Claber Aquadue Duplo Evolution Digital Watering Timer

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Claber Aquadue Duplo Evolution Digital Watering Timer is designed for efficient and flexible irrigation management. This digital timer allows for the control of two independent watering lines simultaneously, offering extensive programming options to suit various gardening needs.

പ്രധാന സവിശേഷതകൾ:

• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: ദീർഘായുസ്സിനായി ഉയർന്ന നിലവാരമുള്ള പ്ലാസ്റ്റിക്കിൽ നിർമ്മിച്ചത്.
• എളുപ്പമുള്ള പ്രോഗ്രാമിംഗ്: Intuitive interface for straightforward setup.
• Dual Line Control: Manages up to two different irrigation cycles at the same time.
• ബഹുമുഖ ക്രമീകരണങ്ങൾ: Offers many different programming possibilities for customized watering.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation ensures optimal performance and longevity of your watering timer.

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The timer requires a 9V alkaline battery (not included). Ensure the battery is new at the beginning of each watering season.

1. Press the two side buttons on the timer to open the unit.
2. Connect a new 9V alkaline battery to the connector inside the unit.
3. Fit the battery securely into its pocket and close the cover with light pressure until it clicks into place.
4. Upon battery connection, the display will turn on, and the valve will open for approximately 2 seconds before the timer clock automatically resets to 00:00.

2. Timer Installation on Water Tap

Attach the timer securely to your outdoor water tap.

1. Screw the timer onto the water tap.
2. Fully tighten the ring nut by hand. No tools are required for this step.
3. Connect your garden hoses to the provided fittings at the bottom of the timer.
4. Remember to turn on the water tap after installation.

Image: Claber Aquadue Duplo Evolution Digital Watering Timer installed on an outdoor water tap with hoses connected.

3. ഫിൽട്ടർ ക്ലീനിംഗ്

The timer is protected by a wire mesh filter to ensure long-lasting, trouble-free operation. Regular cleaning is recommended.

1. Unscrew the ring nut at the top of the timer.
2. Remove the filter from its seat.
3. Wash the filter thoroughly under running water to remove any debris.
4. Reinsert the clean filter and tighten the ring nut.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Claber Aquadue Duplo Evolution operates two independent lines (Line A and Line B) and is programmed using just three buttons: Forward, Back, and Enter. All data is shown on a clear LCD display.

നിലവിലെ സമയം സജ്ജമാക്കുന്നു

1. അമർത്തുക പ്രവേശിക്കുക ബട്ടൺ.
2. ഉപയോഗിക്കുക മുന്നോട്ട് (▲) കൂടാതെ തിരികെ (▼) arrow keys to set the current time.
3. അമർത്തുക പ്രവേശിക്കുക again to confirm the set time.

Daily Programming

The timer allows for up to six daily programs (three for Line A: 1, 3, 5; and three for Line B: 2, 4, 6).

1. പ്രധാന സ്ക്രീനിൽ നിന്ന്, അമർത്തുക മുന്നോട്ട് (▲) arrow key to display Program 1 on Line A.
2. അമർത്തുക പ്രവേശിക്കുക. ഉപയോഗിക്കുക മുന്നോട്ട് (▲) കൂടാതെ തിരികെ (▼) arrow keys to set the desired തുറക്കുക (start) time for the program. Press പ്രവേശിക്കുക സ്ഥിരീകരിക്കാൻ.
3. അമർത്തുക മുന്നോട്ട് (▲) arrow key again to display the അടച്ചു (end) time. Press പ്രവേശിക്കുക. ഉപയോഗിക്കുക മുന്നോട്ട് (▲) കൂടാതെ തിരികെ (▼) arrow keys to set the desired end time. Press പ്രവേശിക്കുക സ്ഥിരീകരിക്കാൻ.
4. Repeat these steps for programs 3 and 5 on Line A, and programs 2, 4, and 6 on Line B.

Weekly Programming

This function allows you to skip watering on specific days of the week. This setting applies to both lines.

1. പ്രധാന സ്ക്രീനിൽ നിന്ന്, അമർത്തുക മുന്നോട്ട് (▲) arrow key until the weekly programming screen is displayed (showing days 1-7). Day 1 corresponds to the day the first watering program is set.
2. അമർത്തുക പ്രവേശിക്കുക.
3. ഉപയോഗിക്കുക മുന്നോട്ട് (▲) അല്ലെങ്കിൽ തിരികെ (▼) arrow keys to position the cursor under the day you wish to skip.
4. അമർത്തുക പ്രവേശിക്കുക to cancel watering for that selected day. Repeat for other days as needed.
5. To exit the weekly programming page, position the cursor under "EXIT" (if available, or navigate back to time setting) and press പ്രവേശിക്കുക.

മാനുവൽ പ്രവർത്തനം

The manual function allows you to water plants on demand without affecting your set programs. Each manual operation runs for 15 minutes.

1. പ്രധാന സ്ക്രീനിൽ നിന്ന്, അമർത്തുക മുന്നോട്ട് (▲) arrow key until the manual programming screen is displayed.
2. അമർത്തുക പ്രവേശിക്കുക.
3. ഉപയോഗിക്കുക തിരികെ (▼) button to open Line A manually. The display will show "A OPEN".
4. ഉപയോഗിക്കുക മുന്നോട്ട് (▲) button to close Line A manually. The display will show "A CLOSED".
5. To switch to Line B, press the മുന്നോട്ട് (▲) arrow key. The display will show "B".
6. ഉപയോഗിക്കുക തിരികെ (▼) button to open Line B manually. The display will show "B OPEN".
7. ഉപയോഗിക്കുക മുന്നോട്ട് (▲) button to close Line B manually. The display will show "B CLOSED".
8. To exit the manual function for a line, press പ്രവേശിക്കുക.

കുറിപ്പ്: If left open, the valve will automatically close after 15 minutes.

Viewപ്രോഗ്രാമുകൾ

• From the main screen, repeatedly press the മുന്നോട്ട് (▲) key button. The display will cycle through all set start and end times for both Line A and Line B, as well as the weekly programming and manual function screens.

Official Product Video: Programming and Features

Video: A comprehensive guide to installing, programming, and utilizing the various features of the Claber Aquadue Duplo Evolution Digital Watering Timer.

മെയിൻ്റനൻസ്

ശൈത്യകാല സംരക്ഷണം

To protect your timer from freezing temperatures and ensure its longevity, follow these steps at the end of the warm season, before the first winter frosts:

1. Turn off the water supply to the tap where the timer is installed.
2. Disconnect the timer from the tap.
3. Remove the 9V battery from the timer.
4. Store the timer indoors in a dry place, sheltered from freezing temperatures and dampനെസ്.

Following these steps will help maintain the timer's condition for many seasons to come.

Rain Sensor (Optional Accessory)

The Claber Aquadue Duplo Evolution timer can be connected to an optional Claber Rain Sensor (Model 90915, sold separately). This sensor automatically suspends the watering program in case of rain and resumes it when the weather turns fine again, preventing overwatering and conserving water.

Connecting the Rain Sensor:

1. Open the timer unit by pressing the two side buttons.
2. Locate the sensor socket inside the timer.
3. Remove the factory-installed jumper from the sensor socket.
4. Connect the rain sensor lead to the socket provided. No tools are required.
5. Close the timer unit cover securely.

Image: Excerpt from the Claber Aquadue Duplo Evolution manual illustrating the connection of the rain sensor.

സ്പെസിഫിക്കേഷനുകൾ

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your Claber Aquadue Duplo Evolution timer, consider the following common solutions:

• ടൈമർ ഓണാക്കുന്നില്ല: Check if the 9V battery is correctly installed and has sufficient charge. Replace with a new battery if necessary.
• വെള്ളം ഒഴുകുന്നില്ല:
  • Ensure the main water tap is fully open.
  • Check if the internal filter is clean and not clogged. Refer to the "Filter Cleaning" section.
  • Verify that the programming is correct and the current time is set accurately.
  • If a rain sensor is connected, check if it is dry. The sensor will prevent watering if it detects rain.
• Timer Not Following Program:
  • Double-check all daily and weekly programming settings.
  • Ensure the current time and day are correctly set on the timer.
• Leaking from Connections: Ensure all connections, including the timer to the tap and hoses to the timer, are tightly secured by hand. Check for any damaged O-rings or washers.

For persistent issues, please contact Claber customer support.

വാറൻ്റിയും പിന്തുണയും

Claber products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Claber webസൈറ്റ്.

For technical assistance, spare parts, or further inquiries, please contact Claber customer service. Keep your product model number (8410) and purchase details ready when contacting support.

Claber Official Webസൈറ്റ്: www.claber.com