Intermatic IOS-DPBIF-IV

ഇന്റർമാറ്റിക് IOS-DPBIF-IV ഡെക്കറേറ്റർ PIR ഒക്യുപൻസി സെൻസർ യൂസർ മാനുവൽ

Model: IOS-DPBIF-IV

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Intermatic IOS-DPBIF-IV is a Decorator Passive Infrared (PIR) Occupancy Sensor designed for automatic lighting control. This sensor detects motion within its field of view to turn lights ON and OFF, providing energy savings and convenience. It features an ivory finish and is suitable for wall mounting.

Intermatic IOS-DPBIF-IV Decorator PIR Occupancy Sensor in Ivory

ചിത്രം: മുൻഭാഗം view of the Intermatic IOS-DPBIF-IV Decorator PIR Occupancy Sensor in ivory color. The top section houses the PIR lens, and the bottom section features a manual override button.

പ്രധാന സവിശേഷതകൾ:

  • Adjustable time delay for lights to turn OFF, ranging from 15 seconds to 30 minutes.
  • Wide coverage area of 150 degrees, covering up to 980 square feet.
  • Automatic ON/OFF control based on occupancy detection.
  • Compatible with CFL (Compact Fluorescent Lamp) lighting.
  • Includes a decorator wall plate for a clean installation.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ: Before beginning installation, ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring.

  1. വൈദ്യുതി വിച്ഛേദിക്കൽ: Locate the circuit breaker or fuse that supplies power to the switch box where the sensor will be installed. Turn OFF the power. Verify power is off using a voltagഇ ടെസ്റ്റർ.
  2. നിലവിലുള്ള സ്വിച്ച് നീക്കംചെയ്യുക: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch, noting their connections (e.g., line, load, ground, neutral if present).
  3. സെൻസർ വയറിംഗ്: Connect the wires from the wall box to the corresponding wires on the IOS-DPBIF-IV sensor. Refer to the wiring diagram provided with the product packaging for specific connections. Typically, this involves connecting the Line (hot), Load, and Ground wires. A neutral wire connection may also be required depending on the specific model and electrical code.
  4. സെൻസർ മൌണ്ട് ചെയ്യുന്നു: Gently push the wired sensor into the electrical box. Secure it with the provided mounting screws.
  5. വാൾ പ്ലേറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: Attach the decorator wall plate over the sensor.
  6. പവർ പുന ore സ്ഥാപിക്കുക: സർക്യൂട്ട് ബ്രേക്കറിലോ ഫ്യൂസ് ബോക്സിലോ പവർ വീണ്ടും ഓണാക്കുക.

കുറിപ്പ്: For detailed wiring diagrams and specific electrical requirements, consult the full installation guide included with your product or available on the manufacturer's webസൈറ്റ്.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Intermatic IOS-DPBIF-IV sensor operates automatically based on detected occupancy. It also includes a manual override button.

യാന്ത്രിക പ്രവർത്തനം:

  • When motion is detected within the sensor's 150-degree field of view, the connected lights will turn ON.
  • The lights will remain ON as long as occupancy is detected.
  • After no motion is detected for a preset time delay, the lights will automatically turn OFF. The time delay can be adjusted from 15 seconds to 30 minutes. Refer to the product's internal settings or instructions for adjusting this delay.

മാനുവൽ അസാധുവാക്കൽ:

The sensor features a manual push-button switch located on the front face. This button allows for manual control of the lights, overriding the automatic occupancy detection.

  • Press to Turn ON/OFF: A single press of the button will toggle the lights ON or OFF, regardless of occupancy.
  • Return to Automatic: After manual operation, the sensor typically returns to automatic mode after a period of time or upon the next detection of occupancy, depending on the specific model's logic. Consult the full manual for details on how manual override interacts with automatic mode.

മെയിൻ്റനൻസ്

The Intermatic IOS-DPBIF-IV Occupancy Sensor requires minimal maintenance to ensure optimal performance.

  • വൃത്തിയാക്കൽ: Periodically wipe the sensor lens and housing with a soft, dry cloth to remove dust or dirt. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
  • തടസ്സ പരിശോധന: Ensure that the sensor's field of view is not obstructed by furniture, curtains, or other objects that could interfere with motion detection.
  • ഉപയോക്തൃ-സേവനയോഗ്യമായ ഭാഗങ്ങൾ ഇല്ല: The sensor contains no user-serviceable parts. Do not attempt to open or repair the unit. Refer any issues to qualified service personnel.

ട്രബിൾഷൂട്ടിംഗ്

If you experience issues with your Intermatic IOS-DPBIF-IV Occupancy Sensor, refer to the following common problems and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ചലനം കണ്ടെത്തിയാൽ ലൈറ്റുകൾ ഓണാകില്ല.
  • No power to the sensor.
  • തെറ്റായ വയറിംഗ്.
  • Sensor lens obstructed.
  • സെൻസർ സെൻസിറ്റിവിറ്റി വളരെ കുറവാണ്.
  • സർക്യൂട്ട് ബ്രേക്കർ/ഫ്യൂസ് പരിശോധിക്കുക.
  • ഡയഗ്രം അനുസരിച്ച് വയറിംഗ് കണക്ഷനുകൾ പരിശോധിക്കുക.
  • സെൻസറിൽ നിന്നുള്ള എല്ലാ തടസ്സങ്ങളും നീക്കം ചെയ്യുക view.
  • Adjust sensor sensitivity (if applicable, refer to full manual).
Lights turn OFF too quickly or too slowly.Time delay setting is incorrect.Adjust the time delay setting on the sensor. Refer to the product's specific instructions for adjustment methods.
Lights turn ON without apparent motion.
  • Air currents (HVAC vents).
  • Heat sources within detection area.
  • സെൻസർ സെൻസിറ്റിവിറ്റി വളരെ കൂടുതലാണ്.
  • Relocate sensor or adjust HVAC vents.
  • Ensure no heat sources are directly in the sensor's path.
  • Reduce sensor sensitivity (if applicable).

If the problem persists after attempting these solutions, contact Intermatic customer support or consult a qualified electrician.

സ്പെസിഫിക്കേഷനുകൾ

മോഡൽ നമ്പർIOS-DPBIF-IV
ബ്രാൻഡ്ഇൻ്റർമാറ്റിക്
നിറംആനക്കൊമ്പ്
പവർ ഉറവിടംകോർഡഡ് ഇലക്ട്രിക്
വാല്യംtagഇ റേറ്റിംഗ്120 വി.എ.സി
ലോഡ് റേറ്റിംഗ്500 W at 120 VAC (Incandescent/Tungsten), 500 VA at 120 VAC (Fluorescent/Ballast), 1/8 HP at 120 VAC (Motor)
ഫീൽഡ് View150 ഡിഗ്രി
പരമാവധി കവറേജ്980 ചതുരശ്ര അടി
മൗണ്ടിംഗ് തരംമതിൽ മൗണ്ട്
ഉൽപ്പന്ന അളവുകൾ3 x 2 x 4.8 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം4.8 ഔൺസ്
സർട്ടിഫിക്കേഷനുകൾUL, cUL
യു.പി.സി078275125247

വാറൻ്റി വിവരങ്ങൾ

The Intermatic IOS-DPBIF-IV Occupancy Sensor comes with a 2 വർഷത്തെ പരിമിത വാറൻ്റി. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and details on how to make a warranty claim, please refer to the official warranty statement included with your product or visit the Intermatic webസൈറ്റ്.

കുറിപ്പ്: The warranty typically covers product replacement for eligible defects.

Support and Further Resources

For additional assistance, technical support, or to access the complete product documentation, please use the following resources:

  • ഔദ്യോഗിക ഉപയോക്തൃ ഗൈഡ് (PDF): PDF ഡൗൺലോഡ് ചെയ്യുക
  • ഇൻ്റർമാറ്റിക് Webസൈറ്റ്: Visit the official Intermatic webഉൽപ്പന്ന വിവരങ്ങൾ, പതിവുചോദ്യങ്ങൾ, ബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾ എന്നിവയ്‌ക്കുള്ള സൈറ്റ്.
  • കസ്റ്റമർ സർവീസ്: Contact Intermatic customer service for direct support regarding installation, operation, or troubleshooting.

അനുബന്ധ രേഖകൾ - IOS-DPBIF-IV

പ്രീview Intermatic Product Catalog: Comprehensive Controls for Lighting, HVAC, and More
Explore the Intermatic Product Catalog featuring a wide range of lighting controls, time switches, occupancy sensors, surge protection, and weatherproof covers for residential, commercial, and industrial applications. Discover solutions for energy efficiency and automation.
പ്രീview ഇന്റർമാറ്റിക് IOS-DOV ഒക്യുപൻസി / ഒഴിവ് (2-IN-1) സെൻസർ സ്വിച്ച്
ഇന്റർമാറ്റിക് IOS-DOV 2-ഇൻ-1 ഒക്യുപൻസി ആൻഡ് വേക്കൻസി സെൻസർ സ്വിച്ചിനായുള്ള ഇൻസ്റ്റാളേഷൻ, ഓപ്പറേഷൻ, ട്രബിൾഷൂട്ടിംഗ് ഗൈഡ്. ഓട്ടോമാറ്റിക് ലൈറ്റിംഗ് നിയന്ത്രണത്തിനായി ക്രമീകരിക്കാവുന്ന സമയ കാലതാമസം, സംവേദനക്ഷമത, ആംബിയന്റ് ലൈറ്റ് ക്രമീകരണങ്ങൾ എന്നിവ സവിശേഷതകളിൽ ഉൾപ്പെടുന്നു.
പ്രീview ഇന്റർമാറ്റിക് IOS-DPBIF2 വേക്കൻസി സെൻസർ സ്വിച്ച് ഇൻസ്റ്റാളേഷനും ഓപ്പറേഷൻ ഗൈഡും
ഇന്റർമാറ്റിക് IOS-DPBIF2 വേക്കൻസി സെൻസർ സ്വിച്ചിനായുള്ള സമഗ്ര ഗൈഡ്, ഒക്യുപൻസി അധിഷ്ഠിത ലൈറ്റിംഗ് നിയന്ത്രണത്തിനായുള്ള ഇൻസ്റ്റാളേഷൻ, വയറിംഗ്, ക്രമീകരണം, പ്രവർത്തനം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ഇന്റർമാറ്റിക് EJ341C/EJ343C ലൈറ്റിംഗ് ടൈമർ സ്വിച്ച് ഇൻസ്റ്റാളേഷനും പ്രോഗ്രാമിംഗ് ഗൈഡും
ഇന്റർമാറ്റിക് EJ341C (സിംഗിൾ പോൾ), EJ343C (ത്രീ വേ) ലൈറ്റിംഗ് ടൈമർ സ്വിച്ചുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രോഗ്രാം ചെയ്യുന്നതിനുമുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ. സജ്ജീകരണം, നിയന്ത്രണങ്ങൾ, പ്രോഗ്രാമിംഗ് രീതികൾ, ട്രബിൾഷൂട്ടിംഗ്, സ്പെസിഫിക്കേഷനുകൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview Intermatic ET2825 Electronic 2-Circuit Astronomic 7-Day Time Switch: Installation and Setup Guide
This guide provides detailed instructions for the installation, setup, and programming of the Intermatic ET2825 Electronic 2-Circuit Astronomic 7-Day Time Switch. Learn how to configure schedules, DST, and Astro zones for efficient load control.
പ്രീview ഇന്റർമാറ്റിക് EI40C/E140AC ഇലക്ട്രോണിക് ഓട്ടോമാറ്റിക് ഷട്ട്-ഓഫ് ടൈമർ
Learn about the Intermatic EI40C/E140AC Electronic Automatic Shut-Off Timer. This guide covers installation, features like programmable timing and warning signals, and troubleshooting for efficient load control in residential and commercial applications.