1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Johnson Controls VA-720x Series Electric Actuator, specifically model VA-7202-1001, is designed for precise incremental or proportional control of valves in HVAC applications. This robust, non-spring-return, synchronous, motor-driven electric actuator provides a minimum seating force of 180 lb. (800 N), ensuring reliable operation in a compact and easily installable package.
പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:
- Compact Unit: Delivers 180 lb. force (800 N) output, suitable for a wide range of applications.
- Magnetic Clutch: Ensures constant output force for positive valve close-off and protects the motor under stall conditions.
- നീണ്ടുനിൽക്കുന്ന നിർമ്മാണം: Designed for extended cycle life.
- Easy Field Mounting: Unique yoke design simplifies installation and stroke adjustment when mounting to valves.
- Selectable Action: Offers selectable direct and reverse action for simplified setup.
Figure 1: The Johnson Controls VA-7202-1001 Electric Valve Actuator shown in its original product packaging.
2. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും
The VA-720x Series actuator is designed for straightforward installation. It can be field-mounted to VBC Series Bronze Cage Trim Valves and either factory or field-mounted to VG7000 Series Bronze Control Valves. The unique yoke design facilitates easy attachment and reduces the time required for stroke adjustment.
2.1. വർദ്ധിച്ചുവരുന്ന പരിഗണനകൾ
- Ensure the valve is compatible with the VA-720x series actuator.
- Verify adequate space for installation and future maintenance.
- Follow all local electrical codes and safety regulations during installation.
2.2. ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ
The actuator accepts incremental control from a three-wire 24 VAC control signal or a proportional DC control signal (up to 10 V maximum). Refer to the wiring diagram provided with the product for specific connection details. Ensure power is disconnected before making any electrical connections.
ചിത്രം 2: ആന്തരിക view of the VA-7202-1001 actuator, showing the motor and control circuitry, with the protective blue cover removed.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The VA-720x Series actuator provides precise control over valve positions. Once installed and wired correctly, the actuator responds to the input control signal to modulate the valve's stroke.
3.1. Control Signal Input
- Incremental Control: Utilizes a three-wire 24 VAC signal for step-by-step valve positioning.
- ആനുപാതിക നിയന്ത്രണം: Responds to a DC control signal ranging from 0 to 10 VDC, allowing for fine modulation of the valve.
3.2. Direct and Reverse Action
The actuator features selectable direct and reverse action. This setting determines whether an increase in the control signal results in the valve opening or closing. Consult the product's technical documentation for instructions on how to configure this setting to match your system's requirements.
4. പരിപാലനം
The Johnson Controls VA-720x Series Electric Valve Actuator is designed for durable and reliable operation with minimal maintenance requirements. Its robust construction contributes to a longer service life.
4.1. പതിവ് പരിശോധനകൾ
- Periodically inspect the actuator and its connections for any signs of wear, damage, or loose wiring.
- Ensure the mounting is secure and free from vibration.
- Keep the exterior of the unit clean and free from dust or debris.
For any internal servicing or complex repairs, it is highly recommended to contact a qualified service technician or Johnson Controls support.
5. പ്രശ്നപരിഹാരം
If the VA-7202-1001 actuator is not functioning as expected, consider the following basic troubleshooting steps:
- ചലനമില്ല:
- Verify that the actuator is receiving the correct power supply (24 VAC).
- Check all electrical connections for proper seating and continuity.
- Ensure the control signal (incremental or proportional) is present and within the specified range.
- Incorrect Movement/Positioning:
- Confirm that the direct/reverse action setting is configured correctly for your application.
- നിയന്ത്രണ സിഗ്നലിന്റെ സമഗ്രത പരിശോധിക്കുക.
- Inspect the mechanical linkage between the actuator and the valve for any obstructions or damage.
- അസാധാരണമായ ശബ്ദം:
- Ensure the actuator is securely mounted and not vibrating against other components.
- If the noise persists, it may indicate an internal mechanical issue. Discontinue use and contact a qualified technician.
For issues not resolved by these steps, or for complex diagnostics, contact Johnson Controls technical support or a certified service professional.
6 സ്പെസിഫിക്കേഷനുകൾ
The following table outlines the key specifications for the Johnson Controls VA-7202-1001 Electric Valve Actuator:
| സ്പെസിഫിക്കേഷൻ | മൂല്യം |
|---|---|
| ബ്രാൻഡ് | ജോൺസൺ കൺട്രോൾസ് |
| മോഡൽ നമ്പർ | വിഎ-7202-1001 |
| വിവരണം | Electric Valve Actuator, Proportional: 0 to 10 VDC, 0 to 20 mA |
| സിഗ്നൽ നിയന്ത്രിക്കുക | Incremental (3-wire 24 VAC) or Proportional (0-10 VDC) |
| Seating Force | 180 lb. (800 N) minimum |
| സ്ട്രോക്ക് | Up to 3/4 in. (19.05 mm) |
| മെറ്റീരിയൽ | Bronze (as per product details) |
| പാക്കേജ് അളവുകൾ | 13.82 x 9.72 x 4.57 ഇഞ്ച് |
| ഭാരം | 4.5 പൗണ്ട് |
| നിർമ്മാതാവ് | Johnson Controls Inc |
| ആദ്യ തീയതി ലഭ്യമാണ് | ജൂലൈ 5, 2012 |
Figure 3: Product label from the packaging, confirming model VA-7202-1001 and key specifications.
7. വാറൻ്റിയും പിന്തുണയും
Specific warranty terms and conditions for the Johnson Controls VA-7202-1001 Electric Valve Actuator are typically provided at the point of purchase or can be obtained directly from Johnson Controls or an authorized distributor. It is recommended to retain your proof of purchase for warranty claims.
For technical support, product inquiries, or service, please contact Johnson Controls customer service or visit their official website. Always refer to the official documentation provided with your product for the most accurate and up-to-date information.
