ഉൽപ്പന്നം കഴിഞ്ഞുview
The Kett KD-1495 Fiber Cement Shear is a powerful electric cutting tool designed for professional contractors, builders, and manufacturers. It provides efficient and clean cuts through various materials, including fiber cement, metal, plaster, and asphalt shingles, with minimal airborne dust.
Figure 1: The Kett KD-1495 Fiber Cement Shear, a robust electric tool for cutting various materials.
5.0 കൊണ്ട് സജ്ജീകരിച്ചിരിക്കുന്നു amp motor and A-2 tool steel blades, the KD-1495 offers a cutting speed of up to 2500 RPM, allowing for rapid completion of tasks. Its ergonomic design ensures comfortable operation and helps prevent ragged edges, leaving a thin waste strip.
സജ്ജീകരണവും തയ്യാറെടുപ്പും
1. അൺപാക്ക് ചെയ്യലും പരിശോധനയും
Carefully remove the Kett KD-1495 shear from its packaging. Inspect the tool for any signs of damage that may have occurred during shipping. Ensure all components, including the shear unit, power cord, and any included accessories (such as lubricant and wrenches), are present and in good condition. If any damage or missing parts are found, do not operate the tool and contact Kett customer support immediately.
2. പവർ കണക്ഷൻ
The KD-1495 operates on standard electrical power. Before plugging in the tool, ensure the power switch is in the "OFF" position. Connect the power cord to a grounded electrical outlet that matches the voltage requirements specified on the tool's label. Always use an extension cord that is rated for the tool's power requirements and is in good condition.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. പൊതു പ്രവർത്തനം
To start the shear, firmly grasp the handle and depress the trigger switch. The tool features variable speed control, allowing you to adjust the RPM up to 2500 to match the demands of your cutting task. Release the trigger to stop the tool.
Figure 2: The ergonomic design of the KD-1495 ensures comfortable handling and facilitates clean cuts with minimal airborne dust.
2. Cutting Various Materials
The KD-1495 is designed for versatility, capable of cutting:
- Fiber Cement: Up to 5/8" thick, including James Hardie Board. The shear gently cuts through the material, significantly reducing airborne dust compared to traditional methods.
- ലോഹം: Up to 18-gauge cold-rolled mild steel.
- പ്ലാസ്റ്റർ: Various thicknesses.
- Asphalt Shingles: For roofing and other applications.
Figure 3: The KD-1495 is capable of smooth cuts through fiber cement, metal, plaster, and asphalt shingles.
3. കട്ടിംഗ് ടെക്നിക്കുകൾ
For straight cuts, guide the shear along your marked line, maintaining steady pressure. The tool is designed to leave a thin waste strip, ensuring a clean edge. When cutting large sheets, especially fiber cement, it is recommended to support the piece being cut off to prevent premature breaking, as the material can be brittle. A common technique is to cut from both ends towards the center, supporting the loose piece as the cuts meet.
While primarily designed for straight cuts, the KD-1495 can make large radius curves. For intricate or sharp turns, multiple straight cuts or alternative tools may be required.
4. Safety Precautions During Operation
- സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ, ശ്രവണ സംരക്ഷണം എന്നിവയുൾപ്പെടെ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE) എപ്പോഴും ധരിക്കുക.
- നിങ്ങളുടെ ജോലിസ്ഥലം നല്ല വെളിച്ചമുള്ളതാണെന്നും തടസ്സങ്ങളൊന്നുമില്ലെന്നും ഉറപ്പാക്കുക.
- Secure the material being cut to prevent movement during operation.
- Keep hands and fingers away from the cutting blades.
- Operate the tool in a well-ventilated area, especially when cutting materials that may produce fine dust, even if minimal.
മെയിൻ്റനൻസ്
Regular maintenance ensures the longevity and optimal performance of your Kett KD-1495 shear.
1. ബ്ലേഡ് കെയർ
The KD-1495 utilizes durable A-2 tool steel blades. Periodically inspect the blades for wear, damage, or dullness. Worn blades can affect cutting performance and increase strain on the motor. Replacement blades are available from Kett Tool Company. Refer to the included manual for instructions on blade replacement, which may require specific tools (wrenches are included).
Figure 4: Key components of the KD-1495, including the durable A-2 Steel Blades and the long-lasting Aluminium Head.
2. വൃത്തിയാക്കൽ
After each use, especially when cutting dusty materials like fiber cement, clean the shear to remove any accumulated debris. Use a dry cloth or soft brush to wipe down the tool. Avoid using solvents or harsh chemicals that could damage the tool's finish or internal components. Ensure the ventilation openings on the motor housing are clear to prevent overheating.
3. ലൂബ്രിക്കേഷൻ
A tube of lubricant is included with your KD-1495. Apply lubricant to the moving parts of the shear head as recommended in the detailed product manual to ensure smooth operation and reduce wear. Follow the specific lubrication points and frequency outlined in the manual.
4. സംഭരണം
Store the KD-1495 in a clean, dry place, away from direct sunlight and extreme temperatures. Protect the blades from damage during storage. While a dedicated storage case is not included, consider a suitable container to protect the tool and keep accessories organized.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues you might encounter with your Kett KD-1495 shear.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഉപകരണം ആരംഭിക്കുന്നില്ല. | No power supply; power cord damaged; trigger switch faulty. | പവർ ഔട്ട്ലെറ്റും കേബിളും പരിശോധിക്കുക. സ്വിച്ച് പൂർണ്ണമായും ഇടുങ്ങിയതാണെന്ന് ഉറപ്പാക്കുക. പ്രശ്നം നിലനിൽക്കുകയാണെങ്കിൽ, പ്രൊഫഷണൽ സേവനം തേടുക. |
| Poor cutting performance or ragged edges. | Dull or damaged blades; incorrect cutting technique; material too thick. | Inspect and replace blades if necessary. Review operating instructions for proper technique. Ensure material is within specified thickness limits (e.g., 5/8" fiber cement, 18-gauge metal). |
| Tool jumps or vibrates excessively. | Improper material support; dull blades; material type. | Ensure material is securely supported, especially the off-cut piece. Check blade sharpness. Some materials may require a specific approach. |
| ഓപ്പറേഷൻ സമയത്ത് അമിത ചൂടാക്കൽ. | അടഞ്ഞ വെന്റിലേഷൻ സ്ലോട്ടുകൾ; തുടർച്ചയായ കനത്ത ഉപയോഗം. | Clear any debris from ventilation slots. Allow the tool to cool down during prolonged use. |
For issues not listed here or if solutions do not resolve the problem, contact Kett Tool Company customer support.
സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Kett KD-1495 Fiber Cement Shear:
- മോഡൽ നമ്പർ: കെഡി-1495
- ബ്രാൻഡ്: കെട്ട്
- നിറം: ചാരനിറം
- മെറ്റീരിയൽ: A-2 Tool Steel (Blades), Metal/Steel (Handle)
- ശൈലി: Fiber Cement Shear
- ഊർജ്ജ സ്രോതസ്സ്: കോർഡഡ് ഇലക്ട്രിക്
- മോട്ടോർ: 5.0 Amp
- ആർപിഎം: 2500 ആർപിഎം വരെ (വേരിയബിൾ സ്പീഡ്)
- കട്ടിംഗ് ശേഷി:
- Fiber Cement: Up to 5/8" thick
- Metal: Up to 18-gauge cold-rolled mild steel
- Plaster, Asphalt Shingles
- ഇനത്തിൻ്റെ ഭാരം: 4.5 പൗണ്ട്
- ഉൽപ്പന്ന അളവുകൾ: 15.8 x 9 x 3.6 ഇഞ്ച്
- ബ്ലേഡ് എഡ്ജ്: ഋജുവായത്
- ഫിനിഷ് തരം: പൊടി പൂശി
- കൈ ഓറിയൻ്റേഷൻ: ഉഭയകക്ഷി
- UPC: 014848521955
- നിർമ്മാതാവ്: കെട്ട്
- ആദ്യം ലഭ്യമായ തീയതി: ഫെബ്രുവരി 17, 2010
വാറൻ്റി വിവരങ്ങൾ
The Kett KD-1495 Fiber Cement Shear comes with a 1 വർഷത്തെ പരിമിത വാറൻ്റി from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to make a warranty claim, please refer to the official warranty documentation provided with your product or contact Kett Tool Company directly.
ഉപഭോക്തൃ പിന്തുണ
For any questions, technical assistance, or service requests regarding your Kett KD-1495 Fiber Cement Shear, please contact Kett Tool Company customer support. You can find more information and contact details on the official Kett Tool Company webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ആമസോൺ ബ്രാൻഡ് സ്റ്റോർ വഴി:
