ആമുഖം
This manual provides instructions for the installation, operation, and maintenance of the Avaya 1151B1 VOIP POE Power Supply Injector. This device is designed to provide Power over Ethernet (POE) to compatible Avaya IP Phones, such as the 4600 and 5600 series, ensuring reliable power and data connectivity through a single Ethernet cable.
സുരക്ഷാ വിവരങ്ങൾ
ജാഗ്രത: This device is intended for indoor use only. Do not expose to water or excessive humidity. Ensure the power source meets the specified voltage and frequency requirements to prevent damage or electrical hazards.
പാക്കേജ് ഉള്ളടക്കം
Verify that all items are present in the package upon unboxing:
- Avaya 1151B1 POE Power Supply Injector
- പവർ കേബിൾ
Image: The Avaya 1151B1 POE Power Supply Injector and its accompanying power cable, neatly packaged in a cardboard box. The injector is sealed in a plastic bag.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Avaya 1151B1 is a Power over Ethernet (POE) injector that supplies both power and data to a connected IP phone via a single Ethernet cable. It features standard RJ45 connectors for network and phone connections, along with a power input.
ചിത്രം: മുൻഭാഗം view of the Avaya 1151B1 POE Power Supply Injector, showing two RJ45 ports labeled "PHONE" and "LINE", and a "POWER ON" LED indicator.
- LINE Port: Connects to your network switch or router. This port receives data from your network.
- ഫോൺ പോർട്ട്: Connects to your Avaya IP Phone. This port delivers both data and power to the phone.
- എൽഇഡിയിൽ പവർ: Illuminates to indicate when the unit is receiving power and is operational.
Image: Detailed label on the Avaya 1151B1 POE Power Supply Injector, displaying model number 1151B1, input specifications (100-240V, 50-60Hz, 500-250mA), and output specifications (+48V, 417mA). Various regulatory compliance marks are also visible.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to properly set up your Avaya 1151B1 POE Power Supply Injector:
- Connect the provided power cable to the power input on the Avaya 1151B1 injector. Then, plug the power cable into a standard electrical outlet. The "POWER ON" LED on the injector should illuminate, indicating it is receiving power.
- Connect an Ethernet cable from your network switch, router, or wall jack to the ലൈൻ port on the Avaya 1151B1 injector. This provides the data connection.
- എന്നതിൽ നിന്ന് മറ്റൊരു ഇതർനെറ്റ് കേബിൾ ബന്ധിപ്പിക്കുക ഫോൺ port on the injector to the Ethernet port on your compatible Avaya IP Phone (e.g., 4600/5600 series). This cable will deliver both data and power to the phone.
- Ensure all cable connections are secure and properly seated. Your IP phone should now power on and begin its startup sequence, establishing a network connection.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once properly connected and powered, the Avaya 1151B1 operates automatically. The "POWER ON" LED indicates that the unit is functioning correctly and supplying power. The connected IP phone will power on and attempt to establish a network connection, allowing for normal VOIP phone operation.
മെയിൻ്റനൻസ്
The Avaya 1151B1 POE Power Supply Injector requires minimal maintenance to ensure optimal performance and longevity:
- Keep the unit clean and free from dust. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners.
- Ensure adequate ventilation around the unit to prevent overheating. Do not block any ventilation openings.
- Avoid exposing the unit to liquids, extreme temperatures, or direct sunlight.
- Regularly check all cable connections to ensure they are secure and undamaged.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Avaya 1151B1 POE Power Supply Injector, refer to the following troubleshooting steps:
- പവർ എൽഇഡി ഇല്ല:
- Check if the power cable is securely plugged into both the injector and a functional electrical outlet.
- വൈദ്യുതി വിതരണം ചെയ്യുന്നുണ്ടെന്ന് ഉറപ്പാക്കാൻ മറ്റൊരു ഉപകരണം ഉപയോഗിച്ച് ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റ് പരിശോധിക്കുക.
- IP Phone Not Powering On:
- Ensure the "POWER ON" LED on the injector is illuminated. If not, refer to "No Power LED" troubleshooting.
- Verify the Ethernet cable connection between the injector's PHONE port and the IP phone is secure and undamaged.
- Confirm that your IP phone is compatible with POE and the Avaya 1151B1 specifications.
- No Network Connection on IP Phone:
- Verify the Ethernet cable connection between your network switch/router and the injector's LINE port.
- Ensure your network switch/router is operational and providing network connectivity.
- Check the Ethernet cable between the injector and the IP phone for damage.
സ്പെസിഫിക്കേഷനുകൾ
| സ്വത്ത് | മൂല്യം |
|---|---|
| മോഡൽ | 1151B1 |
| നിർമ്മാതാവ് | അവായ ഇൻക്. |
| Product ID (Comcode) | 700227242 |
| സീരിയൽ നമ്പർ | എസ് 05 ആർ 450001948 |
| ഇൻപുട്ട് വോളിയംtage | 100-240 വി എസി |
| ഇൻപുട്ട് ഫ്രീക്വൻസി | 50-60 Hz |
| ഇൻപുട്ട് കറൻ്റ് | 500-250 എം.എ |
| Putട്ട്പുട്ട് വോളിയംtage | +48 വി ഡിസി |
| ഔട്ട്പുട്ട് കറൻ്റ് | 417 എം.എ |
| ഔട്ട്പുട്ട് വാട്ട്tage | 20 വാട്ട്സ് |
| കണക്റ്റർ തരം | RJ45 (D8W modular plug cables) |
| ഇനത്തിൻ്റെ ഭാരം | 1.1 പൗണ്ട് (0.5 കി.ഗ്രാം) |
| പാക്കേജ് അളവുകൾ | 8.5 x 4.8 x 2.8 ഇഞ്ച് |
| പരിസ്ഥിതി | ഇൻഡോർ ഉപയോഗത്തിന് മാത്രം |
Image: Product label on the packaging box, indicating "AVAYA Inc. 1151B1", Product ID "700227242", and Serial Number "05R450001948". It also states "ASSEMBLED IN PRC" and "WT: 0.5 KGS".
വാറൻ്റിയും പിന്തുണയും
For warranty information and technical support, please refer to the official Avaya documentation or contact Avaya customer service directly. It is recommended to keep your purchase receipt and the product serial number (S05R450001948) for reference when seeking support.
Image: Cover page of an Avaya Communication Instruction Manual, listing "1151B1 – Power Supply" with Comcode 700227242, and "1151B2 – Power Supply With Battery Holdover" with Comcode 700237019. This indicates the manual covers both 1151B1 and 1151B2 models.
