1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Leviton 25W34 is a 15-Amp, 277-Volt, industrial-grade, grounding, locking connector, part of the Wetguard product line. These devices are engineered for demanding industrial applications where electrical connections are exposed to wet and dusty locations. They meet stringent IEC IP67 and NEMA ratings for water ingress protection, ensuring reliable performance in harsh environments.
The connector features a durable Santoprene TPV material in yellow, with an L7-15R configuration and 3 wires. It is approved by UL 498, CSA C22.2, and NOM 057 standards.
2 പ്രധാന സവിശേഷതകൾ
- Polarized Type: Ensures correct electrical connection.
- Santoprene TPV Material: Provides resistance to water, acids, alkalis, industrial lubricants, cleaners, and solvents.
- L7-15R Configuration: A specific locking type for secure connections.
- 3 വയറുകൾ: Standard wiring for this type of connector.
- അംഗീകാരങ്ങൾ: UL 498, CSA C22.2, NOM 057 certified for safety and performance.
- വാല്യംtage/Current Rating: 277V വോളിയംtagഇ, 15 Ampere Current.
- ഗ്രൗണ്ടിംഗ്: Includes a grounding pole for safety.
- വെള്ളം കടക്കാത്തതും പൊടി കടക്കാത്തതും: Meets IEC IP66 & IP67 and NEMA Type 4, 4X, 6, 6P protection ratings when properly mated or with closure caps.
- നാശ പ്രതിരോധം: Electroless nickel-coated brass blades, contacts, terminal screws, and wiring clamps enhance durability in corrosive environments.
- എളുപ്പമുള്ള വയറിംഗ്: Deep wire wells facilitate easier wiring.
- ക്ലിയർ ഹൗസിംഗ്: Allows for visual inspection of proper wire insertion and connection.
- സുരക്ഷിത കണക്ഷൻ: Patented compression nut and strain relief system ensures integrity of both the watertight seal and electrical connection.
3. ഉൽപ്പന്ന ഘടകങ്ങൾ
The Leviton 25W34 locking connector is engineered with robust components to ensure reliable performance in challenging conditions.
Image: The Leviton 25W34 Wetguard Locking Connector, shown in its yellow industrial-grade housing.
For a visual demonstration of the Wetguard product line's features and components, please refer to the video below:
വീഡിയോ: ഒരു ഓവർview of Leviton Wetguard wiring devices, highlighting their robust design, watertight capabilities, and various applications in industrial environments. This video demonstrates the features of plugs, connectors, inlets, outlets, and FD boxes within the Wetguard line.
4. ഇൻസ്റ്റലേഷനും വയറിംഗും
Proper installation and wiring are crucial for the safe and effective operation of the Leviton 25W34 locking connector. Always ensure power is disconnected before beginning any wiring procedures.
കണക്റ്റർ വയറിംഗ്
- വേർപെടുത്തുക: Carefully unscrew the compression nut and separate the housing components to access the wiring module.
- വയർ തയ്യാറാക്കൽ: Strip the insulation from the ends of the three wires (hot, neutral, ground) according to standard electrical practices, ensuring sufficient bare wire for connection.
- കണക്ഷൻ: Insert each wire into its corresponding deep wire well on the wiring module. The clear housing allows for visual confirmation of proper wire insertion. Securely tighten the terminal screws to ensure a firm electrical connection.
- അസംബ്ലി: Reassemble the housing components, ensuring the patented compression nut and strain relief system are correctly engaged. Tighten the compression nut to create a secure, watertight seal around the cable.
The electroless nickel-coated brass blades, contacts, terminal screws, and wiring clamps are designed for enhanced resistance to harsh industrial environments and corrosion, contributing to a long-lasting and reliable connection.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Leviton 25W34 locking connector is designed for secure electrical connections in wet and dusty industrial environments. Follow these instructions for proper operation:
- Mating the Connector: Align the blades of the plug with the corresponding slots in the receptacle (or vice-versa for a connector). Insert the plug fully and twist to lock it into place. The L7-15R configuration ensures a secure, twist-lock connection, preventing accidental disconnections during operation.
- Maintaining Protection: When the connector is not in use, ensure that any closure caps are securely in place. This maintains the device's IP66/IP67 and NEMA Type 4, 4X, 6, 6P protection ratings against water and dust ingress.
- വിച്ഛേദിക്കൽ: To disconnect, twist the plug in the opposite direction to unlock it, then pull it straight out from the receptacle.
6. പരിപാലനം
Regular maintenance helps ensure the longevity and optimal performance of your Leviton 25W34 Wetguard locking connector.
- പരിശോധന: Periodically inspect the connector for any signs of wear, damage, cracks, or corrosion on the housing, blades, contacts, or terminal screws. Ensure the multi-point sealing system and compression nut are intact and free from debris.
- വൃത്തിയാക്കൽ: The Santoprene TPV husk is resistant to many industrial lubricants, cleaners, and solvents. Clean the device as needed using appropriate industrial cleaners that are compatible with Santoprene TPV material. Avoid abrasive cleaners or tools that could damage the housing or seals.
- മുദ്ര സമഗ്രത: Verify that all seals and gaskets are in good condition and properly seated. A compromised seal can lead to water or dust ingress, affecting performance and safety.
- ഹാർഡ്വെയർ: Check that all screws and fasteners are tight. The stainless steel hardware is designed for maximum protection against corrosion.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your Leviton 25W34 Wetguard locking connector, consider the following troubleshooting steps:
ശക്തി നഷ്ടം
- കണക്ഷൻ പരിശോധന: Ensure the plug and connector are fully mated and securely locked. A loose connection can interrupt power flow.
- ഊർജ്ജ സ്രോതസ്സ്: Verify that the power source (e.g., circuit breaker, outlet) is active and supplying power.
- ആന്തരിക വയറിംഗ്: If accessible and safe to do so (with power disconnected), inspect the internal wiring for any loose connections or damage. The clear housing can aid in this visual inspection.
Water or Dust Ingress
- Immediate Disconnection: If water or dust is observed inside the connector, immediately disconnect power to prevent electrical hazards.
- മുദ്ര പരിശോധന: Inspect the multi-point sealing system, including the compression nut and any closure caps, for proper installation and integrity. Ensure no debris is preventing a complete seal.
- ഘടകം മാറ്റിസ്ഥാപിക്കൽ: If seals or housing components are damaged, they may need to be replaced to restore the watertight and dust-tight protection.
നാശം
- ദൃശ്യ പരിശോധന: Although designed for corrosion resistance, prolonged exposure to extremely harsh chemicals or environments can still cause corrosion. Visually inspect the blades, contacts, and screws.
- മാറ്റിസ്ഥാപിക്കൽ: If significant corrosion is observed, the device may need to be replaced to ensure safe and reliable electrical contact.
8 സാങ്കേതിക സവിശേഷതകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| വയറുകളുടെ എണ്ണം | 3 |
| പ്ലഗ് ഫോർമാറ്റ് | NEMA L7-15R |
| ഉൽപ്പന്ന ഗ്രേഡ് | വ്യാവസായിക |
| സ്പെസിഫിക്കേഷൻ മെറ്റ് | CSA, NEMA, UL |
| Ampഉന്മേഷം | 15 Amps |
| യു.പി.സി | 078477969526 |
| നിർമ്മാതാവ് | ലെവിറ്റൺ |
| ഗ്ലോബൽ ട്രേഡ് ഐഡൻ്റിഫിക്കേഷൻ നമ്പർ | 00078477969526 |
| ഭാഗം നമ്പർ | 25W34 |
| ഇനത്തിൻ്റെ ഭാരം | 0.01 ഔൺസ് |
| ഉൽപ്പന്ന അളവുകൾ | 5 x 9 x 1.5 ഇഞ്ച് |
| ഇനത്തിൻ്റെ മോഡൽ നമ്പർ | 25W34 |
| പൂർത്തിയാക്കുക | മഞ്ഞ |
| കനം | 1 ഇഞ്ച് |
| ഇനത്തിൻ്റെ പാക്കേജ് അളവ് | 1 |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | 25W34 |
| ബാറ്ററികൾ ആവശ്യമുണ്ടോ? | ഇല്ല |
| വാറൻ്റി വിവരണം | നിർമ്മാണം |
| ASIN | B003AUNJN2 |
| ആദ്യ തീയതി ലഭ്യമാണ് | ഫെബ്രുവരി 27, 2009 |
| ബ്രാൻഡ് | ലെവിറ്റൺ |
| വാല്യംtage | 277 വോൾട്ട് |
| മെറ്റീരിയൽ | Brass, Nylon |
| കണക്റ്റർ തരം | പ്ലഗ്-ഇൻ |
| ധ്രുവങ്ങളുടെ എണ്ണം | 2 |
| GTIN | 078477969526 |
9. വാറൻ്റിയും പിന്തുണയും
വാറൻ്റി വിവരങ്ങൾ
The Leviton Wetguard product line, including the 25W34 locking connector, is backed by a best-in-class Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use and service. For detailed warranty terms and conditions, including limitations and exclusions, please refer to the official Leviton webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
മടങ്ങുന്നു
This product typically has a 30-day return policy for refund or replacement, subject to the retailer's specific terms and conditions. Please consult the point of purchase for their return process and requirements.
നിർമ്മാതാവിന്റെ പിന്തുണ
For further assistance, technical support, product inquiries, or to register your product, please visit the official Leviton webസൈറ്റ് (Leviton Store) or contact their dedicated customer service department. Have your product model number (25W34) and purchase information ready when contacting support.
