TELL MANUFACTURING, INC. Commercial Grade 1 Door Closer, Model MQ008, Size 4 Instruction Manual

ആമുഖം

This instruction manual provides essential information for the proper installation, adjustment, and maintenance of your TELL MANUFACTURING, INC. Commercial Grade 1 Door Closer, Model MQ008, Size 4. Please read these instructions thoroughly before beginning installation to ensure safe and correct operation. Retain this manual for future reference.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Tell Commercial Grade 1 Door Closer is designed for reliable and controlled closing of commercial doors. It is a non-handed unit, suitable for various mounting configurations, and built to meet high industry standards for durability and performance.

ചിത്രം 1: Tell Commercial Grade 1 Door Closer, Model MQ008. This image displays the silver-colored cast aluminum body with an adjustable arm and spring mechanism. The arm is designed for various mounting applications, including regular, top jamb, and parallel arm installations. The closer is engineered for durability and smooth door operation.

പ്രധാന സവിശേഷതകൾ:

• Commercial Grade 1: Engineered for high-traffic commercial environments.
• ANSI A 156.4, 300 Series, Grade 3: Certified for 500,000 cycles, ensuring long-term performance.
• UL ലിസ്റ്റുചെയ്തത്: Meets safety and performance standards.
• കൈകൊണ്ട് നിർമ്മിക്കാത്ത ഡിസൈൻ: Versatile for regular, top jamb, or parallel arm mounting.
• Adjustable Closing Speed: Allows for precise control over door closing.
• നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Made from cast aluminum with an aluminum finish.

സുരക്ഷാ വിവരങ്ങൾ

• Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, during installation.
• Ensure the door is securely propped open or removed from its hinges before beginning installation to prevent accidental movement.
• Do not attempt to disassemble the closer body, as it contains pressurized components.
• Follow all local building codes and regulations for door closer installation.
• ഇൻസ്റ്റലേഷൻ പ്രക്രിയയുടെ ഏതെങ്കിലും ഭാഗത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു പ്രൊഫഷണലിനെ സമീപിക്കുക.

പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

• Door Closer Body (1)
• Main Arm Assembly (1)
• Parallel Arm Bracket (if applicable for parallel arm mounting) (1)
• Mounting Screws and Fasteners (Set)
• Instruction Template (1)

ഇൻസ്റ്റാളേഷൻ (സജ്ജീകരണം)

The Tell Commercial Grade 1 Door Closer can be installed in three common configurations: Regular Arm (Pull Side), Top Jamb (Push Side), and Parallel Arm (Push Side). Refer to the included template for precise drilling locations and specific instructions for your chosen mounting type.

പൊതുവായ ഘട്ടങ്ങൾ:

1. വാതിലും ഫ്രെയിമും തയ്യാറാക്കുക: Ensure the mounting surfaces are clean, flat, and structurally sound.
2. ടെംപ്ലേറ്റ് സ്ഥാപിക്കുക: Affix the provided paper template to the door and/or frame according to your desired mounting configuration.
3. ഡ്രിൽ പൈലറ്റ് ദ്വാരങ്ങൾ: Using the template, drill pilot holes for the closer body and arm bracket. The door preparation requires 9-1/16" horizontal and 3/4" vertical mounting hole locations.
4. ക്ലോസർ ബോഡി മൌണ്ട് ചെയ്യുക: Secure the closer body to the door or frame using the provided screws.
5. Attach the Main Arm: Connect the main arm to the closer spindle.
6. Install the Arm Bracket: Secure the arm bracket to the frame or door, depending on the mounting type.
7. Connect the Arm Assembly: Connect the main arm to the arm bracket, ensuring proper alignment.
8. പ്രാരംഭ ക്രമീകരണം: Perform initial adjustments as described in the "Operation and Adjustment" section.

കുറിപ്പ്: The door closer is non-handed, meaning it can be installed on either left-hand or right-hand doors without modification. The door range is up to 180 degrees, depending on the installation type and door frame clearance.

പ്രവർത്തനവും ക്രമീകരണവും

The door closer features adjustable valves to control the closing speed and latching action. These adjustments are crucial for optimal performance and safety.

Adjustment Valves:

• Closing Speed Valve: Controls the speed of the door from its fully open position until approximately 10-15 degrees from the closed position.
• Latching Speed Valve: Controls the speed of the door for the final 10-15 degrees of closing, ensuring the door latches securely.

അഡ്ജസ്റ്റ്മെന്റ് നടപടിക്രമം:

1. Use a flathead screwdriver to turn the adjustment valves.
2. Turn the valve ഘടികാരദിശയിൽ വരെ കുറയുന്നു the speed (slower).
3. Turn the valve എതിർ ഘടികാരദിശയിൽ വരെ വർധിപ്പിക്കുക the speed (faster).
4. Make small adjustments (quarter-turns) and test the door's closing action after each adjustment.
5. Ensure the door closes smoothly and latches without slamming or leaving the door ajar.

ജാഗ്രത: Do not turn the valves more than two full turns counter-clockwise from the factory-set position, as this may cause fluid leakage and damage the closer.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and optimal performance of your door closer.

• ആനുകാലിക പരിശോധന: Annually inspect the closer body, arm assembly, and mounting screws for any signs of wear, damage, or looseness.
• ഫാസ്റ്റനറുകൾ ശക്തമാക്കുക: If any screws or fasteners are loose, tighten them immediately.
• യൂണിറ്റ് വൃത്തിയാക്കുക: Wipe down the closer body and arm with a soft, damp പൊടിയും അഴുക്കും നീക്കം ചെയ്യാൻ തുണി ഉപയോഗിക്കുക. ഉരച്ചിലുകൾ ഉള്ള ക്ലീനറുകൾ ഒഴിവാക്കുക.
• ചോർച്ച പരിശോധിക്കുക: Inspect the closer body for any signs of fluid leakage. A leaking closer indicates internal damage and requires replacement.
• Re-adjust as Needed: Over time, environmental factors or heavy use may require minor re-adjustment of the closing and latching speeds.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

This TELL MANUFACTURING, INC. door closer is backed by a 10 വർഷത്തെ പരിമിത വാറൻ്റി by the manufacturer. This warranty covers defects in materials and workmanship under normal use and service.

For warranty claims, technical assistance, or further support, please contact Tell Manufacturing, Inc. customer service. Refer to the product packaging or the manufacturer's official webനിലവിലെ ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കായി സൈറ്റ്.