Definitive Technology BP-9080x Bipolar Tower Speaker Instruction Manual

1. ആമുഖം

The Definitive Technology BP-9080x is a high-performance bipolar tower speaker designed to deliver immersive, room-filling sound. It features a Forward Focused Bipolar Array, aluminum dome tweeters, high-performance drivers, an integrated powered subwoofer, and Intelligent Bass Control. This manual provides essential information for the proper setup, operation, and maintenance of your BP-9080x speaker.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• Forward Focused Bipolar Array: ശബ്ദങ്ങൾ വികസിപ്പിക്കുന്നു.tage for a wider, more immersive listening experience.
• Integrated Powered 12" Subwoofer: Provides deep, impactful bass without the need for a separate subwoofer.
• Intelligent Bass Control: Enhances bass while maintaining tonal balance between lows and mids for clear sound.
• Integrated Top-Firing Height Speaker Module: Seamlessly integrated two-way speaker module (1" tweeter and 5.25" midrange driver) for multi-dimensional sound (Dolby Atmos and DTS:X expandable).
• ഡ്രൈവർ കോൺഫിഗറേഷൻ: Features BDSS technology drivers on front and rear arrays, including a front 1" tweeter and (2) 5.25" mid drivers, and a rear-facing 1" tweeter and 5.25" mid driver.
• Dual Bass Radiators: Complement the integrated subwoofer for enhanced low-frequency reproduction.

3. പായ്ക്ക് ചെയ്യലും ഉള്ളടക്കവും

Carefully remove the speaker from its packaging. Retain all packaging materials for future transport or service. The box should contain:

• Definitive Technology BP-9080x Tower Speaker
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)
• പവർ കോർഡ്
• Base Spikes (for carpeted surfaces)
• Floor Glides (for hard surfaces)

Image 1: The Definitive Technology BP-9080x Bipolar Tower Speaker.

4. സജ്ജീകരണവും സ്ഥാനവും

4.1 അടിസ്ഥാനം അറ്റാച്ചുചെയ്യുന്നു

The speaker base provides stability. Attach it securely using the provided hardware. For carpeted floors, install the base spikes. For hard floors, use the floor glides to prevent scratching and improve stability.

Image 2: Speaker base with adjustable carpet spikes installed.

Image 3: Speaker base with floor glides installed for hard surfaces.

4.2 സ്പീക്കർ പ്ലേസ്മെന്റ്

For optimal sound performance, place the BP-9080x speakers equidistant from your primary listening position. The bipolar design creates a wide soundstage, so precise toe-in is less critical than with conventional speakers, but experimentation is encouraged. Ensure adequate space around the speakers for proper air circulation, especially for the integrated subwoofer.

ചിത്രം 4: ഉദാample home theater setup demonstrating speaker placement.

4.3 കണക്ഷനുകൾ

Connect your audio receiver or amplifier to the speaker terminals. The BP-9080x includes an integrated powered subwoofer, which requires a separate power connection. Ensure the power cord is securely plugged into the speaker and a wall outlet. For the optional Dolby Atmos/DTS:X height module, connect it to the appropriate height channels on your A/V receiver.

5. ഓപ്പറേഷൻ

Once connected and powered on, the BP-9080x speakers are ready for use. Adjust the volume and sound settings on your receiver or amplifier to your preference. The Intelligent Bass Control feature allows for fine-tuning of the subwoofer output to seamlessly blend with the main speaker drivers, providing balanced audio reproduction.

5.1 Intelligent Bass Control

The Intelligent Bass Control knob, typically located on the rear of the speaker or the integrated subwoofer module, allows you to adjust the subwoofer's output level. This feature helps integrate the powerful bass with the midrange and high frequencies, ensuring a cohesive and natural sound profile. Start with a moderate setting and adjust based on your room acoustics and personal listening preferences.

6. പരിപാലനം

To maintain the appearance and performance of your BP-9080x speakers:

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to wipe down the speaker cabinet and grille. Avoid abrasive cleaners or solvents.
• ഗ്രിൽ കെയർ: The speaker grille is designed to protect the drivers. Avoid pressing on it or exposing it to sharp objects.
• വെൻ്റിലേഷൻ: Ensure the integrated subwoofer's amplifier has adequate ventilation. Do not block the vents.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity.

7. പ്രശ്‌നപരിഹാരം

If you experience issues with your BP-9080x speakers, refer to the following common troubleshooting steps:

• ശബ്ദമില്ല:
  • Check all audio connections between the speaker and your receiver/ampജീവൻ.
  • Ensure the speaker's power cord is securely plugged in and the speaker is powered on.
  • Verify that your receiver/amplifier is set to the correct input source and volume is not muted.
• വികലമായ ശബ്ദം:
  • Reduce the volume on your receiver/ampജീവൻ.
  • സ്പീക്കർ വയർ കണക്ഷനുകളിൽ അയഞ്ഞ സ്ട്രോണ്ടുകളോ ഷോർട്ട് സർക്യൂട്ടുകളോ ഉണ്ടോ എന്ന് പരിശോധിക്കുക.
  • Ensure the Intelligent Bass Control is not set too high, causing over-excursion of the subwoofer.
• ദുർബലമായ ബാസ്:
  • Increase the Intelligent Bass Control setting.
  • Verify the subwoofer's power is on.
  • Check the subwoofer LFE/RCA connection from your receiver to the speaker.

If problems persist, consult the Definitive Technology support webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ സേവനവുമായി ബന്ധപ്പെടുക.

8 സ്പെസിഫിക്കേഷനുകൾ

Image 5: Diagram showing the dimensions of the BP-9080x speaker (51.5" H, 16" D, 12" W).

ചിത്രം 6: ഒരു ആന്തരിക view illustrating the various drivers and the integrated subwoofer within the BP-9080x speaker cabinet.

ചിത്രം 7: മുകളിൽ view of the BP-9080x speaker, highlighting the integrated height module for Dolby Atmos/DTS:X compatibility.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the official Definitive Technology website or contact their customer service department. Please note that returns may be subject to specific policies due to the size and weight of the product, as indicated by the manufacturer.

കൂടുതൽ സഹായത്തിന്, സന്ദർശിക്കുക Definitive Technology Store on Amazon.