AMS 5132/1

AMS 5132/1 Radio-Controlled Pendulum Wall Clock

ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

Thank you for choosing the AMS 5132/1 Radio-Controlled Pendulum Wall Clock. This clock combines classic design with modern radio-controlled technology for precise timekeeping. Crafted from walnut lacquered solid wood, it is designed for indoor use. Please read this manual carefully before setup and operation to ensure proper function and longevity of your clock.

AMS 5132/1 Radio-Controlled Pendulum Wall Clock, front view

ചിത്രം: മുൻഭാഗം view of the AMS 5132/1 Radio-Controlled Pendulum Wall Clock, showcasing its round dial, analog display, and walnut wood finish.

സുരക്ഷാ വിവരങ്ങൾ

  • ബാറ്ററികൾ കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
  • ക്ലോക്കിനെ തീവ്രമായ താപനിലയിലോ, നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിലോ, ഉയർന്ന ആർദ്രതയിലോ തുറന്നുകാട്ടരുത്.
  • Avoid using abrasive cleaners on the wood or clock face.
  • വീഴാതിരിക്കാൻ ക്ലോക്ക് സുരക്ഷിതമായി ഘടിപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
  • ഉപയോഗിച്ച ബാറ്ററികൾ പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് ഉത്തരവാദിത്തത്തോടെ നീക്കം ചെയ്യുക.

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:

  • AMS 5132/1 Radio-Controlled Pendulum Wall Clock
  • Pendulum rod and bob
  • നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

കുറിപ്പ്: ബാറ്ററികൾ ഉൾപ്പെടുത്തിയിട്ടില്ല, പ്രത്യേകം വാങ്ങണം.

സജ്ജമാക്കുക

  1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the clock and all components from the packaging. Retain packaging for future transport or storage.
  2. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ:
    • Locate the battery compartment on the back of the clock mechanism.
    • Insert the required batteries (typically 1x AA, not included) according to the polarity markings (+/-).
    • ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ അടയ്ക്കുക.
  3. പെൻഡുലം ഇൻസ്റ്റാളേഷൻ:
    • Carefully attach the pendulum rod to the hook or slot provided on the clock mechanism, usually located below the movement.
    • Ensure the pendulum hangs freely and does not touch the clock casing.
  4. Initial Time Synchronization (Radio Control):
    • Once batteries are installed, the clock hands will automatically move to the 12 o'clock position and begin searching for the radio signal. This process can take several minutes to an hour.
    • Place the clock in an area with good reception, away from electronic devices that may cause interference.
    • The clock will automatically set itself to the correct time once the signal is received.
    Close-up of a clock face showing 'RADIO CONTROLLED' text

    Image: Detail of a clock face indicating the 'RADIO CONTROLLED' feature, essential for automatic time synchronization.

  5. ക്ലോക്ക് സ്ഥാപിക്കൽ:
    • Select a suitable wall location for mounting. Ensure the wall can support the weight of the clock.
    • Use appropriate wall anchors and screws (not included) for secure installation.
    • Hang the clock securely on the wall.

പ്രവർത്തിക്കുന്നു

  1. യാന്ത്രിക സമയ സമന്വയം: The clock automatically receives a radio signal to ensure accurate timekeeping, including adjustments for Daylight Saving Time. This typically occurs once a day, usually in the early morning hours.
  2. പെൻഡുലം ചലനം: Gently push the pendulum to start its swing. It should continue to swing rhythmically as long as the clock is powered and functioning correctly.
  3. Manual Time Adjustment (if necessary): In rare cases where the radio signal is consistently weak or unavailable, some models may offer a manual adjustment button (often labeled 'SET' or 'M.SET') on the back. Refer to specific markings on your clock's mechanism. Pressing this button usually advances the minute hand. Hold to move hands quickly. Release when close to the desired time and press repeatedly for fine adjustments. The clock will attempt to resynchronize with the radio signal after manual adjustment.

മെയിൻ്റനൻസ്

  • വൃത്തിയാക്കൽ: Wipe the wood casing with a soft, dry cloth. For the clock face, use a clean, lint-free cloth. Do not use harsh chemicals or abrasive materials.
  • ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries annually or when the clock hands stop moving or the pendulum stops swinging. Always replace all batteries at the same time with new ones of the same type.
  • പൊതു പരിചരണം: Avoid placing the clock in areas with extreme temperature fluctuations or high humidity, as this can affect the wood and the clock mechanism.

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ക്ലോക്ക് പ്രവർത്തിക്കുന്നില്ല.ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ചേർത്ത ബാറ്ററികൾബാറ്ററികൾ മാറ്റി സ്ഥാപിക്കുക, ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കുക.
തെറ്റായ സമയം പ്രദർശിപ്പിച്ചിരിക്കുന്നുPoor radio signal receptionMove the clock to a different location, away from electronic interference. Allow time for re-synchronization.
Pendulum not swingingPendulum not properly installed or obstructedEnsure the pendulum is correctly hooked and swings freely without touching the casing. Gently push to start.
Clock loses time or gains timeWeak radio signal or battery issueCheck battery strength. Relocate the clock for better signal reception.

സ്പെസിഫിക്കേഷനുകൾ

  • ബ്രാൻഡ്: എ.എം.എസ്
  • മോഡൽ നമ്പർ: 5132/1
  • നിറം: വാൽനട്ട്
  • മെറ്റീരിയൽ: മരം
  • ഡിസ്പ്ലേ തരം: അനലോഗ്
  • ശൈലി: ക്ലാസിക്
  • രൂപം: വൃത്താകൃതി
  • ഉപയോഗം: ഇൻഡോർ
  • ഫ്രെയിം മെറ്റീരിയൽ: മരം
  • ബാറ്ററികൾ ഉൾപ്പെടുന്നു: ഇല്ല
  • മൗണ്ടിംഗ് തരം: മതിൽ മൗണ്ട്

വാറൻ്റിയും പിന്തുണയും

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official AMS webകൂടുതൽ സഹായത്തിനുള്ള സൈറ്റ്.

അനുബന്ധ രേഖകൾ - 5132/1

പ്രീview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
പ്രീview AMS വാൾ ക്ലോക്ക് പ്രവർത്തന നിർദ്ദേശങ്ങൾ
AMS വാൾ ക്ലോക്കുകൾക്കുള്ള പ്രവർത്തന നിർദ്ദേശങ്ങൾ, ബാറ്ററി ഇൻസ്റ്റാളേഷൻ, മാറ്റിസ്ഥാപിക്കൽ, പൊതുവായ ഉപയോഗം എന്നിവ ഒന്നിലധികം ഭാഷകളിൽ ഉൾക്കൊള്ളുന്നു.
പ്രീview ams AS5600L അഡാപ്റ്റർ ബോർഡ് Eval കിറ്റ് ഉപയോക്തൃ മാനുവൽ
കിറ്റ് ഉള്ളടക്കങ്ങൾ, ബോർഡ് വിവരണം, മൗണ്ടിംഗ് നിർദ്ദേശങ്ങൾ, പിൻഔട്ട് വിശദാംശങ്ങൾ, I2C മോഡ് പ്രവർത്തനം, ഹാർഡ്‌വെയർ സ്കീമാറ്റിക്സ്, PCB ലേഔട്ട്, ഓർഡർ വിവരങ്ങൾ എന്നിവയുൾപ്പെടെ ams AS5600L-WL_EK_AB അഡാപ്റ്റർ ബോർഡിനെക്കുറിച്ചുള്ള സമഗ്രമായ വിവരങ്ങൾ ഈ മാനുവൽ നൽകുന്നു.
പ്രീview ams AS5048 14-ബിറ്റ് റോട്ടറി പൊസിഷൻ സെൻസർ യൂസർ മാനുവൽ
ഡിജിറ്റൽ ആംഗിളും PWM ഔട്ട്‌പുട്ടും ഉള്ള 14-ബിറ്റ് റോട്ടറി പൊസിഷൻ സെൻസറായ ams AS5048 നെക്കുറിച്ചുള്ള വിശദമായ വിവരങ്ങൾ ഈ ഉപയോക്തൃ മാനുവൽ നൽകുന്നു. ഇത് AS5048 അഡാപ്റ്റർ ബോർഡ്, മൗണ്ടിംഗ്, പിൻഔട്ട്, ഓപ്പറേഷൻ കേസുകൾ (SPI, ഡെയ്‌സി ചെയിൻ), ഫേംവെയർ കോഡിംഗ് എക്സ് എന്നിവ ഉൾക്കൊള്ളുന്നു.ampലെസ്, ഹാർഡ്‌വെയർ സ്കീമാറ്റിക്സ്. ഈ സെൻസർ അവരുടെ സിസ്റ്റങ്ങളിൽ സംയോജിപ്പിക്കുന്ന എഞ്ചിനീയർമാർക്ക് അത്യാവശ്യമാണ്.
പ്രീview ams AS5048 അഡാപ്റ്റർ ബോർഡ് ഇവാലുവേഷൻ കിറ്റ് മാനുവൽ
This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
പ്രീview ams AS5048 Adapter Board Evaluation Kit Manual | AS5048-EK-AB
Explore the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. This manual provides essential details on features, SPI/I2C interfaces, hardware, and software examples for efficient engineering development.