Kerbl P100 Willow Pump Instruction Manual

ആമുഖം

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Kerbl P100 Willow Pump. The P100 is a robust pasture pump designed to provide fresh and clean water for animals, drawing water from depths of up to 8 meters. Its design features an aluminum lever and smooth-mounted pivot points for extremely smooth operation, and a sturdy cast iron drinking bowl.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Please read all safety instructions carefully before installing or operating the pump. Failure to follow these instructions may result in injury or damage to the product.

• Ensure the pump is installed on a stable, level surface to prevent tipping.
• പ്രവർത്തന സമയത്ത് കൈകളും അയഞ്ഞ വസ്ത്രങ്ങളും ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Do not allow children or untrained individuals to operate the pump.
• Regularly inspect the pump for any signs of wear or damage. Do not operate if damaged.
• Ensure proper connection of all pipes and hoses to prevent leaks.

ഘടകങ്ങൾ പൂർത്തിയായിview

The Kerbl P100 Willow Pump consists of several key components designed for durability and efficient water delivery.

ചിത്രം 1: പൊട്ടിത്തെറിച്ചു view of the Kerbl P100 Willow Pump, illustrating the various components and their arrangement for assembly and maintenance.

Figure 2: Internal mechanism of the Kerbl P100 Willow Pump, highlighting the lever, piston, and valve system responsible for water suction and delivery.

പ്രധാന ഘടകങ്ങൾ:

• പമ്പ് ബോഡി: The main housing, typically made of cast iron, containing the pumping mechanism.
• Lever Arm: The aluminum handle used to operate the pump, providing leverage for water extraction.
• Piston/Diaphragm: Internal component responsible for creating suction and pushing water.
• വാൽവുകൾ: Inlet and outlet valves that control water flow direction.
• Drinking Bowl: The cast iron basin where water collects for animals to drink.
• കണക്ഷൻ പോർട്ട്: For attaching the suction pipe (3/4 inch connection).

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the optimal performance and longevity of your Kerbl P100 Willow Pump.

സൈറ്റ് തിരഞ്ഞെടുക്കൽ:

• Choose a firm, level, and stable surface for installation, preferably concrete or a reinforced base.
• Ensure the location is easily accessible for animals and for maintenance.
• The water source (well, pond, etc.) should be within 8 meters vertical depth from the pump's location.

പമ്പ് മൌണ്ട് ചെയ്യുന്നു:

1. Position the pump on the chosen surface.
2. Mark the drilling points using the pump's base holes. The hole spacing for mounting is 425 x 260 mm.
3. Drill appropriate holes for anchor bolts (not supplied).
4. Securely fasten the pump to the surface using suitable anchor bolts.

ജല ലൈനുകൾ ബന്ധിപ്പിക്കുന്നു:

1. Connect a suction pipe to the pump's inlet port. The pump is suitable for pipe and hose connections with an inner diameter of 19-25 mm (3/4 to 1 inch).
2. Ensure all connections are airtight to prevent loss of prime. Use appropriate sealants or thread tape.
3. Extend the suction pipe into the water source, ensuring the end is submerged but not resting on the bottom to avoid drawing sediment.

Figure 3: Dimensional drawing of the Kerbl P100 Willow Pump, showing overall dimensions and mounting hole spacing for installation planning.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Kerbl P100 Willow Pump is designed for simple and effective operation.

പമ്പ് പ്രൈമിംഗ്:

Before first use or if the pump loses its prime, it may need to be primed:

1. Locate the priming port (if available) or the top opening of the pump.
2. Pour clean water into the pump until the chamber is full.
3. Operate the lever arm slowly several times to help draw water up the suction pipe.
4. Repeat if necessary until water flows consistently from the drinking bowl.

സാധാരണ പ്രവർത്തനം:

1. Ensure the drinking bowl is clear of debris.
2. Grasp the lever arm firmly.
3. Pump the lever arm up and down with a steady, full stroke.
4. Each stroke delivers approximately 0.6 liters of water (depending on suction depth).
5. Continue pumping until the desired amount of fresh water is in the drinking bowl.

Figure 4: The Kerbl P100 Willow Pump, illustrating its robust design and ready state for manual water pumping.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and efficient performance of your pump.

പ്രതിദിന/പ്രതിവാര അറ്റകുറ്റപ്പണികൾ:

• Clean Drinking Bowl: Regularly clean the cast iron drinking bowl to prevent algae growth and ensure fresh water for animals.
• ചോർച്ച പരിശോധിക്കുക: Inspect all connections for any signs of water leaks. Tighten connections as needed.
• അവശിഷ്ടങ്ങൾ മായ്‌ക്കുക: Ensure the suction pipe inlet is free from debris that could block water flow.

Monthly/Seasonal Maintenance:

• ലൂബ്രിക്കേഷൻ: Apply a suitable, food-grade lubricant to the pivot points of the lever arm to ensure smooth operation and prevent wear.
• Inspect Internal Components: Periodically check the piston/diaphragm and valves for wear or damage. Replace if necessary. Refer to the exploded view ഘടകം തിരിച്ചറിയുന്നതിനുള്ള ഡയഗ്രം.
• ശീതകാലം (ബാധകമെങ്കിൽ): In freezing climates, drain the pump completely to prevent damage from ice expansion. Disconnect the suction pipe and allow all water to escape.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with your Kerbl P100 Willow Pump.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or to order replacement parts, please contact KERBL customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.

നിർമ്മാതാവ്: ആൽബർട്ട് കെർബ്ൾ ജിഎംബിഎച്ച്

For further assistance, please visit the official KERBL webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക വിതരണക്കാരനെ സമീപിക്കുക.