ഗെവിസ് സിഇഇ വാൾ സോക്കറ്റ് IP67 90° 3P+N+T 125A 400V ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of the Gewiss GW62535 CEE Wall Socket. This product is an IP67 rated industrial connector, specifically designed for demanding environments and high-current applications, featuring a 3P+N+T (3-phase + Neutral + Earth) configuration, rated for 125 Amperes at 400 Volts. Please read this manual thoroughly before proceeding with any installation or use.

സുരക്ഷാ വിവരങ്ങൾ

WARNING: Electrical installation and maintenance should only be performed by qualified personnel. Failure to follow these instructions can result in serious injury, electric shock, fire, or property damage.

• Always disconnect power at the main circuit breaker or fuse box before installing, servicing, or removing the socket.
• വോളിയം എന്ന് ഉറപ്പാക്കുകtage and current ratings of the power supply match the specifications of the GW62535 socket (400V, 125A).
• Verify proper grounding (Earth connection) to prevent electric shock.
• Do not use the socket if it appears damaged or if any parts are missing.
• Protect the socket from mechanical impact and unauthorized access.
• The IP67 rating ensures protection against dust and temporary immersion in water. However, do not intentionally submerge the socket or expose it to high-pressure water jets.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Gewiss GW62535 is a robust CEE wall-mounted socket designed for industrial environments. Its key features include:

• തരം: CEE Wall Socket, fixed, 90° parallel entry.
• കോൺഫിഗറേഷൻ: 3P+N+T (3-phase, Neutral, Earth).
• നിലവിലെ റേറ്റിംഗ്: 125 Ampഈറസ്.
• വാല്യംtagഇ റേറ്റിംഗ്: 400 വോൾട്ട്.
• IP റേറ്റിംഗ്: IP67 (Dust tight and protected against temporary immersion in water).
• മെറ്റീരിയൽ: High-quality, durable plastic for industrial use.

Figure 1: Gewiss GW62535 CEE wall socket, highlighting its robust construction and angled design for industrial applications.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the Gewiss GW62535 CEE Wall Socket requires adherence to local electrical codes and safety regulations. It must be installed by a qualified electrician.

1. തയ്യാറാക്കൽ:
   • Ensure the power supply is completely disconnected.
   • Gather necessary tools: screwdriver set, wire strippers, crimping tool (if required), mounting hardware, drill.
   • Select a suitable mounting location that is flat, stable, and protected from excessive mechanical stress.
2. Mounting the Socket:
   • Open the socket housing by unscrewing the retaining screws.
   • Position the socket base on the chosen wall surface.
   • മൗണ്ടിംഗ് സ്ക്രൂകൾക്കുള്ള ഡ്രില്ലിംഗ് പോയിന്റുകൾ അടയാളപ്പെടുത്തുക.
   • Drill pilot holes if necessary and secure the socket base firmly to the wall using appropriate screws and anchors.
3. വയറിംഗ് കണക്ഷനുകൾ:
   • Route the power cable into the socket housing through the designated cable entry point. Ensure the cable gland provides a secure, watertight seal to maintain the IP67 rating.
   • Strip the outer sheath and individual wire insulation to the appropriate lengths.
   • Connect the wires to the corresponding terminals:
     • L1, L2, L3: Phase conductors (typically brown, black, grey).
     • N: Neutral conductor (typically blue).
     • PE (Earth): Protective Earth conductor (green/yellow).
   • Ensure all terminal screws are tightened securely to prevent loose connections and overheating.
4. അന്തിമ അസംബ്ലി:
   • എല്ലാ കണക്ഷനുകളും ശരിയാണെന്നും സുരക്ഷിതമാണെന്നും ഉറപ്പാക്കുക.
   • Close the socket housing, ensuring the gasket is properly seated to maintain the IP67 seal.
   • Tighten the retaining screws evenly.
5. പരിശോധന:
   • Before restoring power, perform continuity and insulation resistance tests as per local regulations.
   • Restore power and test the socket with a suitable load.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Gewiss GW62535 CEE Wall Socket is designed for straightforward operation with compatible CEE plugs.

1. Connecting a Plug:
   • Ensure the plug is clean and free from debris.
   • Align the keyway on the plug with the corresponding keyway on the socket.
   • Insert the plug firmly into the socket until it clicks or is fully seated.
   • For some plugs, a locking ring may need to be twisted to secure the connection.
2. Disconnecting a Plug:
   • If a locking ring is present, twist it to unlock the plug.
   • Grasp the plug body firmly and pull it straight out of the socket. Do not pull by the cable.
   • Avoid disconnecting under load if possible, especially with high-current applications, to prevent arcing and wear.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and safe operation of your Gewiss GW62535 CEE Wall Socket.

• ആനുകാലിക പരിശോധന: Visually inspect the socket regularly for any signs of damage, cracks, discoloration, or loose parts. Check the cable entry for secure sealing.
• വൃത്തിയാക്കൽ: Clean the exterior of the socket with a damp cloth. Do not use abrasive cleaners or solvents that could damage the plastic. Ensure the socket is dry before use.
• ടെർമിനൽ പരിശോധന: Periodically (e.g., annually or as per site requirements), with power disconnected, open the housing and check that all terminal screws are tight. Loose connections can cause overheating and fire hazards.
• ഗാസ്കറ്റ് സമഗ്രത: Ensure the sealing gasket between the housing parts is intact and properly seated to maintain the IP67 rating. Replace if damaged.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with the Gewiss GW62535 CEE Wall Socket.

If troubleshooting steps do not resolve the issue, contact a qualified electrician or Gewiss customer support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

Specific warranty information for the Gewiss GW62535 CEE Wall Socket is not provided in the product data. For warranty details, please refer to the documentation included with your purchase or contact your point of sale. For technical support or further assistance, please contact Gewiss customer service or visit the official Gewiss webസൈറ്റ്.

Gewiss Official Webസൈറ്റ്: www.gewiss.com