ആമുഖം
This manual provides comprehensive instructions for the safe and effective use of your Aetertek AT-918C remote dog training system. Designed for training one or two dogs, this system offers vibration, sound, and static correction modes to assist in modifying undesirable behaviors such as barking, digging, jumping, or running away. The receiver collar is 100% waterproof and submersible, making it suitable for various outdoor training environments.
പാക്കേജ് ഉള്ളടക്കം
- AT-918C Remote Transmitter
- Two Waterproof Receiver Collars with built-in rechargeable batteries
- Charger with US plug
- Two High-quality Adjustable PU Dog Collars
- Test Bulb and Metal Prongs (pre-installed)
- ഉപയോക്തൃ മാനുവൽ
- Hand-Carry Bag
ഘടകങ്ങൾ പൂർത്തിയായിview
വിദൂര ട്രാൻസ്മിറ്റർ
The remote transmitter allows you to control the receiver collars. It features dedicated buttons for vibration, sound, and static correction, along with controls for adjusting intensity levels and selecting between Dog 1 and Dog 2 modes.
റിസീവർ കോളർ
The receiver collar is worn by your dog and delivers the training stimuli. It is designed to be 100% waterproof and submersible, making it suitable for various environments. It includes contact points (prongs) for static correction and a magnetic induction power switch for reliable operation.
സജ്ജമാക്കുക
ഉപകരണങ്ങൾ ചാർജ് ചെയ്യുന്നു
Before initial use, fully charge both the remote transmitter and the receiver collars. Connect the charger to the designated charging ports on each device. An indicator light will typically illuminate to show the charging status.
Attaching the Collar
Ensure the receiver collar is fitted snugly on your dog's neck, with the contact points making consistent contact with the skin. The collar should be tight enough to prevent movement, but loose enough to allow two fingers to fit comfortably between the strap and your dog's neck. An improper fit can lead to inconsistent correction or potential skin irritation.
Testing the Static Correction
Use the provided test bulb to verify the static correction function. Place the test bulb over the metal contact points on the receiver collar. Activate the static correction from the transmitter. The test bulb should light up, indicating the function is operational.
സിസ്റ്റം പ്രവർത്തിപ്പിക്കുന്നു
പവർ ഓൺ/ഓഫ്
The receiver collar features a magnetic induction power switch. Use the remote transmitter to activate or deactivate the collar. Refer to the specific instructions for your transmitter model for this operation.
പരിശീലന മോഡുകൾ
- വൈബ്രേഷൻ: Delivers a distinct vibration to get your dog's attention.
- ശബ്ദം: Emits an audible beep. The intensity, or number of beeps, is adjustable across 9 levels.
- സ്റ്റാറ്റിക് തിരുത്തൽ: Delivers a mild static pulse. The intensity and duration are adjustable across 9 progressive levels. Always start with the lowest effective level.
Adjusting Intensity Levels
Use the designated buttons on the transmitter to adjust the intensity levels for both sound and static correction. It is crucial to begin training with the lowest effective level and only increase gradually if your dog does not respond.
Auto Anti-Bark Function
The AT-918C includes an automatic anti-bark function that can be toggled ON or OFF. When enabled, the collar will automatically deliver a correction when it detects your dog barking. Consult your specific transmitter instructions for activating and deactivating this feature.
പ്രവർത്തന ശ്രേണി
The system has an effective operational range of up to 600 yards (approximately 550 meters). The signal is designed to pass through common obstacles such as walls and fences, providing flexibility in training environments.
മെയിൻ്റനൻസ്
വൃത്തിയാക്കൽ
Regularly clean the receiver collar and its contact points with a damp cloth. Ensure the contact points are free of dirt, debris, and hair buildup to maintain proper functionality and prevent skin irritation.
ബാറ്ററി കെയർ
The receiver collars feature built-in rechargeable Lithium Polymer batteries. Charge them regularly to ensure optimal performance and longevity. Avoid fully depleting the batteries for extended periods, as this can reduce their lifespan.
Collar Strap Inspection
Periodically inspect the PU collar strap for any signs of wear, fraying, or damage. Replace the strap if it shows significant wear to ensure a secure and reliable fit on your dog.
ട്രബിൾഷൂട്ടിംഗ്
Collar Not Responding
- Verify that both the remote transmitter and the receiver collar are powered on.
- Ensure all devices are fully charged.
- Confirm that the transmitter is set to control the correct dog (Dog 1 or Dog 2).
- Check if the collar is within the operational range of the transmitter.
Inconsistent Static Correction
- Ensure the contact points are making proper, consistent contact with your dog's skin. The collar should be snug, but not overly tight.
- Inspect for any dirt, debris, or excessive hair buildup around the contact points that might impede conductivity.
- Test the static correction function using the provided test bulb to confirm it is working.
Auto Anti-Bark Function Issues
- Verify that the auto anti-bark function is enabled if you intend to use it.
- If the collar is triggering without barking or failing to trigger when barking occurs, adjust the sensitivity settings according to the specific instructions for this feature.
ഹ്രസ്വ ബാറ്ററി ലൈഫ്
- Ensure both the transmitter and receiver collars are fully charged before each use.
- Battery life can vary significantly based on the frequency of use and the intensity levels of the training modes.
- Over time, rechargeable batteries may experience a natural reduction in capacity.
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: എടി-918 സി
- Training System: Supports 1-dog or 2-dog configurations
- പരിശീലന മോഡുകൾ: Vibration, Sound (9 adjustable levels), Static Correction (9 progressive adjustable levels)
- പ്രവർത്തന ശ്രേണി: Up to 600 yards (approx. 550 meters)
- റിസീവർ കോളർ: 100% Waterproof and Submersible, Rechargeable
- Anti-Bark Function: Automatic Anti-Bark (ON/OFF switchable)
- ഇതിന് അനുയോജ്യം: ഇടത്തരം മുതൽ വലിയ വരെ നായ്ക്കൾ
- ബാറ്ററികൾ: Lithium Polymer (for receiver collars)
- ഇനത്തിൻ്റെ ഭാരം (പാക്കേജ്): 1.37 പൗണ്ട്
- ഉൽപ്പന്ന അളവുകൾ (പാക്കേജ്): 8.9 x 7.4 x 1.7 ഇഞ്ച്
- മെറ്റീരിയൽ: Polyester (collar strap)
വാറൻ്റിയും പിന്തുണയും
This Aetertek AT-918C product is covered by a 1-year warranty. For technical support, warranty claims, or any further assistance, please contact your authorized retailer or the manufacturer directly. Please retain your purchase receipt as proof of purchase for warranty validation.
