1. ആമുഖവും ഉൽപ്പന്നവും കഴിഞ്ഞുview
This manual provides essential information for the safe and effective use of the Apollo APOAEYB Projector Replacement Bulb. The APOAEYB is a high-quality halogen lamp designed for various projector models, including those from Bell & Howell, Eiki, Da-lite, Buhl, and Dukane. It features 99% pure quartz glass for optimal brightness and clarity, ensuring a reliable and long-lasting light source for your projection needs.
Please read this manual thoroughly before installation and operation to ensure proper handling and to maximize the lifespan of your replacement bulb.
2 സുരക്ഷാ വിവരങ്ങൾ
നിങ്ങളുടെ സുരക്ഷയാണ് പരമപ്രധാനം. ദയവായി ഇനിപ്പറയുന്ന മുൻകരുതലുകൾ പാലിക്കുക:
- വൈദ്യുത അപകടം: Always disconnect the projector from the power outlet before attempting any installation, removal, or maintenance of the bulb. Failure to do so can result in electric shock.
- ഉയർന്ന താപനില: Projector bulbs operate at extremely high temperatures. Allow the projector and the old bulb to cool down completely (at least 30 minutes) before handling. Touching a hot bulb can cause severe burns.
- ശ്രദ്ധയോടെ കൈകാര്യം ചെയ്യുക: Do not touch the glass surface of the new bulb with bare hands. Oils from your skin can create hot spots on the bulb, leading to premature failure or even shattering. Use a clean, lint-free cloth or gloves when handling.
- Shattering Risk: While rare, bulbs can shatter if mishandled or if they fail. Wear eye protection during installation and removal. Clean up any broken glass carefully.
- ശരിയായ നീക്കം ചെയ്യൽ: Dispose of old bulbs according to local regulations. Some bulbs may contain hazardous materials.
- വെൻ്റിലേഷൻ: Ensure the projector's ventilation system is clear and unobstructed during operation to prevent overheating of the bulb and projector.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Replacing a projector bulb requires careful attention. Always refer to your specific projector's user manual for detailed, model-specific instructions. The following are general steps:
- പവർ ഓഫാക്കി വിച്ഛേദിക്കുക: Turn off your projector and unplug it from the power outlet.
- ശാന്തമാകൂ: Allow the projector and the old bulb to cool down completely. This may take 30 minutes or more.
- Locate Bulb Compartment: എൽ തിരിച്ചറിയുകamp compartment on your projector. It is usually secured by screws or a latch.
- തുറന്ന കമ്പാർട്ട്മെന്റ്: Carefully open or remove the lamp compartment cover. You may need a screwdriver.
- പഴയ ബൾബ് നീക്കം ചെയ്യുക: Gently unfasten any screws or clips holding the old lamp in place. Carefully pull out the old lamp assembly. Avoid touching the glass of the old bulb if it's still warm.
- Prepare New Bulb: Remove the new Apollo APOAEYB bulb from its packaging. Do not touch the glass part of the bulb with your bare hands. Use the protective packaging or a clean cloth to handle it.
- പുതിയ ബൾബ് ഇടുക: Carefully insert the new bulb assembly into the projector's lamp slot. Ensure it is seated firmly and correctly. Fasten any screws or clips to secure it.
- കമ്പാർട്ട്മെന്റ് അടയ്ക്കുക: എൽ മാറ്റിസ്ഥാപിക്കുകamp compartment cover and secure it with screws or latches.
- പവർ ഓൺ: Plug the projector back into the power outlet and turn it on. Reset the lamp timer in your projector's menu, if applicable.
Figure 3.1: Close-up of the Apollo APOAEYB bulb, highlighting its base and glass component for proper handling during installation.
Figure 3.2: Apollo APOAEYB bulb and its packaging. The packaging provides protection and important product information.
4. പ്രവർത്തന പരിഗണനകൾ
Once installed, the Apollo APOAEYB bulb operates automatically with your projector. To ensure optimal performance and extend bulb life:
- ശരിയായ ഷട്ട്ഡൗൺ: Always allow your projector to complete its cool-down cycle before unplugging it or moving it. Abrupt power cuts can damage the bulb.
- ഇടയ്ക്കിടെ ഓൺ/ഓഫ് സൈക്കിളുകൾ ഒഴിവാക്കുക: Turning the projector on and off frequently can reduce bulb lifespan.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Operate the projector in a well-ventilated area with stable room temperature. Extreme temperatures or humidity can affect bulb performance and longevity.
5. പരിപാലനം
Regular maintenance helps ensure the longevity and performance of your projector and its bulb:
- Bulb Cleaning: If the bulb's glass surface becomes dusty, gently wipe it with a clean, dry, lint-free cloth. Do not use liquid cleaners. Ensure the bulb is cool before cleaning.
- Projector Filter Cleaning: Regularly clean or replace your projector's air filter as per your projector's manual. A clogged filter can lead to overheating and premature bulb failure.
- സംഭരണം: If storing a spare bulb, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.
6. പ്രശ്നപരിഹാരം
If you encounter issues after installing your new bulb, consider the following:
- ബൾബ് കത്തുന്നില്ല:
- Ensure the projector is properly plugged in and receiving power.
- Verify the bulb is correctly seated and secured in its compartment.
- എൽ ആണോയെന്ന് പരിശോധിക്കുകamp compartment cover is fully closed and secured. Many projectors have a safety switch that prevents operation if the cover is open.
- Consult your projector's manual for specific error codes related to the lamp.
- Dim Image or Poor Quality:
- Check projector settings for brightness or lamp മോഡ്.
- പ്രൊജക്ടർ ലെൻസ് വൃത്തിയുള്ളതാണെന്ന് ഉറപ്പാക്കുക.
- Verify the projector's air filter is clean and not obstructing airflow.
- മിന്നുന്ന പ്രകാശം:
- Ensure the bulb is securely connected.
- This could indicate a projector issue rather than a bulb issue.
If problems persist, contact your projector manufacturer's support or a qualified service technician.
7 സ്പെസിഫിക്കേഷനുകൾ
| ആട്രിബ്യൂട്ട് | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | അപ്പോളോ |
| മോഡലിൻ്റെ പേര് | APOAEYB |
| ലൈറ്റ് തരം | ഹാലൊജെൻ |
| വാട്ട്tage | 360 വാട്ട്സ് |
| വാല്യംtage | 82 വോൾട്ട് |
| ബൾബ് ആകൃതി വലിപ്പം | PAR30 |
| ബൾബ് ബേസ് | E26 |
| മെറ്റീരിയൽ | Glass (99% pure quartz) |
| ഉൽപ്പന്ന അളവുകൾ | 1.3 x 1.4 x 2.9 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 16 cesൺസ് (1 പൗണ്ട്) |
| യു.പി.സി | 0718575302701 |
8. വാറൻ്റിയും പിന്തുണയും
Specific warranty details for the Apollo APOAEYB Projector Replacement Bulb are not provided within the product information. For warranty claims or technical support, please retain your proof of purchase and contact the retailer where the bulb was purchased or the Apollo customer service department directly.
For general inquiries or further assistance, please refer to the official Apollo webസൈറ്റ് ചെയ്യുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണ ചാനലുകളുമായി ബന്ധപ്പെടുക.
