-wipe bronze contacts provide maximum performance and a strong grip on cords.

7. പരിപാലനം

This industrial-grade receptacle requires minimal maintenance. Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the receptacle immediately. Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
പാത്രത്തിൽ വൈദ്യുതി ഇല്ല.Circuit breaker tripped or fuse blown. Loose wiring connection.Check and reset the circuit breaker or replace the fuse. Turn off power and inspect wiring connections for tightness.
Device plug feels loose in the outlet.Worn contacts (unlikely for new industrial grade). Incorrect plug type.Ensure the plug is fully inserted. If the issue persists, and the receptacle is old, consider replacement. Verify plug compatibility.
Receptacle is warm to the touch.Overload on the circuit. Loose wiring connection.Disconnect some devices to reduce load. Turn off power and check wiring connections. If warming persists, consult an electrician.

9. വാറൻ്റി വിവരങ്ങൾ

Leviton products are backed by a limited warranty. For specific warranty terms and conditions applicable to the 1254-R receptacle, please refer to the warranty documentation included with your purchase or visit the official Leviton webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

10. പിന്തുണ

For technical assistance, product information, or customer support, please visit the official Leviton website or contact their customer service department. Contact details can typically be found on the product packaging or the Leviton webസൈറ്റ്.

ലെവിറ്റൺ Webസൈറ്റ്: www.leviton.com

അനുബന്ധ രേഖകൾ - 1254-ആർ

പ്രീview യുഎസ്ബി പോർട്ട് ഇൻസ്റ്റാളേഷനും ഓപ്പറേഷൻ മാനുവലും ഉള്ള ലെവിറ്റൺ ജിഎഫ്സിഐ ഔട്ട്ലെറ്റ്
വയറിംഗ് നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മുന്നറിയിപ്പുകൾ, പരിശോധനാ നടപടിക്രമങ്ങൾ, വാറന്റി വിവരങ്ങൾ എന്നിവയുൾപ്പെടെ, USB പോർട്ടുകൾ ഉപയോഗിച്ച് ലെവിറ്റൺ GFCI ഔട്ട്‌ലെറ്റുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള സമഗ്രമായ ഗൈഡ്.
പ്രീview ലെവിറ്റൺ സ്മാർട്ട് ജിഎഫ്സിഐ ഔട്ട്‌ലെറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുകയും പരിശോധിക്കുകയും ചെയ്യുന്നു: ഒരു സമഗ്ര ഗൈഡ്
ലെവിറ്റൺ സ്മാർട്ട് ജിഎഫ്സിഐ ഔട്ട്‌ലെറ്റുകൾ (മോഡലുകൾ D2GF1, D2GF2) ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പരിശോധിക്കുന്നതിനുമുള്ള ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ. ജിഎഫ്സിഐ പ്രവർത്തനം, വയറിംഗ്, ട്രബിൾഷൂട്ടിംഗ്, സുരക്ഷാ മുൻകരുതലുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview ലെവിറ്റൺ സ്മാർട്ട്‌ലോക്ക്‌പ്രോ GFCI റിസപ്റ്റാക്കിൾ ഇൻസ്റ്റാളേഷനും ടെസ്റ്റിംഗ് ഗൈഡും
ലെവിറ്റൺ സ്മാർട്ട്‌ലോക്ക്‌പ്രോ ഗ്രൗണ്ട് ഫോൾട്ട് സർക്യൂട്ട് ഇന്ററപ്റ്റർ (GFCI) റെസെപ്റ്റക്കിളുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പരിശോധിക്കുന്നതിനുമുള്ള സമഗ്രമായ ഗൈഡ്. സുരക്ഷാ മുൻകരുതലുകൾ, വയറിംഗ്, ട്രബിൾഷൂട്ടിംഗ്, ഉൽപ്പന്ന സവിശേഷതകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ലെവിറ്റൺ GFCI റിസപ്റ്റാക്കിൾ ഇൻസ്റ്റാളേഷനും ടെസ്റ്റിംഗ് ഗൈഡും
വയറിംഗ് നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മുൻകരുതലുകൾ, ട്രബിൾഷൂട്ടിംഗ് നുറുങ്ങുകൾ എന്നിവയുൾപ്പെടെ, ലെവിറ്റൺ സ്മാർട്ട്‌ലോക്ക് പ്രോ ജിഎഫ്‌സിഐ റിസപ്റ്റാക്കിൾ എങ്ങനെ ഇൻസ്റ്റാൾ ചെയ്യാമെന്നും പരിശോധിക്കാമെന്നും ഉള്ള ഒരു സമഗ്ര ഗൈഡ്.
പ്രീview ലെവിറ്റൺ GFNT1-DIN/GFNT2-DIN DIN റെയിൽ മൗണ്ട് GFCI റിസപ്റ്റാക്കിൾ ഇൻസ്റ്റലേഷൻ ഗൈഡ്
ലെവിറ്റണിന്റെ GFNT1-DIN, GFNT2-DIN DIN റെയിൽ മൗണ്ട് GFCI റിസപ്റ്റക്കിളുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പരിശോധിക്കുന്നതിനുമുള്ള സമഗ്രമായ ഗൈഡ്, വയറിംഗ് നിർദ്ദേശങ്ങൾ, സുരക്ഷാ മുൻകരുതലുകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview Leviton Smart Wallbox Sensors: Elevate Your Sensing Control Options
Discover Leviton Smart Wallbox Sensors for commercial applications, offering occupancy/vacancy sensing, dimming, switching, energy savings, and code compliance for offices, meeting rooms, and lobbies. Learn about key features and benefits.