മാനുവലുകൾ+

Alarm Controls TS-20D

TS-20D Under Desk Push Button DPDT Alternate Action

Brand: Alarm Controls

ആമുഖം

The Alarm Controls TS-20D is a robust under-desk push button designed for various control applications requiring a Double Pole Double Throw (DPDT) alternate action switch. This device is ideal for discreet installation, providing reliable latching contact closure for security, access control, or industrial automation systems.

സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all instructions before installing or operating the TS-20D. Failure to follow these instructions may result in damage to the device, property, or personal injury.

പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഇനങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

ഉൽപ്പന്നം കഴിഞ്ഞുview

Alarm Controls TS-20D Under Desk Push Button

Figure 1: Alarm Controls TS-20D Under Desk Push Button. This image shows the compact design of the push button, typically featuring a durable casing and the push button mechanism itself, designed for discreet mounting.

The TS-20D is an alternate action (latching) push button switch. This means that when the button is pressed, it latches into the "ON" position, and remains there until pressed again to return to the "OFF" position. It features Double Pole Double Throw (DPDT) contacts, providing two independent sets of Normally Open (NO) and Normally Closed (NC) contacts, allowing for versatile wiring configurations.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps for proper installation of the TS-20D:

  1. മൗണ്ടിംഗ് ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a discreet and secure location under a desk, counter, or similar surface. Ensure there is sufficient space for the button and wiring, and that the surface material can hold the mounting screws.
  2. വയറിംഗ് തയ്യാറാക്കുക: Disconnect all power to the circuit where the TS-20D will be connected. Identify the wires for your application (e.g., power, control signal, common).
  3. Mount the Button:
    • Position the TS-20D in the desired location.
    • Mark the screw hole locations using a pencil.
    • Drill pilot holes if necessary, appropriate for the mounting screws and surface material.
    • Secure the TS-20D using the provided mounting screws. Do not overtighten.
  4. Wire the Contacts: The TS-20D features DPDT contacts. Refer to the wiring diagram specific to your application.

    A DPDT switch has 6 terminals: two common (COM), two normally open (NO), and two normally closed (NC). When the button is in its default (unpressed) state, COM is connected to NC. When pressed, COM connects to NO.

    • Connect your input signal to the Common (COM) terminals.
    • Connect your output/controlled device to either the Normally Open (NO) or Normally Closed (NC) terminals, depending on whether you want the circuit to be active when the button is pressed (NO) or released (NC).
    • എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും ഇൻസുലേറ്റ് ചെയ്തതുമാണെന്ന് ഉറപ്പാക്കുക.
  5. ടെസ്റ്റ് ഓപ്പറേഷൻ: Once wiring is complete and secure, reapply power to the circuit. Test the button's functionality to ensure it operates as expected for your application.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The TS-20D is an alternate action (latching) push button. Its operation is straightforward:

The specific action (e.g., locking/unlocking a door, activating/deactivating an alarm) depends on how the DPDT contacts are wired into your system.

മെയിൻ്റനൻസ്

The TS-20D is designed for long-term, reliable operation with minimal maintenance.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Button does not latch/unlatchInternal mechanism issue or obstruction.Ensure no physical obstruction. If issue persists, the unit may be faulty and require replacement.
ബട്ടൺ അമർത്തുന്നതിനോട് ഉപകരണം പ്രതികരിക്കുന്നില്ല.Incorrect wiring, loose connections, or no power to the controlled device.Verify all wiring connections are secure and correct according to your system's diagram. Check power supply to the controlled device.
Button feels loose or wobblyഅയഞ്ഞ മൗണ്ടിംഗ് സ്ക്രൂകൾ.Tighten mounting screws. Do not overtighten.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please contact Alarm Controls directly or refer to their official webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Alarm Controls Contact Information:

അനുബന്ധ രേഖകൾ - TS-20D

പ്രീview TS-27 Request to Exit Station - ALARM CONTROLS Access Control
Detailed information on the ALARM CONTROLS TS-27 Request to Exit Station, featuring a large mushroom push button, stainless steel finish, and options for timed output. Specifications include UL 294 and CSA certifications.
പ്രീview TS-18, TS-19, TS-20 Under Desk Door Release
Alarm Controls TS-18, TS-19, and TS-20 are push button controlled under desk/counter door releases for remote control of doors and access controls. Ideal for front desk and reception or hard to wire areas requiring discreet control of locking devices.
പ്രീview TS-12, TS-13 Vandal Resistant Request to Exit Station | Alarm Controls
Alarm Controls TS-12 and TS-13 are vandal-resistant request-to-exit stations designed for commercial and industrial applications, offering secure egress with a durable push button and optional timer relay.
പ്രീview TS-32 Latching Panic Station - Alarm Controls Product Overview
Detailed specifications and features for the Alarm Controls TS-32 Latching Panic Station, a single gang emergency door release with a red mushroom button.
പ്രീview EB Series Request to Exit Egress Stations - Alarm Controls
The EB Series from Alarm Controls offers single-gang request-to-exit egress stations with momentary push-button switches. These stations remain active as long as the button is depressed and feature compatibility with most systems. Key features include a stainless steel wall plate, a 1-1/2" red mushroom button, and a screened "EXIT" plate. Options for finishes, illumination (LED in various voltages), guard rings, and lift-up covers are available. Specifications include UL and CSA certification, contacts rated 10A at 35 VDC or 120 VAC, screw terminal connections, and a switch depth of 2-1/2". The operating temperature range is -13F to +158F. The document also provides a table for ordering different configurations.
പ്രീview Alarm Controls SC628 Sonalert Buzzer and PA100 Piezo Buzzer Specifications
Detailed specifications for Alarm Controls SC628 Sonalert Buzzer and PA100 Piezo Buzzer, including features, mounting options, and electrical requirements.