Cherub WMT-555C

Cherub WMT-555C Tuner and Metronome with Pickup User Manual

Model: WMT-555C | Brand: Cherub

ആമുഖം

The Cherub WMT-555C is a versatile electronic device designed for musicians, combining a chromatic tuner and a digital metronome into a single, portable unit. It is suitable for a wide range of instruments, including guitars and orchestral instruments, and features a clip-on pickup for accurate acoustic instrument tuning.

This manual provides detailed instructions for the setup, operation, and maintenance of your WMT-555C to ensure optimal performance and longevity.

ഉൽപ്പന്നം കഴിഞ്ഞുview

Cherub WMT-555C Tuner and Metronome with Pickup, showing the device and its clip-on pickup cable.

Image: Cherub WMT-555C Tuner and Metronome with Pickup. The device features a large LCD screen, control buttons, a speaker, and input jacks. Below it is the clip-on pickup with a 1/4" jack.

The WMT-555C unit includes:

Key Controls and Display Elements (Refer to image above):

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The WMT-555C requires 1 AAA battery for operation. Ensure the battery is inserted with the correct polarity as indicated inside the battery compartment. A fresh alkaline battery is recommended for optimal performance and battery life.

2. പവർ ഓൺ/ഓഫ്

അമർത്തുക ഓൺ / ഓഫ് button to power the unit on. Press and hold the ഓൺ / ഓഫ് button again to power it off.

3. Connecting the Pickup (Optional)

For tuning acoustic instruments, connect the provided clip-on pickup to the ഇൻപുട്ട് jack on the side of the unit. Attach the clip securely to your instrument, typically near the bridge or soundboard, to best capture vibrations.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ട്യൂണർ മോഡ്

  1. Select Tuner Mode: അമർത്തുക മോഡ് button until "Tuner" is displayed on the screen.
  2. ഇൻപുട്ട് രീതി:
    • ആന്തരിക മൈക്രോഫോൺ: For acoustic instruments, ensure no cable is plugged into the INPUT jack. The built-in MIC will detect sound.
    • Pickup/Instrument Cable: Plug the clip-on pickup or your instrument's 1/4" cable into the ഇൻപുട്ട് ജാക്ക്.
  3. നിങ്ങളുടെ ഉപകരണം ട്യൂൺ ചെയ്യുക: Play a single note on your instrument. The display will show the detected note and indicate whether it is sharp, flat, or in tune. Adjust your instrument's tuning pegs until the display indicates the note is in tune.
  4. പ്രധാന തിരഞ്ഞെടുപ്പ്: The tuner supports chromatic tuning in 4 keys: C, F, B♭, and E♭. Use the ഇനം button to cycle through these key options if needed.
  5. Pitch Calibration: The reference pitch can be calibrated from 435Hz to 445Hz. Use the പിച്ച് buttons to adjust the A4 reference frequency. The default is typically 440Hz.
  6. ടോൺ ജനറേറ്റർ: അമർത്തുക ശബ്ദം button to activate the built-in tone generator, which produces a reference tone for manual tuning.

മെട്രോനോം മോഡ്

  1. Select Metronome Mode: അമർത്തുക മോഡ് button until "Metronome" is displayed on the screen.
  2. ടെമ്പോ ക്രമീകരിക്കുക: ഉപയോഗിക്കുക ടെമ്പോ buttons (Up/Down) to set the desired beats per minute (BPM). The range is 30-230 BPM.
  3. Set Time Signature: അമർത്തുക ഇനം button to select the time signature setting. Use the മൂല്യം buttons to choose from available time signatures: -/4 (0), 1/4, 2/4, 3/4, 4/4, 3/8, 6/8.
  4. താളം തിരഞ്ഞെടുക്കുക: അമർത്തുക അടിക്കുക button to cycle through various rhythm patterns (e.g., quarter notes, eighth notes, triplets).
  5. Start/Stop Metronome: അമർത്തുക PLAY Metronome button to start the metronome click. Press it again to stop.
  6. വോളിയം ക്രമീകരിക്കുക: ഉപയോഗിക്കുക വാല്യം. slider to adjust the metronome's output volume.

മെയിൻ്റനൻസ്

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
യൂണിറ്റ് പവർ ഓണാക്കുന്നില്ല.ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്ത ബാറ്ററി.ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കിക്കൊണ്ട് AAA ബാറ്ററി മാറ്റിസ്ഥാപിക്കുക.
Tuner is not detecting sound.Incorrect input method selected; low instrument volume; faulty pickup/cable.Ensure pickup is securely connected or use the built-in MIC. Increase instrument volume. Check pickup/cable for damage.
Metronome sound is too quiet.Volume slider set too low; speaker obstruction.ക്രമീകരിക്കുക വാല്യം. slider to increase output. Ensure the speaker grille is clear. Consider using headphones.
Tuner response is slow.Weak signal from instrument; noisy environment.Ensure a clear, sustained note is played. Use the clip-on pickup in noisy environments.

സ്പെസിഫിക്കേഷനുകൾ

അനുബന്ധ രേഖകൾ - WMT-555C

പ്രീview ചെറൂബ് WMT-565C സ്ട്രിംഗ് ഇൻസ്ട്രുമെന്റ് മേറ്റ്: ട്യൂണർ, മെട്രോനോം, ഈർപ്പം/താപനില മോണിറ്റർ ഉപയോക്തൃ മാനുവൽ
മൾട്ടി-ഫങ്ഷണൽ സംഗീത ഉപകരണ ആക്സസറിയായ ചെറൂബ് WMT-565C-യുടെ വിശദമായ ഉപയോക്തൃ മാനുവൽ. അതിന്റെ ട്യൂണർ, മെട്രോനോം, താപനില/ഈർപ്പ സെൻസർ, മറ്റ് സവിശേഷതകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview Cherub WMT-248 പോർട്ടബിൾ മെട്രോ-ട്യൂണർ ഉപയോക്തൃ മാനുവൽ
Cherub WMT-248 പോർട്ടബിൾ മെട്രോ-ട്യൂണറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, അതിന്റെ സവിശേഷതകൾ, പ്രവർത്തനം, സ്പെസിഫിക്കേഷനുകൾ, അറ്റകുറ്റപ്പണികൾ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview ചെറൂബ് WMT-565C സ്ട്രിംഗ് ഇൻസ്ട്രുമെന്റ് മേറ്റ്: ഉപയോക്തൃ മാനുവലും ഗൈഡും
ട്യൂണർ, മെട്രോനോം, താപനില, ഈർപ്പം മോണിറ്റർ എന്നിവ ഉൾക്കൊള്ളുന്ന ചെറൂബ് WMT-565C സ്ട്രിംഗ് ഇൻസ്ട്രുമെന്റ് മേറ്റിനായുള്ള സമഗ്ര ഉപയോക്തൃ മാനുവൽ. അതിന്റെ സവിശേഷതകൾ, പ്രവർത്തനം, സവിശേഷതകൾ, മുൻകരുതലുകൾ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview Cherub WST-905Li മെറ്റൽ ക്ലിപ്പ്-ഓൺ ട്യൂണർ ഉപയോക്തൃ മാനുവൽ
Cherub WST-905Li ക്ലിപ്പ്-ഓൺ ട്യൂണറിനായുള്ള ഔദ്യോഗിക ഉപയോക്തൃ മാനുവൽ. അതിന്റെ സവിശേഷതകൾ, പ്രവർത്തനം, ഗിറ്റാർ നഷ്ടപരിഹാര ട്യൂണിംഗ്, സ്പെസിഫിക്കേഷനുകൾ, FCC പാലിക്കൽ എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview Cherub WST-680 റീചാർജ് ചെയ്യാവുന്ന ഓട്ടോ-ഓൺ ട്യൂണർ ഉപയോക്തൃ മാനുവൽ
Cherub WST-680 റീചാർജ് ചെയ്യാവുന്ന ഓട്ടോ-ഓൺ ട്യൂണറിനായുള്ള സമഗ്രമായ ഉപയോക്തൃ മാനുവൽ, സവിശേഷതകൾ, പ്രവർത്തനം, സ്പെസിഫിക്കേഷനുകൾ, മുൻകരുതലുകൾ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview ചെറൂബ് ഓട്ടോ-ഓൺ ക്ലിപ്പ് WST-645 ഉപയോക്തൃ മാനുവൽ
ഗിറ്റാർ, ബാസ്, യുകുലേലെ എന്നിവയ്‌ക്കായുള്ള റീചാർജ് ചെയ്യാവുന്ന ക്ലിപ്പ്-ഓൺ ഇലക്ട്രോണിക് ട്യൂണറായ ചെറൂബ് ഓട്ടോ-ഓൺ ക്ലിപ്പ് WST-645-നുള്ള ഉപയോക്തൃ മാനുവൽ, ഓട്ടോ-ഓൺ ഫംഗ്‌ഷൻ, നഷ്ടപരിഹാര ട്യൂണിംഗ്, USB-C ചാർജിംഗ് എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.