മാനുവലുകൾ+

YELLOW JACKET 93560

YELLOW JACKET 93560 Superevac Single Phase Pump Instruction Manual

മോഡൽ: 93560

ബ്രാൻഡ്: മഞ്ഞ ജാക്കറ്റ്

ഉൽപ്പന്നം കഴിഞ്ഞുview

The YELLOW JACKET 93560 Superevac Single Phase Pump is a highly efficient, two-stage rotary vane oil-sealed pump designed for professional use. It is field-rated at 15 microns or better, indicating superior vacuum performance. This pump is engineered for ease of use and maintenance, featuring several innovative design elements.

YELLOW JACKET 93560 Superevac Single Phase Pump

Image: The YELLOW JACKET 93560 Superevac Single Phase Pump, a robust silver-colored unit with a black motor housing, a carrying handle, and a vacuum indicator gauge on the top surface. The "YELLOW JACKET Superevac 6" logo is visible on the side.

പ്രധാന സവിശേഷതകൾ:

  • Isolation Valve: Allows for oil changes without losing vacuum in the system.
  • Built-in Vacuum Indicator Gauge: Provides real-time vacuum level monitoring.
  • Wide-Mouth Oil Reservoir Port: Facilitates easier and cleaner oil filling. This port also doubles as the pump exhaust and is threaded to attach a garden hose for remote exhausting.
  • Large Oil Sight Glass: Enables easy monitoring of the oil level.
  • Large Brass Oil Drain: Designed for easy access and fast oil changes.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before operating the YELLOW JACKET 93560 Superevac pump, ensure all components are present and undamaged. Follow these steps for proper setup:

  1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the pump from its packaging. Inspect for any visible damage that may have occurred during shipping.
  2. പ്ലേസ്മെൻ്റ്: Position the pump on a stable, level surface in a well-ventilated area. Ensure adequate clearance around the pump for air circulation and access for maintenance.
  3. എണ്ണ നിറയ്ക്കൽ: The pump may be shipped without oil or with a small amount for testing. Before first use, fill the oil reservoir with the recommended vacuum pump oil. Use the wide-mouth oil reservoir port for clean filling. Monitor the oil level through the large oil sight glass. Do not overfill.
  4. പവർ കണക്ഷൻ: Connect the pump to a grounded 115V, 60 Hz power outlet. Ensure the power supply matches the pump's requirements.
  5. പ്രാരംഭ പരിശോധന: Before connecting to a system, briefly turn on the pump to ensure it operates smoothly and quietly. Observe the oil level and ensure no leaks are present.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Superevac pump is designed for efficient evacuation of refrigeration and air conditioning systems. Follow these guidelines for optimal performance:

  1. സിസ്റ്റം കണക്ഷൻ: Connect the pump to the system requiring evacuation using appropriate vacuum hoses and fittings. Ensure all connections are tight to prevent leaks.
  2. സ്റ്റാർട്ടപ്പ്: Turn on the pump. The built-in vacuum indicator gauge will begin to show the vacuum level as the pump operates.
  3. Monitoring Vacuum: Continuously monitor the vacuum indicator gauge to ensure the desired vacuum level is achieved. The pump is field-rated at 15 microns or better.
  4. Using the Isolation Valve: The isolation valve allows for oil changes without breaking the vacuum in the system. To change oil during operation, close the isolation valve, perform the oil change, and then reopen the valve.
  5. Exhaust Management: The wide-mouth oil reservoir port doubles as the pump exhaust. If desired, a garden hose can be threaded onto this port to direct exhaust to a remote location, especially in confined spaces or when dealing with large amounts of moisture.
  6. ഷട്ട് ഡൗൺ: Once the desired vacuum is achieved and maintained, close the system's service valves. Turn off the pump and disconnect the hoses.

മെയിൻ്റനൻസ്

Regular maintenance is crucial for the longevity and optimal performance of your YELLOW JACKET 93560 Superevac pump. Adhere to the following maintenance schedule:

  • എണ്ണ മാറ്റങ്ങൾ:
    • Change the vacuum pump oil frequently, especially after evacuating systems with high moisture content. Dirty or contaminated oil reduces pump efficiency and can cause damage.
    • To change oil, ensure the pump is off and cool. Place a suitable container under the large brass oil drain. Open the drain plug to allow the old oil to flow out.
    • Once drained, close the plug and refill with new, clean vacuum pump oil through the wide-mouth oil reservoir port. Use the oil sight glass to ensure the correct level.
  • എണ്ണ നില നിരീക്ഷണം: Regularly check the oil level through the large oil sight glass. Maintain the oil level between the minimum and maximum indicators.
  • വൃത്തിയാക്കൽ: Keep the exterior of the pump clean and free of dust and debris. Ensure cooling fins are not obstructed to prevent overheating.
  • ഇൻലെറ്റ് ഫിൽട്ടർ: Periodically inspect and clean or replace the inlet filter (if applicable) to prevent contaminants from entering the pump.
  • സംഭരണം: When not in use for extended periods, drain the oil and store the pump in a dry, clean environment. Cap all ports to prevent contamination.

ട്രബിൾഷൂട്ടിംഗ്

This section provides solutions to common issues you might encounter with your Superevac pump. For problems not listed here, contact customer support.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
പമ്പ് ആരംഭിക്കുന്നില്ലവൈദ്യുതിയില്ല, തകരാറുള്ള പവർ കോർഡ്, മോട്ടോർ പ്രശ്നം.Check power connection and outlet. Inspect power cord for damage. If issues persist, contact service.
Pump not pulling sufficient vacuumContaminated or low oil, leaks in system/hoses, clogged inlet.Change oil. Check all connections for leaks. Inspect and clean inlet.
അമിതമായ ശബ്ദം അല്ലെങ്കിൽ വൈബ്രേഷൻLow oil level, worn components, pump not level.Check and add oil. Ensure pump is on a stable, level surface. If noise persists, professional inspection may be needed.
Oil misting from exhaustHigh moisture content in system, overfilled oil.Ensure system is dry before evacuation. Check oil level and drain if overfilled. Consider using an exhaust filter or directing exhaust remotely.

സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the YELLOW JACKET 93560 Superevac Single Phase Pump:

  • മോഡൽ നമ്പർ: 93560
  • ബ്രാൻഡ്: മഞ്ഞ ജാക്കറ്റ്
  • നിർമ്മാതാവ്: Ritchie Engineering Co.
  • വാല്യംtage: 115 വോൾട്ട് (എസി)
  • ആവൃത്തി: 60 Hz
  • ഫ്ലോ റേറ്റ്: 6 CFM (മിനിറ്റിൽ ക്യൂബിക് അടി)
  • ആത്യന്തിക വാക്വം: 15 Microns or better
  • ഇനത്തിൻ്റെ ഭാരം: 31.5 പൗണ്ട്
  • പാക്കേജ് അളവുകൾ: 19.1 x 14.1 x 8.4 ഇഞ്ച്
  • മെറ്റീരിയൽ: Brass (components)
  • നിറം: Yellow (accents)
  • ഊർജ്ജ സ്രോതസ്സ്: കോർഡഡ് ഇലക്ട്രിക്

വാറൻ്റിയും പിന്തുണയും

The YELLOW JACKET 93560 Superevac Single Phase Pump is manufactured by Ritchie Engineering Co. For specific warranty information, technical support, or service inquiries, please contact Ritchie Engineering Co. directly or refer to the warranty card included with your product.

വാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കാൻ ശുപാർശ ചെയ്യുന്നു.

For additional support, you may also visit the official YELLOW JACKET webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത ഡീലറെ ബന്ധപ്പെടുക.