STOVES Replacement Fan Oven Heating Element Instruction Manual

1. ആമുഖം

This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of your replacement fan oven heating element. This component is designed to restore the heating function of compatible electric fan ovens. Please read this manual thoroughly before attempting any installation or repair.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Electrical work can be hazardous. Always ensure the appliance is completely disconnected from the main power supply before commencing any installation, maintenance, or repair work. Failure to do so can result in electric shock, serious injury, or death.

• Only qualified personnel or competent individuals should attempt to install or replace this heating element.
• Wear appropriate personal protective equipment, including insulated gloves, if necessary.
• Verify that the replacement element matches the specifications of the original part.
• Ensure all connections are secure and correctly insulated after installation.
• Do not operate the oven if the element appears damaged or improperly installed.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

This product is a circular fan oven heating element, an essential component for electric fan ovens. It is responsible for generating the heat required for cooking. The element is typically located at the rear of the oven cavity, surrounding the fan motor.

ചിത്രം 1: Circular fan oven heating element. This image displays the circular fan oven heating element. It features a coiled metal tube forming a circle, with two electrical terminals extending from a central mounting bracket. This component is designed to generate heat within the oven cavity.

4 അനുയോജ്യത

This replacement fan oven heating element is compatible with a wide range of models from various brands, including Hygena, Belling, Stoves, Diplomat, New World, and Whirlpool cookers. Please verify your appliance's model number against the list below to ensure compatibility. This list is not exhaustive, and cross-referencing with your original part or appliance manual is recommended.

അനുയോജ്യമായ ബ്രാൻഡുകളും മോഡലുകളും:

• Belling: 427 Wh, 654 ST, D841 ST, D854 ST, E641 ST, E649 Wh, E650 SI, XOU483 ST, XOU594 ST
• CDA: 720 EF BL, 720 EF ST, CD 708BL BL, CD 708SS ST, CD 708W WH
• Diplomat: 600EA (ADP3200) ST, 620EMST, 720EA (ADP4540) ST, 720EFST, 900EA (ADP4200) ST, C90E, ADP3110, ADP3112, ADP3114, ADP3120, ADP3702, ADP3722, ADP3742, ADP4220, ADP4230, ADP4500, ADP4501, ADP4502, ADP4504, ADP4505, APL3401, APL3491, APL4301, APL4318, APL4328, APL4391, APL4406, APL4416, APL4426, APL4446, APL4456, APL4466, APL4476, APL5210, APL5220, APL5511, APL5521, APL5811, APL5813, APL5821, APL5823, APL5844, APL5854, APL5893
• Hygena: AHY4132, AHY4134, AHY4144, AHY4501, AHY4502, APL3318, APL3328, APL3413, APL3391, APL3418, APL3423, APL3428, APL3443, APL4212, APL4215, APL4222, APL4225, APL4245, APL4311, APL4313, APL4316, APL4317, APL4321, APL4326, APL4327
• Ignis: AKF506AV, AKF506WH
• IKEA: 44541610, 64541685
• New World: 110DF CA, 110DF GR, 110DF ST, 55EDMG SVG, 60 DFDOM ST, 60EDOM ST, DF90 ST, E60FA ST, E70DOA GR, E70DOA ST, E70DOA WH, E90DOA GR, E90DOA ST, E90DOA WH, TCEOA70 ST, 208520082, 208520083, 208520084, 208520085, 208520086, 208520087, 208552095, 208585056, 208585057, 208585059, 208585060, 208585061, 208585062, 208585063, 208585065, 208585066, 208585067, 208585092, 208585093, 208585094, 208587029, 208587030, 208587032, 208587033, 208587034, 208587042, 208587045, 208587046, 208587047, 208587048, 208587049, 208587080, 208587081, 208587082, 208587110, 208588021, 208588022, 208588024, 208588025, 208588026, 208588030, 208588031, 208588032, 208588034, 208588051, 208588052, 208588053, 208590050, 208590051, 208590052, 208590053, 208590054

5. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

The following steps provide a general guide for replacing a fan oven heating element. Specific procedures may vary depending on your oven model. Always refer to your appliance's service manual if available.

1. പവർ വിച്ഛേദിക്കുക: Crucially, turn off the electricity supply to your oven at the main circuit breaker or fuse box. Confirm power is off using a voltagഇ ടെസ്റ്റർ.
2. Access the Oven Interior: Open the oven door. You may need to remove oven shelves and side racks to gain clear access to the rear panel.
3. Remove Rear Panel: Locate the rear panel inside the oven cavity, which typically covers the fan and heating element. Unscrew the retaining screws and carefully remove the panel.
4. Disconnect Old Element: Identify the old heating element. Note the position of the electrical connections (usually two terminals). Take a photograph for reference if unsure. Carefully disconnect the wires from the terminals.
5. പഴയ ഘടകം നീക്കം ചെയ്യുക: Unscrew any mounting brackets or nuts holding the old element in place. Gently pull the element forward and out of the oven cavity.
6. പുതിയ ഘടകം ഇൻസ്റ്റാൾ ചെയ്യുക: Insert the new heating element into the oven, ensuring it sits correctly in its mounting points. Secure it with the screws or nuts previously removed.
7. വയറിംഗ് ബന്ധിപ്പിക്കുക: Reconnect the electrical wires to the terminals of the new element, referring to your photograph if necessary. Ensure connections are tight and secure.
8. ഓവൻ വീണ്ടും കൂട്ടിച്ചേർക്കുക: Replace the interior rear panel and secure it with its screws. Reinstall oven shelves and side racks.
9. പവർ പുനഃസ്ഥാപിക്കുകയും പരിശോധിക്കുകയും ചെയ്യുക: Restore power to the oven at the main circuit breaker. Set the oven to a fan-assisted heating mode and observe if the element heats up correctly. Monitor for any unusual smells or sounds during the initial test.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the new heating element is installed and tested, the oven should operate as designed. Refer to your oven's original user manual for specific operating instructions, temperature settings, and cooking functions.

7. പരിപാലനം

The heating element itself requires minimal maintenance. However, regular cleaning of your oven can help prolong the life of all components, including the element.

• Ensure the oven is cool and disconnected from power before cleaning.
• Avoid direct contact of harsh chemical cleaners with the heating element.
• Wipe away any food spills promptly to prevent carbon buildup, which can affect element efficiency.

8. പ്രശ്‌നപരിഹാരം

If your oven is not heating correctly after replacing the element, consider the following:

• ചൂടില്ല:
  • Check if the oven is receiving power from the main supply.
  • Verify that the element's electrical connections are secure and correctly attached.
  • Ensure the oven's thermostat or selector switch is set correctly.
• അസമമായ ചൂടാക്കൽ:
  • Confirm the element is fully seated and not obstructed.
  • This issue might indicate a problem with other oven components (e.g., fan motor, thermostat) rather than the element itself.
• ട്രിപ്പിംഗ് സർക്യൂട്ട് ബ്രേക്കർ:
  • Immediately disconnect power. This could indicate a short circuit. Recheck wiring for any exposed conductors or incorrect connections.
  • Ensure the element is compatible and rated correctly for your oven's electrical system.

If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified appliance technician.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

Specific warranty information for this replacement part is not provided in the product details. For warranty claims or technical support, please contact the seller or manufacturer directly with your purchase details.