Kw-Trio Automatic Numbering Machine 0260 User Manual

ആമുഖം

This manual provides comprehensive instructions for the safe and efficient use of your Kw-Trio Automatic Numbering Machine, model 0260. Please read this manual thoroughly before operating the device to ensure proper function and longevity. This machine is designed for precise, sequential numbering tasks in various office and administrative settings.

ഉൽപ്പന്നം കഴിഞ്ഞുview ഫീച്ചറുകളും

The Kw-Trio Automatic Numbering Machine 0260 is a robust device built for reliable performance. Its key features include:

• Automatic 6-digit numbering capability.
• Seven distinct numbering functions for versatile use.
• Constructed with a durable metal body for extended lifespan.
• Produces clear impressions with a print size of 4.5 mm.

Image: The Kw-Trio Automatic Numbering Machine 0260. It features a shiny chrome-plated metal body with a black plastic handle at the top. The front of the machine has a small window displaying 'KW-triO 02060', indicating the brand and the model number as seen on the device. Below this, the numbering mechanism is visible, designed for stamping numbers.

ഘടകങ്ങൾ

Familiarize yourself with the main components of the numbering machine:

• കൈകാര്യം ചെയ്യുക: Black plastic grip for pressing the stamp.
• Metal Body: Chrome-plated housing for the internal mechanism.
• Numbering Wheels: Internal wheels that display and print the numbers.
• ഇങ്ക് പാഡ്: Removable pad located beneath the numbering wheels, providing ink for impressions.
• Setting Levers/Pins: Mechanisms for adjusting the numbering sequence and functions (typically small levers or pins on the side or front).
• ഡിസ്പ്ലേ വിൻഡോ: Shows the current number set on the machine.

സജ്ജമാക്കുക

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the numbering machine from its packaging. Inspect for any damage.
2. Ink Pad Installation/Check: The machine typically comes with an ink pad pre-installed or separately. Ensure the ink pad is correctly seated in its compartment. If it's dry, re-ink or replace it (refer to Maintenance section).
3. പ്രാരംഭ പരിശോധന: Press the handle down firmly on a scrap piece of paper to make a test impression. This helps distribute ink evenly and confirms the machine is ready for use.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Setting the Number

1. Locate the small setting levers or pins on the side or front of the numbering mechanism.
2. Use a stylus or a thin, pointed object (like a pen tip) to push and rotate the individual numbering wheels to set your desired starting number. Ensure each digit is aligned correctly in the display window.

Selecting Numbering Functions (7 Functions)

The Kw-Trio 0260 offers 7 different numbering functions, which control how the number advances after each impression. These functions are typically selected using a small lever or dial on the side of the machine. Common functions include:

• തുടർച്ചയായി: Advances by one digit with each impression (e.g., 1, 2, 3...).
• തനിപ്പകർപ്പ്: Prints the same number twice before advancing (e.g., 1, 1, 2, 2...).
• Triplicate: Prints the same number three times before advancing (e.g., 1, 1, 1, 2, 2, 2...).
• ആവർത്തിക്കുക: Prints the same number indefinitely without advancing.
• Other functions may include 4x, 5x, 6x repeat, or specific skip functions. Refer to the markings on your specific machine for exact function descriptions.

To select a function, move the function selector lever to the desired position. Test the function on scrap paper before use.

ഒരു മതിപ്പ് ഉണ്ടാക്കുന്നു

1. Place the document or item to be stamped on a flat, stable surface.
2. Position the numbering machine over the desired stamping ഏരിയ.
3. Press the handle down firmly and evenly until the numbering mechanism makes full contact with the surface.
4. Lift the machine straight up. The number should have advanced according to the selected function.

മെയിൻ്റനൻസ്

Ink Pad Replacement/Re-inking

When impressions become faint or uneven, it's time to re-ink or replace the ink pad.

1. Gently push the front of the machine to expose the ink pad compartment.
2. Carefully slide out the old ink pad.
3. To Re-ink: Apply a few drops of Kw-Trio compatible numbering machine ink evenly onto the surface of the old pad. Do not over-ink. Allow the ink to soak in for a few minutes.
4. മാറ്റിസ്ഥാപിക്കാൻ: Insert a new, compatible ink pad into the compartment, ensuring it is seated correctly.
5. Slide the ink pad compartment back into place.
6. Make several test impressions on scrap paper to ensure even ink distribution.

വൃത്തിയാക്കൽ

• Periodically clean the numbering wheels to prevent ink buildup, which can affect impression quality.
• Use a soft brush (like an old toothbrush) and a small amount of stamp cleaner or rubbing alcohol. Gently brush the numbering wheels while rotating them.
• Wipe the exterior of the machine with a soft, dry cloth. Avoid harsh chemicals that could damage the finish.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• ബ്രാൻഡ്: Kw-Trio (Sold under Makro Paper)
• മോഡൽ നമ്പർ: 0260
• അക്കങ്ങളുടെ എണ്ണം: 6
• പ്രവർത്തനങ്ങൾ: 7 automatic numbering functions
• പ്രിൻ്റ് വലുപ്പം: 4.5 മി.മീ
• മെറ്റീരിയൽ: ലോഹവും പ്ലാസ്റ്റിക്കും
• നിറം: Silver/Chrome with Black handle
• അളവുകൾ (L x W x H): 6.5 x 4.5 x 14 സെ.മീ
• ഭാരം: 400 ഗ്രാം
• മഷി നിറം: കറുപ്പ് (സാധാരണ)
• ASIN: B005KGG80U
• International Article Code (EAN/UPC): 04714218030051

വാറൻ്റിയും പിന്തുണയും

Specific warranty information for the Kw-Trio Automatic Numbering Machine 0260 is not provided in the product details. Please refer to your point of purchase or the manufacturer's official webവാറന്റി നിബന്ധനകൾക്കും വ്യവസ്ഥകൾക്കും സൈറ്റ്.

For technical support or further assistance, please contact the retailer or the manufacturer, Kw-Trio, directly. Keep your purchase receipt and model number (0260) handy when seeking support.