ആമുഖം
This manual provides instructions for the Danco 10407 3S-15C Cold Stem, a replacement part designed for Aquasource and Glacier Bay faucets. This component is used to repair leaks from the cold water side of two-handle sink, tub, or shower faucets. Replacing a faulty faucet stem is an effective and economical method to stop drips, conserve water and energy, and restore your faucet to proper working condition.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Danco 10407 3S-15C Cold Stem is a cartridge-type stem specifically engineered for the cold water side of compatible faucets. It is constructed from durable plastic to withstand daily use and is designed to meet the requirements for the reduction of low lead in drinking water.
പ്രധാന സവിശേഷതകൾ:
- Constructed of durable plastic.
- Designed to fit Aquasource/Glacier Bay faucets.
- For cold water side applications.
- Cartridge-type stem design.
- ID length 3, broach S.
- Complies with the Reduction of Low Lead in Drinking Water Act.
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ:
- One (1) Danco 10407 3S-15C Cold Stem.
- Associated washers and O-rings for installation.
Image: The Danco 10407 3S-15C Cold Stem shown with its accompanying O-rings and washer, ready for installation.
Image: The Danco 10407 3S-15C Cold Stem displayed in its retail packaging, indicating compatibility with Glacier Bay and Aquasource faucets.
ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
Before beginning installation, ensure you have the necessary tools, which typically include a screwdriver, adjustable wrench, and possibly pliers. Always turn off the water supply to the faucet before starting any repair work.
ഘട്ടം ഘട്ടമായുള്ള ഗൈഡ്:
- ജലവിതരണം ഓഫാക്കുക: Locate the shut-off valves under the sink or the main water supply to your home and turn them off. Turn on the faucet to drain any remaining water and relieve pressure.
- ഫ്യൂസറ്റ് ഹാൻഡിൽ നീക്കം ചെയ്യുക: Carefully remove the decorative cap (if present) on the cold water handle. Use a screwdriver to loosen and remove the screw holding the handle in place. Lift the handle off.
- Remove Packing Nut/Bonnet Nut: Below the handle, you will find a packing nut or bonnet nut. Use an adjustable wrench to carefully unscrew this nut.
- പഴയ തണ്ട് വേർതിരിച്ചെടുക്കുക: Once the nut is removed, you can typically pull the old faucet stem straight out. Note its orientation for reference.
- പരിശോധിച്ച് വൃത്തിയാക്കുക: Inspect the faucet body for any debris or mineral buildup. Clean the area thoroughly before installing the new stem. Ensure the seat washer at the bottom of the faucet body is clean and intact, replacing it if necessary.
- Install New Danco 10407 Stem: Insert the new Danco 10407 3S-15C Cold Stem into the faucet body, ensuring any included O-rings and washers are correctly seated. The stem should slide in smoothly.
- Reattach Packing Nut/Bonnet Nut: Screw the packing nut or bonnet nut back into place and tighten it with the adjustable wrench. Do not overtighten, as this can damage the stem or faucet body.
- Reinstall Faucet Handle: Place the faucet handle back onto the stem, secure it with its screw, and replace the decorative cap.
- ജലവിതരണം പുനഃസ്ഥാപിക്കുക: Slowly turn the water supply back on. Check for any leaks around the handle and spout.
- ടെസ്റ്റ് ഫ്യൂസെറ്റ്: Operate the cold water handle to ensure proper function and that the leak has been resolved.
ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the Danco 10407 3S-15C Cold Stem, highlighting its cartridge design for proper installation.
Image: An individual O-ring, a critical sealing component included with the faucet stem to prevent leaks.
ഓപ്പറേഷൻ
The Danco 10407 3S-15C Cold Stem functions as an internal component of your faucet. Once installed, its operation is integrated with the faucet handle. Turning the cold water handle will engage the stem to control the flow of cold water through the faucet. Proper installation ensures smooth operation and effective water flow control.
മെയിൻ്റനൻസ്
To ensure the longevity and optimal performance of your faucet stem and faucet, consider the following maintenance tips:
- പതിവ് വൃത്തിയാക്കൽ: Periodically clean the exterior of your faucet to prevent mineral buildup around the handle and spout.
- കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക: Do not use abrasive cleaners or harsh chemicals on your faucet, as these can damage the finish and potentially affect internal components over time.
- ചോർച്ച പരിശോധിക്കുക: Regularly inspect your faucet for any signs of new leaks. Addressing small drips promptly can prevent larger issues and water waste.
- ജലത്തിൻ്റെ ഗുണനിലവാരം: In areas with hard water, mineral deposits can accumulate. Consider using a water softener if mineral buildup is a recurring problem, as it can affect the lifespan of faucet components.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues after installing the Danco 10407 3S-15C Cold Stem, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Faucet still leaks after stem replacement. |
|
|
| Low water flow from cold side. |
|
|
| ഹാൻഡിൽ കട്ടിയുള്ളതോ തിരിക്കുന്നതിന് പ്രയാസമുള്ളതോ ആണ്. |
|
|
സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ഡാൻകോ |
| മോഡൽ നമ്പർ | 10407 |
| ഭാഗം നമ്പർ | 3എസ്-15സി |
| ശുപാർശ ചെയ്യുന്ന ഉപയോഗം | Fixing drips from the cold side of two-handle sink, tub, or shower faucets |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| നിറം | വെള്ള |
| ഇനത്തിൻ്റെ ഭാരം | 0.16 ഔൺസ് (ഏകദേശം 4.54 ഗ്രാം) |
| ഉൽപ്പന്ന അളവുകൾ | 0.92"D x 0.92"W x 1.96"H |
| അനുയോജ്യത | Aquasource/Glacier Bay Faucets |
| പാലിക്കൽ | Reduction of Low Lead in Drinking Water Act |
വാറൻ്റിയും പിന്തുണയും
This product comes with a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or visit the official Danco website. You may also contact Danco customer service directly for assistance with product inquiries or troubleshooting.
കൂടുതൽ വിവരങ്ങൾക്കും പിന്തുണയ്ക്കും, ദയവായി സന്ദർശിക്കുക Danco Store.
