ആമുഖം
The Brodit ProClip is a custom-fit mounting bracket designed for vehicle dashboards. It provides a secure and stable platform for attaching various device holders, such as those for mobile phones, PDAs, or hands-free kits. This bracket ensures that your device is always within easy reach and view, enhancing safety and convenience while driving. The ProClip is vehicle-specific, ensuring a precise fit for the Volkswagen Sharan 11 model, and is engineered for straightforward installation without requiring specialized tools or dashboard disassembly.
സുരക്ഷാ വിവരങ്ങൾ
- Ensure the ProClip is securely installed before attaching any device holder or device.
- Do not obstruct airbags, vehicle controls, or your line of sight with the installed bracket or attached device.
- Always prioritize safe driving. Avoid operating your device while the vehicle is in motion.
- Periodically check the bracket's stability and tightness.
പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- Brodit 804564 ProClip Console Mounting Bracket
- വിശദമായ ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
The installation process is quick and does not require special tools or modifications to your vehicle's interior. Follow these steps carefully:
Step 1: Identify Installation Area
Refer to the diagram to locate the precise installation point for the ProClip. It is designed to fit on the left side of the dashboard, adjacent to the A-pillar, providing optimal visibility and access.
Step 2: Prepare the Dashboard Trim
Carefully pull back the rubber trim along the A-pillar to expose the edge of the dashboard where the ProClip will be inserted. This creates the necessary gap for the bracket's lower edge.
Step 3: Insert the Lower Part of the ProClip
Insert the lower, curved edge of the ProClip into the gap between the dashboard and the A-pillar trim. Ensure it slides in smoothly and is seated firmly.
Step 4: Secure the Upper Part of the ProClip
Once the lower part is in place, gently but firmly press the upper part of the ProClip into the seam of the dashboard. The bracket is designed to clip into place without damaging the vehicle's interior. Some models may include adhesive strips for additional security; if present, remove the backing and press firmly.
ഘട്ടം 5: ഇൻസ്റ്റാളേഷൻ പരിശോധിക്കുക
After installation, ensure the ProClip is stable and does not move. The bracket should be firmly attached to the dashboard. You can now attach your desired device holder (sold separately) to the flat surface of the ProClip.
Operating the ProClip
The Brodit ProClip serves as a base for various device holders. Once installed, you can attach any compatible Brodit device holder directly to the flat mounting surface of the ProClip. These holders typically secure with screws or a quick-release mechanism, providing a stable and accessible location for your smartphone, GPS, or other portable electronic devices.
മെയിൻ്റനൻസ്
The Brodit ProClip is constructed from durable black ABS plastic and requires minimal maintenance.
- വൃത്തിയാക്കൽ: Wipe the bracket with a soft, damp തുണി. കഠിനമായ രാസവസ്തുക്കളോ അബ്രാസീവ് ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക, കാരണം ഇവ പ്ലാസ്റ്റിക് ഫിനിഷിന് കേടുവരുത്തും.
- പരിശോധന: Periodically check the bracket for any signs of wear or loosening. Ensure it remains securely fastened to the dashboard.
ട്രബിൾഷൂട്ടിംഗ്
- ബ്രാക്കറ്റ് അയഞ്ഞതായി തോന്നുന്നു: Re-check the installation steps, ensuring both the lower and upper parts of the ProClip are fully engaged with the dashboard seams. Apply firm pressure during installation.
- Difficulty inserting the bracket: Ensure you are pulling back the trim sufficiently and aligning the ProClip correctly with the vehicle's specific dashboard contours. Do not force the bracket, as this may cause damage.
- ഉപകരണ ഹോൾഡർ അറ്റാച്ചുചെയ്യുന്നില്ല: Verify that your device holder is compatible with the Brodit ProClip system and that any screws or attachment mechanisms are properly aligned and tightened.
സ്പെസിഫിക്കേഷനുകൾ
| മോഡൽ നമ്പർ | 804564 |
| ബ്രാൻഡ് | ബ്രോഡിറ്റ് |
| ഉൽപ്പന്ന അളവുകൾ | 3.9 x 3.82 x 2.28 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 2.46 ഔൺസ് |
| മെറ്റീരിയൽ | കറുത്ത എബിഎസ് പ്ലാസ്റ്റിക് |
| മൗണ്ടിംഗ് തരം | ഡാഷ്ബോർഡ് |
| അനുയോജ്യമായ ഉപകരണങ്ങൾ | Smartphones (with compatible holder) |
വാറൻ്റിയും പിന്തുണയും
For specific warranty information and customer support, please refer to the official Brodit website or contact your authorized Brodit retailer. Keep your purchase receipt as proof of purchase for any warranty claims.
