ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your Westbrass Tip Toe Schedule 40 ABS Plumber's Pack. Please read this manual thoroughly before beginning installation to ensure proper function and longevity of the product. This plumber's pack is designed for use in bathtub drain assemblies.
സുരക്ഷാ വിവരങ്ങൾ
Always turn off the main water supply before attempting any plumbing installation or repair. Wear appropriate personal protective equipment, such as safety glasses and gloves. If you are unsure about any step, consult a qualified plumber.
പാക്കേജ് ഉള്ളടക്കം
താഴെ പട്ടികപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- 1-1/2 inch Schedule 40 ABS Plumber's Pack Assembly
- Tip Toe Bathtub Drain Plug (D3322)
- Two-Hole Overflow Faceplate with two (2) 1/4 inch-20 x 1-1/2 inch plated brass screws (D329)
- ABS Top Elbow
- ABS Shoe Elbow
കുറിപ്പ്: Tubing and tee are not included in this plumber's pack.
ചിത്രം 1: കഴിഞ്ഞുview of the Westbrass Tip Toe Plumber's Pack components. Shown are the ABS top elbow, ABS shoe elbow, two-hole overflow faceplate, and the tip-toe style drain plug.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This section outlines the general steps for installing the Westbrass Tip Toe Plumber's Pack. Specific plumbing configurations may vary. It is recommended to consult a professional plumber if you are unfamiliar with bathtub drain installations.
1. Determine Bath Shoe Size
Before installation, it is important to determine if your existing bath shoe or new plumbing requires a coarse thread (1-1/2 in. NPSM) or fine thread (1-1/4 in. NPSM) drain. This product is a 1-1/2 inch coarse thread drain.
Image 2: Guide for determining the size of your bath shoe, illustrating coarse thread (1-7/8 inch diameter, 1-1/2 inch NPSM) and fine thread (1-5/8 inch diameter, 1-1/4 inch NPSM) measurements.
2. Assemble Overflow and Shoe Elbows
Connect the ABS top elbow and shoe elbow using appropriate ABS cement and following local plumbing codes. Ensure a secure, watertight seal. The overflow faceplate will attach to the top elbow.
Image 3: The ABS top elbow shown with the white two-hole overflow faceplate secured by screws, ready for installation into the bathtub overflow opening.
3. ഡ്രെയിൻ അസംബ്ലി ഇൻസ്റ്റാൾ ചെയ്യുക
Apply plumber's putty or a silicone sealant around the underside of the drain flange. Insert the tip-toe drain assembly into the bathtub drain opening from above. From below, thread the shoe elbow onto the drain assembly, tightening it securely to create a watertight seal. Ensure gaskets are properly seated.
4. Connect to Waste Line
Connect the assembled overflow and shoe elbows to your existing or new waste line plumbing. This typically involves additional ABS piping and a tee connection, which are not included in this pack. Test for leaks by filling the tub with water and observing all connections.
ഓപ്പറേഷൻ
The Westbrass Tip Toe Bathtub Drain features a simple push-to-open and push-to-close mechanism.
- To close the drain and retain water in the tub, press down firmly on the center of the drain stopper. It will click into the closed position.
- To open the drain and allow water to flow out, press down firmly on the center of the drain stopper again. It will click into the open position.
ചിത്രം 4: മുകളിൽ view of the tip-toe drain stopper, showing the 'PUSH' indicator for operation.
മെയിൻ്റനൻസ്
Regular cleaning will help maintain the appearance and function of your Westbrass drain assembly. Use a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive scrubbing pads, as these can damage the finish.
Periodically check the drain stopper for hair or debris accumulation. The stopper can typically be removed by unscrewing it counter-clockwise for cleaning. Ensure all gaskets are properly seated upon reassembly.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Westbrass Tip Toe Plumber's Pack, refer to the common troubleshooting steps below.
Leaking Tip-Toe Bathtub Drains
If your tip-toe drain is leaking, it may be due to the tip-toe washer not engaging correctly with the stopper, allowing water to pass. Follow these steps to resolve the issue:
- Remove the cap from the drain or the cartridge from the drain body.
- Fully open the drain and remove the cover cap.
- Tighten the screw inside the drain stopper using a screwdriver.
- Reinstall the drain and cover, ensuring all components are properly aligned and secured.
Image 5: Troubleshooting steps for a leaking tip-toe bathtub drain, illustrating how to access and tighten the internal screw to ensure proper sealing.
കൂടുതൽ സഹായത്തിന്, ദയവായി ഔദ്യോഗിക വിലാസം സന്ദർശിക്കുക. ട്രബിൾഷൂട്ടിംഗ് ഗൈഡ് (PDF).
സ്പെസിഫിക്കേഷനുകൾ
| മെറ്റീരിയൽ | അക്രിലോണിട്രൈൽ ബ്യൂട്ടാഡീൻ സ്റ്റൈറീൻ, ലോഹം |
| ബ്രാൻഡ് | വെസ്റ്റ്ബ്രാസ് |
| നിറം | Powder Coat White |
| ഇനത്തിൻ്റെ ഭാരം | 1 പൗണ്ട് |
| യു.പി.സി | 747028039550 |
| മോഡൽ നമ്പർ | D534-50 |
| ഉൽപ്പന്ന അളവുകൾ | 6 x 4 x 4 ഇഞ്ച് |
| ഇൻസ്റ്റലേഷൻ രീതി | സ്ക്രൂഡ്രൈവർ |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | (1) - Plumber's Pack Bathtub Drain Kit |
Image 6: Technical diagram providing detailed dimensions and specifications for the D534 Tip-Toe Plumber's Pack components, including the coarse thread drain and overflow faceplate.
വാറൻ്റി വിവരങ്ങൾ
This Westbrass product comes with a 1 വർഷത്തെ പരിമിത വാറൻ്റി. For specific terms and conditions, please contact Westbrass customer service or refer to the warranty documentation included with your purchase.
ഉപഭോക്തൃ പിന്തുണ
For technical assistance, replacement parts, or any questions regarding your Westbrass product, please visit the official Westbrass webസൈറ്റിൽ നൽകുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. കോൺടാക്റ്റ് വിവരങ്ങൾ സാധാരണയായി ഉൽപ്പന്ന പാക്കേജിംഗിലോ നിർമ്മാതാവിന്റെയോ webസൈറ്റ്.
നിങ്ങൾക്ക് സന്ദർശിക്കാനും കഴിയും ആമസോണിലെ വെസ്റ്റ്ബ്രാസ് സ്റ്റോർ കൂടുതൽ ഉൽപ്പന്ന വിവരങ്ങൾക്ക്.
