ഉൽപ്പന്നം കഴിഞ്ഞുview
The Belltech 2212FF Street Performance Shock Absorber is engineered to significantly enhance the ride quality and handling of lowered Sport Trucks and SUVs. Unlike standard factory units, these shock absorbers are specifically designed to operate effectively within reduced suspension travel, addressing common issues such as poor ride quality, excessive body roll, and uncontrolled vehicle movements during braking and acceleration.
Developed through collaboration between KW automotive and Belltech engineers, these shock absorbers incorporate advanced technology to provide superior damping control. They are precision-engineered for specific vehicle applications, ensuring optimal performance and comfort.
Image: Belltech 2212FF Street Performance Shock Absorber, a single silver shock absorber with "STREET PERFORMANCE" branding.
പ്രധാന സവിശേഷതകൾ:
- Premium performing shock absorber designed for lowered vehicles.
- Oversized construction for enhanced damping നിയന്ത്രണം.
- Guaranteed vehicle-specific fitment.
- Complements larger OE and aftermarket wheel and tire packages, improving tire contact.
- Maintains OEM ride quality while adding performance, control, and comfort.
- Features a 15mm hardened chrome piston rod for durability.
- PTFE coated piston and bushing for longevity and reduced friction.
- Reinforced OE quality rubber bushings.
- പൊടിയിൽ നിന്നും അവശിഷ്ടങ്ങളിൽ നിന്നും സംരക്ഷിക്കാൻ പൗഡർ കോട്ടിംഗ് ഉള്ള ഷോക്ക് ബോഡിയും മെറ്റൽ ഡസ്റ്റ് ബൂട്ടും.
ഇൻസ്റ്റാളേഷനും സജ്ജീകരണവും
Proper installation of the Belltech 2212FF Street Performance Shock Absorbers is crucial for optimal performance and safety. It is highly recommended that installation be performed by a qualified automotive technician.
For detailed, step-by-step installation instructions, please refer to the official Installation Manual provided by Belltech. This document contains critical information regarding vehicle preparation, component removal, and proper torque specifications for all fasteners.
പ്രധാനപ്പെട്ടത്: Always ensure the vehicle is securely supported on jack stands or a lift before beginning any work. Disconnect the battery if working near electrical components. Wear appropriate personal protective equipment, including safety glasses and gloves.
ഔദ്യോഗിക ഇൻസ്റ്റലേഷൻ മാനുവൽ (PDF) ഡൗൺലോഡ് ചെയ്യുക.
Image: Two Belltech shock absorbers positioned near a vehicle's rear wheel and suspension components, illustrating their intended placement and the importance of proper installation for stability.
പ്രീ-ഇൻസ്റ്റലേഷൻ പരിശോധനകൾ:
- Verify that the shock absorbers are the correct model (2212FF) for your specific vehicle application.
- Inspect all components for any signs of shipping damage or manufacturing defects.
- Gather all necessary tools and equipment as specified in the installation manual.
പ്രവർത്തന സവിശേഷതകൾ
Once installed, the Belltech 2212FF Street Performance Shock Absorbers will significantly alter your vehicle's handling and ride dynamics, especially in lowered applications. These shocks are designed to provide a balanced center of gravity and increased stability.
പ്രതീക്ഷിക്കുന്ന പ്രകടനം:
- Improved Ride Quality: Experience a smoother ride compared to OEM shocks in a lowered vehicle, as these units are tuned for reduced suspension travel.
- മെച്ചപ്പെടുത്തിയ സ്ഥിരത: Notice increased stability during hard braking and quick transitional maneuvers, reducing front lean and body roll.
- Optimized Tire Contact: The design helps maintain better tire contact with the road surface, particularly with larger wheel and tire packages.
- പ്രതികരണാത്മകമായ കൈകാര്യം ചെയ്യൽ: The precision engineering creates a homeostatic environment between rebound and compression valves, leading to more controlled and responsive handling.
Image: A red lowered pickup truck driving on a road, demonstrating the vehicle's stance and handling with Belltech Street Performance Shocks. The image highlights the hardened chrome 15mm piston rod and PTFE coated components for durability and smooth operation.
It is important to allow a short break-in period for the new shock absorbers to settle and for you to become accustomed to the improved vehicle dynamics.
മെയിൻ്റനൻസ്
Belltech 2212FF Street Performance Shock Absorbers are designed for long-lasting performance with minimal maintenance. However, periodic inspection is recommended to ensure continued optimal operation and safety.
ശുപാർശ ചെയ്യുന്ന അറ്റകുറ്റപ്പണി ഷെഡ്യൂൾ:
- Every 10,000 miles or 12 months (whichever comes first):
- Visually inspect the shock absorbers for any signs of fluid leaks. A slight film is normal, but active dripping indicates a seal failure.
- Check the condition of the rubber bushings at both ends of the shock. Look for cracks, tears, or excessive wear.
- Ensure all mounting bolts are securely tightened to the manufacturer's specified torque.
- Inspect the shock body and dust boot for any physical damage, dents, or corrosion.
- After severe off-road use or heavy impacts:
- Perform an immediate inspection for any damage or misalignment.
The PTFE coated piston and bushing contribute to the longevity and reduced friction of the shock, minimizing internal wear. The powder-coated body and metal dust boot provide protection against environmental elements like dust and debris.
If any issues are detected during inspection, it is advisable to consult a qualified technician for further assessment and repair or replacement.
ട്രബിൾഷൂട്ടിംഗ്
This section addresses common issues that may arise with shock absorbers. If you experience any of the following, consider these potential causes and solutions.
| ലക്ഷണം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Excessive Bouncing or "Floaty" Ride | Worn or failed shock absorber; incorrect shock for application; improper installation. | Inspect shocks for leaks or damage. Verify correct model and proper installation. Replace if necessary. |
| Harsh or Rough Ride | Incorrect shock for application (e.g., too stiff); worn bushings; suspension component interference. | Ensure correct shock model. Check bushings for wear. Inspect suspension for clearance issues. |
| Clunking or Knocking Noises | Loose mounting bolts; worn bushings; damaged shock; interference with other components. | Tighten mounting bolts to spec. Inspect bushings for wear. Check for contact points with other parts. Replace damaged shock. |
| ഷോക്ക് ബോഡിയിൽ നിന്ന് ദ്രാവക ചോർച്ച | സീലിന് കേടുപാടുകൾ സംഭവിച്ചു; ആന്തരിക ഘടക പരാജയം. | A small film is normal, but active dripping indicates failure. Replace the shock absorber. |
If troubleshooting steps do not resolve the issue, or if you are unsure about the cause, it is always best to seek assistance from a certified automotive professional.
സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ബെൽടെക് |
| മോഡൽ നമ്പർ | 2212FF |
| യാന്ത്രിക ഭാഗം സ്ഥാനം | ഫ്രണ്ട് |
| വാഹന സേവന തരം | കാർ, ട്രക്ക് |
| മെറ്റീരിയൽ | ലോഹം |
| എക്സ്റ്റീരിയർ ഫിനിഷ് | ചായം പൂശി |
| ഇനത്തിൻ്റെ ഭാരം | 6.6 പൗണ്ട് |
| ഉൽപ്പന്ന അളവുകൾ | 19.75 x 3 x 3.5 ഇഞ്ച് |
| യു.പി.സി | 722439086478 |
| നിർമ്മാതാവിൻ്റെ ഭാഗം നമ്പർ | 2212FF |
| ആദ്യ തീയതി ലഭ്യമാണ് | 27 മാർച്ച് 2011 |
വാറൻ്റിയും പിന്തുണയും
For specific warranty information regarding your Belltech 2212FF Street Performance Shock Absorber, please refer to the documentation included with your purchase or visit the official Belltech website. Warranty terms and conditions typically cover manufacturing defects and material flaws for a specified period.
If you require technical assistance, have questions about installation, or need to report a potential issue, please contact Belltech customer support directly. Their contact information can usually be found on their official webഉൽപ്പന്ന പാക്കേജിംഗിനുള്ളിൽ.
ഓൺലൈൻ ഉറവിടങ്ങൾ:
- Official Belltech Webസൈറ്റ്: www.belltech.com (Note: This is a generic link, actual link might be different)
- ഇൻസ്റ്റലേഷൻ മാനുവൽ (PDF): ഇവിടെ ഡൗൺലോഡ് ചെയ്യുക
Always provide your product model number (2212FF) and purchase date when contacting support to expedite assistance.
