1. ആമുഖം
This manual provides instructions for the proper installation and use of the BELL 00837 Electrical Box Cover. This product is designed to mount a single switch or receptacle within a 4-11/16 inch square electrical box. It is constructed from pre-galvanized steel and offers a 3.5 cubic inch capacity.
2 സുരക്ഷാ വിവരങ്ങൾ
WARNING: Risk of electric shock. Always turn off power at the circuit breaker or fuse box before installing or servicing any electrical components. If you are unsure about any part of these instructions, consult a qualified electrician.
- എല്ലാ പ്രാദേശിക, ദേശീയ വൈദ്യുത കോഡുകളും പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
- സുരക്ഷാ ഗ്ലാസുകൾ, ഇൻസുലേറ്റഡ് കയ്യുറകൾ എന്നിവ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
- Verify that the electrical box is properly grounded.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
3.1 ആവശ്യമായ ഉപകരണങ്ങൾ
- Screwdriver (appropriate for electrical box screws)
- വാല്യംtagഇ ടെസ്റ്റർ
3.2. പ്രീ-ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
- Turn off power to the electrical box at the main circuit breaker or fuse box.
- ഒരു വോള്യം ഉപയോഗിക്കുകtage tester to confirm that the power is off before proceeding.
- Ensure the existing electrical box is a 4-11/16 inch square box. This cover is designed specifically for this size.
3.3. Mounting the Cover
The BELL 00837 cover is designed to be mounted directly onto a 4-11/16 inch square electrical box, providing a raised surface for a single device.
- Align the mounting holes on the BELL 00837 cover with the screw holes on the 4-11/16 inch square electrical box.
- Secure the cover to the electrical box using appropriate screws (not included). Do not overtighten.
- Once the cover is securely attached, you can proceed to install your single switch or receptacle into the raised opening of the cover.
- Secure the switch or receptacle to the cover using the device mounting screws.
ചിത്രം 1: മുൻഭാഗം view of the BELL 00837 Electrical Box Cover, showing the raised opening for a single device and mounting holes.
ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the BELL 00837 Electrical Box Cover, highlighting the pre-galvanized steel construction and the 3.5 cubic inch capacity marking.
4. പരിപാലനം
The BELL 00837 Electrical Box Cover requires minimal maintenance. Periodically inspect the cover and the installed device for any signs of damage, corrosion, or loose connections. Ensure that the cover remains securely fastened to the electrical box. Do not paint over the cover as this may affect its electrical properties or UL listing.
5. പ്രശ്നപരിഹാരം
- Cover does not fit the electrical box: Verify that your electrical box is a 4-11/16 inch square box. This cover is not compatible with other sizes.
- Device does not fit the cover opening: Ensure you are attempting to install a standard single switch or receptacle. The cover is designed for a single device.
- Loose cover: Tighten mounting screws. If screws do not hold, inspect the electrical box for damaged threads.
6 സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | 00837 |
| ബ്രാൻഡ് | ബെൽ |
| മെറ്റീരിയൽ | പ്രീ-ഗാൽവാനൈസ്ഡ് സ്റ്റീൽ |
| നിറം | ചാരനിറം |
| അനുയോജ്യത | 4-11/16 inch square electrical boxes |
| ശേഷി | 3.5 cubic inches (cu. in.) |
| Device Accommodation | 1 single device (switch or receptacle) |
| സർട്ടിഫിക്കേഷനുകൾ | UL ലിസ്റ്റഡ്, CSA |
| ഇനത്തിൻ്റെ ഭാരം | 5.8 ഔൺസ് (0.36 പൗണ്ട്) |
| നിർമ്മാതാവ് | Hubbell Electrical Products |
7. വാറൻ്റി വിവരങ്ങൾ
This BELL 00837 Electrical Box Cover comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications. For warranty claims or further details, please contact the manufacturer.
8. പിന്തുണയും സമ്പർക്കവും
For technical assistance, product inquiries, or support, please contact Hubbell Electrical Products, the manufacturer of this device. Refer to the product packaging or the manufacturer's official webഏറ്റവും പുതിയ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.
Always provide the model number (00837) when seeking support.
