Detex V Series Exit Trim Instruction Manual

1. ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Detex V Series Grade 1 Exit Trim. This product is designed for use with Detex V40/V50 Series Exit Devices, featuring a Classroom function with an S Lever and a Sprayed Aluminum Finish. It is non-handed, allowing for versatile installation.

Please read all instructions carefully before beginning installation or operation to ensure proper function and safety.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

Figure 2.1: Detex V Series Exit Trim, showing the S lever and the rectangular escutcheon plate in a sprayed aluminum finish. The trim is designed to integrate with Detex V40/V50 Series Exit Devices.

The Detex V Series Exit Trim is a robust component designed to provide secure and reliable access control for doors equipped with Detex V40/V50 Series Exit Devices. Its non-handed design simplifies installation, making it suitable for both left-hand and right-hand door applications. The classroom function allows the exterior lever to be locked or unlocked by key, while the interior always allows free egress.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the functionality and security of the exit trim. Refer to the specific installation instructions provided with your Detex V40/V50 Series Exit Device for complete details, as this trim is an accessory to that device.

3.1. ആവശ്യമായ ഉപകരണങ്ങൾ

• Screwdriver set (Phillips and Flathead)
• അളക്കുന്ന ടേപ്പ്
• Drill (if new holes are required)
• പെൻസിൽ അല്ലെങ്കിൽ മാർക്കർ

3.2. പ്രീ-ഇൻസ്റ്റലേഷൻ പരിശോധനകൾ

1. Verify that all components listed in the packaging are present.
2. Ensure the door preparation (bore holes, mortise) matches the requirements for the Detex V40/V50 Series Exit Device and this trim.
3. Confirm the handing of the door and the non-handed nature of the trim.

3.3 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. Attach the exterior trim assembly to the door, aligning it with the prepared holes for the exit device.
2. Secure the trim using the provided fasteners, ensuring it is flush against the door surface. Do not overtighten.
3. Install the spindle or cam through the door and into the exit device mechanism, ensuring proper engagement with the lever.
4. Test the lever operation to confirm smooth movement and proper retraction of the latch bolt when the exit device is engaged.
5. If a cylinder is to be added (this model is less cylinder), ensure the cylinder preparation is correct and the cylinder operates the locking mechanism smoothly.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Detex V Series Exit Trim with Classroom function provides controlled access from the exterior while maintaining free egress from the interior.

4.1. Exterior Operation (Classroom Function)

• അൺലോക്ക് ചെയ്യാൻ: Insert the correct key into the cylinder (if installed) and turn to retract the latch bolt. The exterior lever will then operate freely.
• ലോക്ക് ചെയ്യാൻ: Insert the correct key into the cylinder (if installed) and turn to engage the locking mechanism. The exterior lever will become rigid and will not retract the latch bolt.
• When the exterior lever is locked, entry is restricted.

4.2. Interior Operation

• From the interior, the exit device always allows free egress. Pushing the push bar or operating the interior lever (if applicable to the exit device) will retract the latch bolt, allowing the door to open, regardless of the exterior lock status.

5. പരിപാലനം

Regular maintenance ensures the longevity and reliable operation of your Detex V Series Exit Trim.

5.1. വൃത്തിയാക്കൽ

• മൃദുവായ, ഡി ക്ലീനർ ഉപയോഗിച്ച് പുറംഭാഗം വൃത്തിയാക്കുക.amp തുണി.
• Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the sprayed aluminum finish.

5.2. ലൂബ്രിക്കേഷൻ

• Periodically apply a small amount of silicone-based lubricant to the moving parts of the lever mechanism and the spindle.
• Do not lubricate the cylinder mechanism unless specifically recommended by a locksmith or the cylinder manufacturer.

5.3. പരിശോധന

• Regularly inspect the trim for any signs of wear, damage, or loose fasteners.
• Ensure all screws are tight. If any are loose, gently tighten them.
• Check the lever for smooth operation and ensure it returns to its original position without sticking.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your Detex V Series Exit Trim.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Detex customer support or a qualified locksmith.

7 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ നമ്പർ: 08BN 689
• ഉൽപ്പന്ന തരം: ട്രിമ്മിൽ നിന്ന് പുറത്തുകടക്കുക
• പരമ്പര: വി സീരീസ്
• ഗ്രേഡ്: 1
• പ്രവർത്തനം: Classroom (S Lever)
• അനുയോജ്യത: Detex V40/V50 Series Exit Devices
• സിലിണ്ടർ: Less Cylinder (requires separate purchase and installation of compatible cylinder)
• പൂർത്തിയാക്കുക: Sprayed Aluminum
• കൈമാറ്റം: കൈകളില്ലാത്തത്
• മെറ്റീരിയൽ: അലുമിനിയം
• പാക്കേജ് അളവുകൾ: 6.63 x 4.63 x 1.13 ഇഞ്ച്
• ഇനത്തിൻ്റെ ഭാരം: 3.3 പൗണ്ട്
• നിർമ്മാതാവ്: ഡിറ്റെക്സ്
• ആദ്യം ലഭ്യമായ തീയതി: ഫെബ്രുവരി 12, 2012

8. വാറൻ്റി വിവരങ്ങൾ

Detex products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions applicable to the Detex V Series Exit Trim, please refer to the warranty documentation included with your original Detex V40/V50 Series Exit Device or visit the official Detex webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

9. ഉപഭോക്തൃ പിന്തുണ

For technical assistance, replacement parts, or further inquiries regarding your Detex V Series Exit Trim, please contact Detex customer support.

Detex Corporation
Contact information typically found on the manufacturer's official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ്.

When contacting support, please have your product model number (08BN 689) and purchase date available.