1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The OSMO One Coat Only HS-Plus is a high-quality, transparent, satin-matte, and microporous wood finish designed for both exterior and interior applications. This product is formulated to be water-repellent, control moisture, and effectively reduce wood swelling and shrinkage. Its unique composition allows for optimum surface protection and a lasting finish with just a single thin coat.
പ്രധാന സവിശേഷതകൾ:
- Requires only one coat for effective protection.
- Provides weather-proof and UV-resistant properties.
- Formulated with a minimal amount of solvent.
- Resistant to cracking, flaking, peeling, or blistering.
- Offers excellent coverage: approximately 275 sq ft per liter.
Image 1.1: A 2.5-liter can of OSMO One Coat Only HS-Plus wood finish in FIR Green. The label highlights its "One Coat Only" feature and suitability for exterior and interior use.
2 സുരക്ഷാ വിവരങ്ങൾ
Always prioritize safety when working with wood finishes. Adhere to the following guidelines:
- വെൻ്റിലേഷൻ: Ensure adequate ventilation during application and drying. Work in a well-ventilated area or outdoors.
- വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE): Wear appropriate gloves (e.g., nitrile or chemical-resistant) and eye protection (safety glasses or goggles) to prevent skin and eye contact.
- ശ്വസനം: Avoid prolonged breathing of vapors. If working in confined spaces, use a respirator.
- ജ്വലനം: Keep away from open flames, sparks, and other ignition sources. Do not smoke while using the product.
- സംഭരണം: Store in a cool, dry, well-ventilated place, away from direct sunlight and extreme temperatures. Keep container tightly closed when not in use.
- നീക്കം ചെയ്യൽ: Dispose of product residues and empty containers according to local regulations. Do not pour into drains or watercourses.
- പ്രഥമ ശ്രുശ്രൂഷ: In case of contact with skin, wash thoroughly with soap and water. In case of eye contact, rinse immediately with plenty of water for several minutes and seek medical advice. If swallowed, do not induce vomiting; seek medical attention immediately.
3. തയ്യാറാക്കൽ
Proper preparation is crucial for achieving the best results and ensuring the longevity of the finish.
- ഉപരിതല അവസ്ഥ: The wood surface must be clean, dry, and frost-free. It should be free from dirt, dust, grease, wax, and old flaking paints or varnishes.
- സാൻഡിംഗ്: Sand the wood surface thoroughly. For interior wood, a final sanding with P120-P150 grit sandpaper is generally recommended. For exterior wood, P80-P120 grit is often sufficient. Remove all sanding dust completely before application.
- Wood Type: Ensure the wood is suitable for oil-based finishes. For exotic or oily woods, a trial application on an inconspicuous area is recommended to check for adhesion and color.
- ഇളക്കിവിടുന്നത്: Stir the OSMO One Coat Only HS-Plus thoroughly before use. Ensure all pigments are evenly distributed from the bottom of the can. Continue stirring periodically during application.
- Test Application: Always perform a test application on a small, inconspicuous area of the wood to assess color, adhesion, and overall appearance before proceeding with the entire project.
4. Application (Setup & Operating)
Follow these steps for optimal application of OSMO One Coat Only HS-Plus:
- Application Tools: Use a natural bristle brush, a microfiber roller, or an OSMO Floor Brush for larger areas.
- ആദ്യ കോട്ട്: Apply a very thin, even coat along the wood grain. Ensure the product is spread thinly and evenly. Remove any excess product immediately with a clean, lint-free cloth.
- കവറേജ്: One liter of OSMO One Coat Only HS-Plus covers approximately 275 square feet (25 square meters) with a single coat, depending on the wood type and surface absorbency.
- ഉണക്കൽ സമയം: Allow approximately 12 hours for drying under good ventilation and normal room conditions (approx. 23°C/50% relative humidity). Lower temperatures or higher humidity will extend drying times. Ensure the surface is completely dry before light use.
- ക്യൂറിംഗ് സമയം: The finish will be fully cured and hardened after approximately 2-3 days. Avoid heavy use or placing heavy objects on the surface during this period.
- ക്ലീനിംഗ് ടൂളുകൾ: Clean brushes and tools immediately after use with OSMO Brush Cleaner or mineral spirits.
Image 4.1: A close-up of a wood sample treated with OSMO One Coat Only HS-Plus, showcasing the FIR Green color and the natural wood grain.
5. പരിപാലനം
Proper maintenance will help preserve the beauty and protective qualities of your OSMO finish.
- പതിവ് വൃത്തിയാക്കൽ: പൊതുവായ വൃത്തിയാക്കലിനായി, പരസ്യം ഉപയോഗിക്കുകamp cloth and a mild, pH-neutral cleaner. Avoid harsh chemical cleaners or abrasive pads, as these can damage the finish.
- സ്പോട്ട് ക്ലീനിംഗ്: For stubborn stains, use OSMO Wash and Care or a similar product specifically designed for oiled wood surfaces.
- വീണ്ടും അപേക്ഷിക്കൽ: The frequency of re-application depends on wear and exposure. For exterior surfaces, re-apply when the finish starts to show signs of weathering or fading, typically every 2-5 years. For interior surfaces, re-application is less frequent, often only when the surface appears dull or worn. No sanding is required for re-application; simply clean the surface and apply another thin coat.
- അമിതമായ ഈർപ്പം ഒഴിവാക്കുക: While water-repellent, avoid leaving standing water on the surface for extended periods. Wipe up spills promptly.
6. പ്രശ്നപരിഹാരം
Here are solutions to common issues that may arise during or after application:
| ഇഷ്യൂ | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Uneven Finish / Patchiness | Product applied too thickly or unevenly; insufficient stirring; surface not properly prepared. | Ensure thorough stirring before and during application. Apply very thin, even coats. Remove excess product immediately. Ensure surface is clean and evenly sanded. |
| Slow Drying Time | Poor ventilation; high humidity; low temperature; product applied too thickly. | Increase ventilation. Ensure room temperature is adequate (approx. 23°C). Apply thinner coats. |
| Sticky Surface After Drying | Excess product not wiped off; product applied too thickly. | Wipe off any excess product immediately after application. If already dry, lightly sand the sticky area with fine sandpaper (P220-P240) and re-apply a very thin coat, ensuring all excess is removed. |
| Poor Adhesion / Peeling | Surface not clean (grease, wax, old finish); wood moisture content too high. | Ensure surface is thoroughly cleaned and free of contaminants. Allow wood to dry completely before application. |
7 സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: OSMO
- മോഡൽ നമ്പർ: 924225
- നിറം: FIR Green
- ഫിനിഷ് തരം: Satin-Matte
- മെറ്റീരിയൽ അനുയോജ്യത: മരം
- ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾ: Exterior and Interior wood surfaces
- യൂണിറ്റുകളുടെ എണ്ണം: 84.54 ഫ്ലൂയിഡ് ഔൺസ് (2.5 ലിറ്റർ)
- കവറേജ്: Approximately 275 sq ft (25 m²) per liter per coat
- ഉണക്കൽ സമയം: Approx. 12 hours (under normal conditions)
8. വാറൻ്റിയും പിന്തുണയും
OSMO products are manufactured to high-quality standards. For specific warranty information regarding the OSMO One Coat Only HS-Plus, please refer to the official OSMO webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി നേരിട്ട് ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
For technical assistance, product inquiries, or support, please visit the official OSMO webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ പ്രാദേശിക വിതരണക്കാരനെ ബന്ധപ്പെടുക.
