1. ആമുഖം
The Polar H7 Heart Rate Sensor is designed to provide accurate, real-time heart rate data for your training sessions. It utilizes Bluetooth Smart technology to connect with compatible mobile training applications and GymLink technology for connection with compatible gym equipment. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Polar H7 sensor.
ചിത്രം: മുൻഭാഗം view of the Polar H7 Heart Rate Sensor and its soft fabric chest strap.
2. ബോക്സിൽ എന്താണുള്ളത്?
Your Polar H7 Heart Rate Sensor package includes:
- Polar H7 Bluetooth Smart Heart Rate Sensor
- Soft Fabric Chest Strap (Medium/XX-Large)
- Replaceable Lithium Metal Battery (CR2025, pre-installed)
3. സജ്ജീകരണം
3.1 Wearing the Sensor
For accurate heart rate measurement, proper placement of the sensor is crucial:
- Moisten the electrode areas on the back of the strap with water. These are the two ribbed sections on the inside of the strap.
- Attach the connector module to the strap. Ensure the two snaps are securely fastened.
- Wrap the strap around your chest, just below your pectoral muscles. The heart rate sensor should be worn flat against the skin with the Polar logo in the upright position, centered on your chest.
- Adjust the strap length to ensure a snug but comfortable fit. It should not be too tight or too loose.
Image: A person demonstrating the correct way to put on the Polar H7 Heart Rate Sensor.
3.2 പ്രാരംഭ ജോടിയാക്കൽ
The Polar H7 sensor uses Bluetooth Smart for connectivity. It pairs with applications, not directly with your phone's Bluetooth settings.
- With Mobile Apps: Open your preferred compatible training app (e.g., Polar Beat, Polar Flow, RunKeeper, Runtastic, MapMyFitness). Navigate to the app's settings or sensor pairing menu. Ensure Bluetooth is enabled on your mobile device. The app will typically detect the H7 sensor automatically when it's worn correctly. Follow the on-screen prompts within the app to complete the pairing process.
- With Gym Equipment: The H7 sensor also supports GymLink technology. Look for compatible gym equipment (treadmills, ellipticals, etc.) that display the Polar logo or indicate heart rate monitor compatibility. Simply wear your H7 sensor, and the equipment should automatically detect your heart rate.
4. സെൻസർ പ്രവർത്തിപ്പിക്കൽ
Once paired, the Polar H7 sensor will continuously transmit your heart rate data to your connected device or gym equipment. Ensure your mobile device is within range (typically up to 10 meters) for consistent data transmission.
Image: A person wearing the Polar H7 Heart Rate Sensor during a workout session.
5. പരിപാലനം
5.1 വൃത്തിയാക്കൽ
Proper cleaning extends the lifespan of your sensor and strap:
- After every use, detach the connector module from the strap.
- ഒഴുകുന്ന വെള്ളത്തിനടിയിൽ സ്ട്രാപ്പ് കഴുകുക.
- Hang the strap to dry.
- When needed, hand wash the strap gently with a mild soap and water solution. Avoid moisturizing soaps.
- സ്ട്രാപ്പ് കുതിർക്കരുത്, ഇരുമ്പ്, ഡ്രൈ ക്ലീൻ അല്ലെങ്കിൽ ബ്ലീച്ച് ചെയ്യരുത്.
- സ്ട്രാപ്പ് നീട്ടുകയോ ഇലക്ട്രോഡ് പ്രദേശങ്ങൾ കുത്തനെ വളയ്ക്കുകയോ ചെയ്യരുത്.
5.2 സംഭരണം
Store your Polar H7 sensor properly to maximize battery life and prevent damage:
- Store the heart rate sensor strap and the connector module separately.
- Keep the heart rate sensor in a cool, dry place.
- To prevent snap oxidation, do not store the heart rate sensor wet in non-breathable material.
- Do not expose the heart rate sensor to direct sunlight for extended periods.
5.3 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ
The Polar H7 sensor uses a user-replaceable CR2025 Lithium Metal battery.
ചിത്രം: പിന്നിലേക്ക് view of the Polar H7 Heart Rate Sensor module, showing the battery compartment cover.
ബാറ്ററി മാറ്റിസ്ഥാപിക്കാൻ:
- Use a narrow key or coin to turn the battery cover counter-clockwise until it loosens.
- പഴയ ബാറ്ററി ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
- Insert the new CR2025 battery with the positive (+) side facing upwards.
- Align the battery cover and turn it clockwise until it is securely closed. Ensure the O-ring seal is properly seated to maintain water resistance.
6. പ്രശ്നപരിഹാരം
6.1 കണക്റ്റിവിറ്റി പ്രശ്നങ്ങൾ
- No Signal/Intermittent Connection:
- സ്ട്രാപ്പിലെ ഇലക്ട്രോഡ് ഭാഗങ്ങൾ ആവശ്യത്തിന് ഈർപ്പമുള്ളതാണെന്ന് ഉറപ്പാക്കുക.
- Verify the sensor module is securely snapped onto the strap.
- Check that the strap is snug against your skin and positioned correctly on your chest.
- Confirm Bluetooth is enabled on your mobile device.
- Close and restart the training application.
- Try turning your mobile device's Bluetooth off and on again.
- Reboot your mobile device.
- Check the battery level of the H7 sensor. A low battery can cause connectivity issues.
- ആപ്പുമായി ജോടിയാക്കുന്നതിൽ ബുദ്ധിമുട്ട്: Remember to pair the sensor within the app itself, not through your phone's general Bluetooth settings.
6.2 Inaccurate Heart Rate Readings
- Ensure the strap electrodes are moist and making good contact with your skin.
- Verify the sensor is worn correctly, centered on your chest with the Polar logo upright.
- Excessive movement or loose strap can cause inaccurate readings. Adjust the strap for a snug fit.
- Check for any strong electromagnetic interference in your environment.
7 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ നമ്പർ: 92053178
- ഉൽപ്പന്ന അളവുകൾ: 2 x 1 x 3 cm (Sensor module)
- ഇനത്തിൻ്റെ ഭാരം: 125 g (Sensor and strap)
- ബാറ്ററി തരം: 1 x CR2025 ലിഥിയം മെറ്റൽ (ഉൾപ്പെടുത്തിയിരിക്കുന്നു)
- നിറം: കറുപ്പ്
- വലിപ്പം: Medium/XX-Large (Strap)
- പ്രത്യേക സവിശേഷതകൾ: Bluetooth Heart Rate Sensor, Waterproof, GPS Capability (via connected device)
- കണക്റ്റിവിറ്റി: Bluetooth Smart, GymLink
8. വാറൻ്റിയും പിന്തുണയും
The Polar H7 Heart Rate Sensor comes with a limited two-year manufacturer's warranty. For detailed warranty information, product support, or to purchase replacement parts, please visit the official Polar website or contact Polar customer service.
നിർമ്മാതാവ്: പോളാർ
Webസൈറ്റ്: www.polar.com
