Telwin Telmig 170/1 Turbo 160A Welding Machine

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Telwin Telmig 170/1 Turbo is a versatile welding machine designed for both FLUX (no gas) and MIG-MAG (gas) welding processes. It offers flexibility for use with various materials including steel, stainless steel, and aluminum. The machine is equipped with thermostatic protection for enhanced safety and durability. It comes with essential MIG-MAG welding accessories and supports a 5 kg wire spool.

ചിത്രം: മുൻഭാഗം view of the Telwin Telmig 170/1 Turbo welding machine, showing its red and black casing, control panel, wheels, and connected welding cables with torch and earth clamp.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the welding machine and all accessories from the packaging. Inspect for any shipping damage.
2. പ്ലേസ്മെൻ്റ്: കത്തുന്ന വസ്തുക്കളിൽ നിന്ന് അകറ്റി, നന്നായി വായുസഞ്ചാരമുള്ള സ്ഥലത്ത്, സ്ഥിരതയുള്ളതും നിരപ്പായതുമായ ഒരു പ്രതലത്തിൽ മെഷീൻ സ്ഥാപിക്കുക.
3. പവർ കണക്ഷൻ: Ensure the machine is switched off. Connect the power cable to a suitable 230V single-phase power outlet with a 16A fuse.
4. Wire Spool Installation: Open the wire compartment and install a 5 kg welding wire spool (e.g., steel, stainless steel, or aluminum wire with appropriate diameter). Ensure the wire feeds smoothly through the guide.
5. ആക്സസറി കണക്ഷൻ:
   • Connect the MIG Torch (2.5M, part no. 742393) to the designated port on the machine.
   • Attach the Toledo 250 Earth Clamp (250A, part no. 712030) to the workpiece.
   • For MIG-MAG welding, connect the Argon Cylinder Adapter (part no. 432036) and the Rechargeable Cylinder Pressure Reducer (part no. 722341) to a gas cylinder, then connect the gas hose to the machine.
6. പ്രാരംഭ പരിശോധനകൾ: Before powering on, double-check all connections for security and proper fit.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Telmig 170/1 Turbo supports both FLUX (gasless) and MIG-MAG (with gas) welding. Select the appropriate mode and settings based on your material and welding requirements.

• മോഡ് തിരഞ്ഞെടുക്കൽ: Choose between FLUX (no gas) or MIG-MAG (gas) welding depending on your wire type and application.
• മെറ്റീരിയൽ അനുയോജ്യത: This machine is suitable for welding steel, stainless steel, and aluminum. Ensure you use the correct wire type and diameter for the material being welded.
• Regulation Positions: The machine features 6 regulation positions to adjust the welding current. Start with a lower setting and gradually increase until the desired arc stability and penetration are achieved.
• Wire Diameter Selection:
  • Steel Welding Wire: 0.6 - 0.8 mm
  • Stainless Steel Welding Wire: 0.8 mm
  • Aluminum Welding Wire: 0.8 - 1 mm
  Ensure the wire feed roller matches the selected wire diameter.
• വെൽഡിംഗ് പ്രക്രിയ:
  • Wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and protective clothing.
  • മെഷീൻ ഓണാക്കുക.
  • Initiate the arc by pressing the torch trigger. Maintain a consistent travel speed and arc length for optimal results.
  • The machine features thermostatic protection, which will automatically shut down the unit if it overheats. Allow it to cool down before resuming operation.

മെയിൻ്റനൻസ്

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ വെൽഡിംഗ് മെഷീനിന്റെ ദീർഘായുസ്സും ഒപ്റ്റിമൽ പ്രകടനവും ഉറപ്പാക്കുന്നു.

• വൃത്തിയാക്കൽ: Periodically clean the machine's exterior with a dry cloth. Ensure ventilation openings are free from dust and debris.
• വയർ ഫീഡ് സിസ്റ്റം: Inspect the wire feed rollers and liner for wear or blockages. Clean or replace as necessary to ensure smooth wire feeding.
• Torch and Earth Clamp: Check the torch nozzle, contact tip, and earth clamp for wear or damage. Replace consumables as needed. Ensure all connections are tight.
• കേബിൾ പരിശോധന: Regularly inspect all cables (power, torch, earth) for cuts, abrasions, or loose connections. Repair or replace damaged cables immediately.
• സംഭരണം: When not in use, store the machine in a dry, clean environment, protected from dust and moisture.

ട്രബിൾഷൂട്ടിംഗ്

നിങ്ങൾ നേരിട്ടേക്കാവുന്ന പൊതുവായ പ്രശ്നങ്ങൾക്കുള്ള പരിഹാരങ്ങൾ ഈ വിഭാഗം നൽകുന്നു.

• മെഷീൻ ഓണാകുന്നില്ല:
  • Check if the power cable is securely plugged into both the machine and the power outlet.
  • Verify that the power outlet is functional and the circuit breaker or fuse (16A) has not tripped.
  • Ensure the machine's power switch is in the "ON" position.
• No Arc or Weak Arc:
  • ഭൂമി പരിശോധിക്കുക clamp connection to the workpiece; ensure it is clean and secure.
  • Inspect the welding wire for proper feeding and ensure the contact tip is not clogged or worn.
  • Verify that the welding current settings are appropriate for the material thickness.
  • For MIG-MAG welding, ensure gas flow is adequate and the gas cylinder is not empty.
• Machine Overheats (Thermostatic Protection Activated):
  • The machine has built-in thermostatic protection. If it shuts down, allow it to cool down for a sufficient period (typically 10-15 minutes) before restarting.
  • Ensure adequate ventilation around the machine and that cooling vents are not obstructed.
  • Reduce the duty cycle or welding current if continuous operation is causing frequent overheating.
• വെൽഡിംഗ് ഗുണനിലവാരം മോശമാണ്:
  • Adjust welding current and wire feed speed settings.
  • Ensure the workpiece is clean and free of rust, paint, or grease.
  • Check for proper gas shielding (for MIG-MAG) and correct torch angle.

സാങ്കേതിക സവിശേഷതകൾ

Detailed specifications for the Telwin Telmig 170/1 Turbo welding machine.

Image: A table illustrating electrical specifications such as voltage, current range, maximum current, and fuse rating for the welding machine.

Image: A table illustrating additional specifications including power factor, number of regulation positions, compatible wire diameters for steel, stainless steel, and aluminum, IP protection rating, dimensions, and weight.

ആക്‌സസറികൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്

The Telwin Telmig 170/1 Turbo comes equipped with the following accessories:

• Argon Cylinder Adapter (Part No. 432036)
• MIG Torch 2.5M (Part No. 742393)
• Cable 16 MMQ 1.8M (Part No. 120302)
• Rechargeable Cylinder Pressure Reducer (Part No. 722341)
• Toledo 250 Earth Clamp 250A (Part No. 712030)

വാറൻ്റിയും പിന്തുണയും

For detailed warranty information, please refer to the warranty card included with your product or contact your authorized Telwin dealer or the manufacturer directly. Support inquiries can be directed to Telwin's official customer service channels, typically found on their webസൈറ്റ്.