1. ആമുഖം
This manual provides detailed instructions for the safe and effective use of your Stanley Fatmax 0-42-086 Digital Level. Please read these instructions carefully before operating the device and retain them for future reference.
The Stanley Fatmax 0-42-086 is a 120cm digital level designed for precise measurement of angles and slopes. It features a digital display, 360° readout capability, and a hold function for convenience in various working conditions.
2 സുരക്ഷാ വിവരങ്ങൾ
Always observe basic safety precautions when using this tool to reduce the risk of injury. Keep the tool clean and dry. Do not expose the tool to extreme temperatures or moisture. Use the tool only for its intended purpose.
3. ഉൽപ്പന്ന ഘടകങ്ങൾ
Familiarize yourself with the main components of your digital level:
- ഡിജിറ്റൽ ഡിസ്പ്ലേ
- Control Buttons (On/Off, Hold, Reference, Calibrate, Unit Selection)
- Spirit Vials (3 vials)
- Measuring Surface
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ്
ചിത്രം 1: ക്ലോസ് അപ്പ് view of the digital display and control buttons on the Stanley Fatmax digital level. Buttons include On/Off, Hold, Reference, Calibrate, and unit selection.
ചിത്രം 2: Another perspective of the digital display and control buttons, showing the ergonomic design for easy access during operation.
4. സജ്ജീകരണം
4.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
The digital level requires batteries for operation. Locate the battery compartment, typically on the side or back of the digital module. Insert the required batteries, ensuring correct polarity (+/-). Close the compartment securely.
Note: The product specifications indicate "Batteries Included? No" and "Batteries Required? No" which may be a data discrepancy. Assume batteries are required and not included.
4.2 പ്രാരംഭ പവർ ഓൺ
അമർത്തുക ഓൺ/ഓഫ് button to power on the device. The digital display will illuminate and show the current angle or slope.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
5.1 പവർ ഓൺ/ഓഫ്
അമർത്തുക ഓൺ/ഓഫ് button to turn the digital level on or off.
5.2 അളവുകൾ എടുക്കൽ
Place the measuring surface of the level firmly against the object you wish to measure. The digital display will show the angle in degrees, percentage, or mm/m, depending on the selected unit.
ചിത്രം 3: A user holding the Stanley Fatmax digital level to measure an angle. The digital display is visible for easy reading.
5.3 360° Readout
The level features a 360° readout, meaning the display automatically flips when the level is inverted, ensuring the reading is always upright and easy to read from any orientation.
5.4 ഹോൾഡ് ഫംഗ്ഷൻ
അമർത്തുക പിടിക്കുക button to freeze the current measurement on the display. This is useful for taking readings in difficult-to-see areas or when you need to record a specific value. Press പിടിക്കുക again to release the function.
5.5 യൂണിറ്റ് തിരഞ്ഞെടുപ്പ്
Use the unit selection button (often labeled with °/%/mm/m or similar icon) to cycle through different measurement units: degrees (°), percentage (%), and millimeters per meter (mm/m).
5.6 Reference Function
ദി റഫറൻസ് function allows you to set the current position as a new "0" reference point. This is useful for measuring relative angles from a specific surface. To activate, place the level on your desired reference surface and press the റഫറൻസ് button. The display will show "0.0" and subsequent measurements will be relative to this new reference.
5.7 കാലിബ്രേഷൻ
For optimal accuracy, periodic calibration may be required. To calibrate the level:
- Place the level on a flat, stable surface.
- അമർത്തുക കാലിബ്രേറ്റ് ചെയ്യുക button. Follow the on-screen prompts, which typically involve rotating the level 180 degrees and pressing the button again.
- Refer to the specific calibration sequence indicated on the device's display or a more detailed manual if available.
6. പരിപാലനം
6.1 വൃത്തിയാക്കൽ
Wipe the level with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the display or housing. Ensure the device is dry before storage.
6.2 സംഭരണം
Store the digital level in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
ചിത്രം 4: The Stanley Fatmax digital level stored in its protective carrying case, which helps protect it from dust and damage during transport and storage.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഡിസ്പ്ലേ ഓണാക്കുന്നില്ല | ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്ത ബാറ്ററികൾ. | ബാറ്ററി പോളാരിറ്റി പരിശോധിക്കുക. ആവശ്യമെങ്കിൽ ബാറ്ററികൾ മാറ്റിസ്ഥാപിക്കുക. |
| കൃത്യമല്ലാത്ത വായനകൾ | Needs calibration; dirty measuring surface. | Perform calibration as per section 5.7. Clean the measuring surface. |
| Backlight won't switch off | Possible internal fault or stuck button. | Try removing and reinserting batteries. If problem persists, contact customer support. |
| Horizontal level appears loose | Manufacturing defect or damage. | This indicates a potential defect. Contact customer support for assistance. |
8 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: 0-42-086
- ബ്രാൻഡ്: സ്റ്റാൻലി ഫാറ്റ്മാക്സ്
- നീളം: 120 സെ.മീ
- ഡിജിറ്റൽ കൃത്യത: 0.10° at level and plumb, 0.20° at other angles
- വായിക്കുക: 360°
- ഊർജ്ജ സ്രോതസ്സ്: ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)
- മെറ്റീരിയൽ: Metal, Plastic, Paper (packaging)
- ഉൽപ്പന്ന അളവുകൾ: 18 x 7.5 x 134.5 സെ.മീ
- ഇനത്തിൻ്റെ ഭാരം: 1.9 കി.ഗ്രാം
9. വാറൻ്റി വിവരങ്ങൾ
Specific warranty details for the Stanley Fatmax 0-42-086 Digital Level are not provided in this document. Please refer to the product packaging, official Stanley Fatmax website, or your point of purchase for comprehensive warranty information.
10. ഉപഭോക്തൃ പിന്തുണ
For technical assistance, spare parts, or service inquiries, please contact Stanley Fatmax customer support through their official website or the contact information provided with your product purchase.
