ഉൽപ്പന്നം കഴിഞ്ഞുview
The FUTURO Comfort Stabilizing Back Support is designed to provide firm, customizable support for a stiff, strained, or aching back. Its anatomical design allows for a natural range of motion while ensuring the back panel evenly distributes support. Made with breathable materials, it enhances airflow to help keep skin dry, ensuring comfort during everyday activities.
Image: FUTURO Comfort Stabilizing Back Support in its retail packaging, highlighting the product's branding and key features.
പ്രധാന സവിശേഷതകൾ:
- ഉറച്ച രൂപകൽപ്പന: Offers customizable levels of support and compression.
- ക്രമീകരിക്കാവുന്ന സ്ട്രാപ്പുകൾ: Provide a personalized and secure fit.
- ശ്വസിക്കാൻ കഴിയുന്ന വസ്തുക്കൾ: Enhance airflow to help keep skin dry and comfortable.
- ശരീരഘടനാ രൂപകൽപ്പന: Allows for natural range of motion.
- Even Support Distribution: Back panel is designed to evenly distribute support across the back.
Setup and Sizing
Before first use, ensure the back support is clean and free from any packaging materials. To select the correct size, measure around your waist at the navel. Refer to the sizing chart below to find your appropriate size.
Image: Detailed sizing chart illustrating how to measure your waist at the navel to determine the correct size for the back support.
| വലിപ്പം | Waist Measurement (Inches) | Waist Measurement (CM) |
|---|---|---|
| ചെറുത്/ഇടത്തരം | 29.0-49.0 ഇഞ്ച് | 73.6-99.1 സെ.മീ |
| വലുത്/എക്സ്-വലുത് | 39.0-50.0 ഇഞ്ച് | 99.1-127.0 സെ.മീ |
| (Not specified in input, placeholder) | (Not specified in input, placeholder) | (Not specified in input, placeholder) |
Note: The 2XL/3XL size was mentioned in features but specific measurements were not provided in the input data.
ധരിക്കലും ക്രമീകരിക്കലും
Follow these steps to properly wear and adjust your FUTURO Comfort Stabilizing Back Support for optimal comfort and effectiveness:
- Position the Support: Place the back support around your lower back, ensuring the padded section is centered on your spine. The wider part of the brace should be at the back, covering the lumbar area.
- Secure the Main Belt: Bring the main belt ends around to the front of your body. Overlap the ends and secure them firmly using the Velcro closure. Adjust for a snug but comfortable fit around your abdomen.
- Adjust Side Straps for Compression: Locate the two smaller, elastic side straps. Pull these straps forward to your desired level of compression and secure them to the front of the main belt using their Velcro closures. These straps allow for fine-tuning the support and tightness.
- സുഖസൗകര്യങ്ങൾക്കായി പരിശോധിക്കുക: Ensure the brace feels supportive without being overly restrictive or causing discomfort. You should be able to move naturally while feeling the stabilizing effect.
Image: A person wearing the FUTURO back support, demonstrating proper placement around the lower back.
ചിത്രം: പിൻഭാഗം view of the FUTURO back support being worn, showing the anatomical design and how it conforms to the back.
The firm padding and breathable materials contribute to both effective support and comfort during extended wear.
Image: Close-up of the interior of the back support, highlighting the firm, padded areas designed to target and support sore or aching muscles.
Image: The back panel of the FUTURO back support, illustrating how it is designed to evenly distribute support across the lower back.
Image: Close-up of the breathable materials used in the FUTURO back support, designed to allow airflow and keep skin dry.
പരിചരണവും പരിപാലനവും
Proper care will extend the life of your FUTURO Comfort Stabilizing Back Support. Always refer to the product's care label for specific instructions.
- കഴുകൽ: Hand wash with mild soap in cold water. Do not use bleach or fabric softener.
- ഉണക്കൽ: Air dry flat. Do not machine wash or tumble dry. Do not iron.
- സംഭരണം: Store in a cool, dry place away from direct sunlight when not in use. Ensure Velcro closures are fastened to prevent lint and debris accumulation.
ട്രബിൾഷൂട്ടിംഗ്
If you experience any issues with your back support, consider the following common solutions:
- അസ്വസ്ഥത അല്ലെങ്കിൽ തിരുമ്മൽ:
- Ensure the brace is not too tight. Loosen the main belt and side straps slightly.
- Adjust the position of the brace to ensure the padded area aligns correctly with your lower back.
- Wear a thin layer of clothing underneath the brace if skin irritation occurs.
- പിന്തുണയുടെ അഭാവം:
- Tighten the main belt and side straps until you feel adequate, firm support.
- Verify that the brace is positioned correctly on your lower back.
- Check the sizing chart to ensure you are using the appropriate size for your waist measurement.
- Velcro Not Holding:
- Clean any lint or debris from the Velcro fasteners.
- Ensure the Velcro is fully engaged when fastening.
- If the Velcro is worn out, consider replacing the product for optimal performance.
If problems persist, consult a healthcare professional or contact Futuro customer support.
ഉൽപ്പന്ന സവിശേഷതകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 46815EN |
| ബ്രാൻഡ് | Futuro |
| ഉൽപ്പന്ന അളവുകൾ | 5 x 4 x 9.25 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 11.2 ഔൺസ് |
| നിറം | ചാരനിറം |
| വകുപ്പ് | യുണിസെക്സ്-മുതിർന്നവർ |
| ആദ്യം ലഭ്യമായ തീയതി | ഡിസംബർ 15, 2006 |
വാറൻ്റിയും പിന്തുണയും
For detailed warranty information and customer support, please refer to the official Futuro website or the "Instructions for Use (IFU)" document provided with your product.
You can also find the digital version of the Instructions for Use (IFU) here: FUTURO Back Support IFU (PDF)
For further assistance, contact Futuro customer service through their official channels.
